Difference between revisions of "Signet"
(→Start up a node (issuer))
|Line 175:||Line 175:|
$ ./bitcoin-cli -datadir=$datadir importprivkey $PRIVKEY
$ ./bitcoin-cli -datadir=$datadir importprivkey $PRIVKEY
Revision as of 12:12, 11 July 2019
Signet is a proposed new test network for the Bitcoin block chain which adds an additional signature requirement to block validation. Signet is similar in nature to testnet, but more reliable and centrally controlled. There is a default signet network ("Signet Global Test Net II" as of this writing), but anyone can run their own signet network at their whim.
Run bitcoind with the
-signet flag to use the default global signet (or put
signet=1 in the
bitcoin.conf file). If you wish to use a custom signet, you need to provide the block challenge (aka the block script) using
-signet_blockscript=<hex> and preferably also at least one seed node using
- 1 Differences
- 2 Why run Signet?
- 3 Genesis Block
- 4 Getting Started
- 5 External links
- 6 Custom Signet
- Default Bitcoin network protocol listen port is 38333 (instead of 8333)
- Default RPC connection port is 38332 (instead of 8332)
- Address prefixes are different: pubkey=
- The protocol message header bytes are
- Genesis block is generated based on the signet blockscript (and is thus not actually valid)
- Segwit is always enabled
- Additional consensus requirement that the coinbase witness commitment contains an extended signet commitment, which is a script satisfying the block script (usually a k-of-n multisig)
Why run Signet?
- You are an Instructor, and want to run a controlled Bitcoin network environment for teaching purposes.
- You are a Software Developer, and want to test your software.
- You want to try out experimental changes that you want to implement in Bitcoin.
- You want to test long-term running software and don't want to deal with tens of thousands of block reorgs, or days of no blocks being mined, as is the case with Testnet.
- You want an easy way to test double spends (signet plans to include support for automated double spends, where you provide two conflicting transactions and they are mined in order, with a reorg happening between them).
Each signet network has its own genesis block. The coinbase signature of the genesis block for a signet network with the blockscript
S is calculated as
and the output is simply
The nTime is
1534313275, the nonce is
0, and the nBits (difficulty target) is
0x1e2adc28 (POW limit
Fetch and compile signet
$ git clone https://github.com/kallewoof/bitcoin.git signet $ cd signet $ git checkout signet-0.18 $ ./autogen.sh $ ./configure $ make -j5
Create bitcoin.conf file and start up the daemon
$ cd src $ mkdir signet $ echo "signet=1 daemon=1" > signet/bitcoin.conf $ ./bitcoind -datadir=signet
Verify that you're connected
$ ./bitcoin-cli -datadir=signet getconnectioncount ***SHOULD BE MORE THAN ZERO*** $ ./bitcoin-cli -datadir=signet getblockcount ***SHOULD BE MORE THAN ZERO***
Get some coins
There is a command line tool you can use to get coins directly to your instance of Signet, assuming you are on the default network. You can also use the faucet online with an address of yours.
Using online faucet
You first need an address
$ ./bitcoin-cli -datadir=signet getnewaddress
Then go to a faucet, e.g. https://signet.bc-2.jp and enter your address.
Using the command line tool
The tool is in
contrib/signet and is called
getcoins.sh. It takes the path to
bitcoin-cli and an optional
--faucet=[url] followed by any number of arguments to
$ cd ../contrib/signet $ ./getcoins.sh ../../src/bitcoin-cli -datadir=../../src/signet Payment of 10.00000000 BTC sent with txid c0bfa...
Check that you received the coins
Check your faucet transaction confirming at e.g. https://explorer.bc-2.jp and then send coins around to people and/or use signet for testing your wallet/etc.
You can immediately see the amount using
$ cd ../../src # if you were in contrib/signet $ ./bitcoin-cli -datadir=signet getunconfirmedbalance
You can also see info about the transaction that the faucet gave you.
$ ./bitcoin-cli -datadir=signet gettransaction THETXID
Once it has confirmed, you should see it in
$ ./bitcoin-cli -datadir=signet getbalance
Can also ping @kallewoof on IRC (freenode)/Twitter.
Creating your own signet involves a couple of steps: generate keys used for signing, define the block script, start up a node running on the new signet, and import the private key in order to sign blocks.
Generating keys used for signing a block
The most straightforward way is to simply start up a signet instance and then generating a new key from there.
$ cd PATHTOBITCOIN/bitcoin/src $ ./bitcoind -signet -daemon $ ADDR=$(./bitcoin-cli -signet getnewaddress) $ PRIVKEY=$(./bitcoin-cli -signet dumpprivkey $ADDR) $ ./bitcoin-cli -signet getaddressinfo $PRIVKEY | grep pubkey "pubkey": "02c60c3940e5REDACTEDbd0148cd",
We need to jot down the privkey (
echo $PRIVKEY) and the pubkey (here
Defining the block script
The block script is just like any old Bitcoin script, but the most common type is a k-of-n multisig. Here we will do a 1-of-1 multisig with our single pubkey above. Our script becomes
51"1" (signature count)
21Push 0x21=33 bytes (the length of our pubkey above)
51"1" (pubkey count)
Put together, our
-signet_blockscript value becomes
Start up a node (issuer)
For the network to be useful, it needs to be generating blocks at decent intervals, so let's start up a node that does that (it may be useful to also use that node as a seed node for other peers).
Note that we are importing
$PRIVKEY at the end; any node that needs to issue blocks must import the privkey we generated above, or it will fail to sign blocks.
$ ./bitcoin-cli -signet stop $ datadir=$HOME/signet-custom $ mkdir $datadir $ echo "signet=1 [signet] daemon=1 signet_blockscript=512102c60c3940e5REDACTEDbd0148cd51ae" > $datadir/bitcoin.conf $ ./bitcoind -datadir=$datadir $ ./bitcoin-cli -datadir=$datadir importprivkey $PRIVKEY
Note: if you run into errors above, you may have a different signet running, which is blocking the ports. Either stop that, or set port and rpcport in the
$datadir/bitcoin.conf file under the
[signet] section and try again from the
bitcoind part above.
Lastly, we start the issuer script located in
$ cd ../contrib/signet $ ./issuer.sh 540 ../../src/bitcoin-cli -datadir=$datadir - checking node status - 23:51:01: node OK with 0 connection(s) - 23:51:01: mining at maximum capacity with 540 second delay between each block - 23:51:01: hit ^C to stop - 23:51:01: generating next block - 23:51:08: mined block 1 0000321422407052c06fef1eacbee402571787c9828051981adfbb5d50a2330a to 0 peer(s); idling for 540 seconds
This script will keep on mining blocks every 540 seconds (actually it will take about 60 seconds to generate a block after the difficulty has stabilized, so you should be seeing one block every 600 seconds) until you hit ctrl-C. It may be a good idea to run this in a screen, so you can check back on it occasionally.
You may also want to run the issuer with a lower idle time initially, so you get some mature coinbase outputs faster.
Next is to have your friends/colleagues/etc join the network by setting the
signet_blockscript to the same as above, and connecting to your node.