Clearing Up Misconceptions About Full Nodes
This article was written in March 2016 to clear up misconceptions common in the bitcoin community at the time.
- 1 Myth: There are only about 5500 full nodes worldwide
- 2 Myth: The number of these nodes matters and/or is too low.
- 3 Myth: There is no incentive to run nodes, the network relies on altruism
- 4 Myth: I can just set up a node on a cloud server instance and leave it
- 5 Myth: Running a full node is not recommended, most people should use a lightweight client
- 6 How to run a full node as your wallet
- 7 Further Reading
- 8 References
Myth: There are only about 5500 full nodes worldwide
This number comes from sites like this and it measured by trying to connect to every nodes on their open ports.
Problem is, not all nodes actually have open ports that can be probed. Either because they are behind firewalls or because their users have configured them to not listen for connections.
Nobody knows how many full nodes there are, since many people don't know how to forward ports behind a firewall, and bandwidth can be costly, its quite likely that the number of nodes with closed ports is at least another several thousand.
Nodes with open ports are able to upload blocks to new full nodes. In all other ways they are the same as nodes with closed ports. But because open-port-nodes can be measured and closed-port-nodes cannot, some members of the bitcoin community have been mistaken into believing that open-port-nodes are all that matters.
Very roughly estimating the total node count
(Original research by theymos on June 6, 2016 18:30 UTC.)
According to getaddr.bitnodes.io, there are 5834 listening full nodes. Assuming they're all using default Bitcoin Core settings, they'll each provide 117 connection slots to the network on net (125 provided minus 8 consumed). SPV nodes typically use 4 connection slots, and full nodes typically use 8. So the network can support a maximum of around 170,644 SPV nodes or 85,322 non-listening full nodes at one time. This is roughly the upper limit for the number of wallets that are online and connected to the Bitcoin network at any one time. (If there were more people online at once than that, people would start seeing various issues.) This doesn't include wallets that don't actually connect to the Bitcoin network, of course.
If I look at my long-running listening full node, I currently have incoming connections from 40 full nodes and 10 SPV nodes via the Internet, and 11 full nodes via my Tor hidden service. So if I ignore the hidden service connections because they are somewhat unusual, and I assume that my node is typical otherwise, it seems reasonable to make a very rough guess that there are at this moment (40*5834)/8 = 29,170 full nodes (5834 listening) and (10*5834)/4 = 14,585 lightweight nodes connected to the network.
Myth: The number of these nodes matters and/or is too low.
Nodes with open ports are useful to the bitcoin network because they help bootstrap new nodes by uploading historical blocks, they are a measure of bandwidth capacity. Right now there is no shortage of bandwidth capacity, and if there was it could be easily added by renting cloud servers.
The problem is not bandwidth or connections, but trust, security and privacy. Let me explain.
Full nodes are able to check that all of bitcoin's rules are being followed. Rules like following the inflation schedule, no double spending, no spending of coins that don't belong to the holder of the private key and all the other rules required to make bitcoin work (e.g. difficulty)
Full nodes are what make bitcoin trustless. No longer do you have to trust a financial institution like a bank or paypal, you can simply run software on your own computer. To put simply, the only node that matters is the one you use
Myth: There is no incentive to run nodes, the network relies on altruism
Using a full node as your wallet is the only way to know for sure that none of bitcoin's rules have been broken. Rules like no coins were spent not belonging to the owner, that no coins were spent twice, that no inflation happens outside of the schedule and that all the rules needed to make the system work are followed (e.g. Difficulty.) All other kinds of wallet involve trusting a third party server.
All these checks done by full nodes also increase the security. There are many attacks possible against lightweight wallets that do not affect full node wallets.
This is not just mindless paranoia, there have been real world examples where full node users were unaffected by turmoil in the rest of the bitcoin ecosystem. The 4th July 2015 accidental chain fork effected many kinds of wallets. Here is the wiki page on this event July_2015_chain_forks#Wallet_Advice
Notice how node software updated months ago was completely unaffected by the fork. All other wallets required either extra confirmations or checking that the third-party institution was running the correct version. For example a bitcoin business, like an exchange, marketplace or online store should always use a full node for security.
Full nodes wallets are also currently the most private way to use Bitcoin, with nobody else learning which bitcoin addresses belong to you. All other lightweight wallets leak information about which addresses are yours because they must query third-party servers. The Electrum servers will know which addresses belong to you and can link them together. Despite bloom filtering, lightweight wallets based on BitcoinJ do not provide much privacy against nodes who connected directly to the wallet or wiretappers.
For some use cases, such privacy may not be required. But an important reason to run a full node and use it as a wallet is to get the full privacy benefits.
Myth: I can just set up a node on a cloud server instance and leave it
To get the benefits of running a full node, you must use it as your wallet, preferably on hardware you control.
Most people who do this do not use a full node as their wallet. Unfortunately because Bitcoin has a similar name to Bittorrent, some people believe that upload capacity is the most important thing for a healthy network. As I've explained above: bandwidth and connections are not a problem today; trust, security and privacy are.
Myth: Running a full node is not recommended, most people should use a lightweight client
If you cannot spare the disk space to store the blockchain, you can enable pruning. In Bitcoin Core 0.12, pruning being enabled will leave the wallet enabled. Altogether this should require less than 900MB of hard disk space.
If you cannot spare the bandwidth to upload blocks to other nodes, there are number of options to reduce or eliminate the bandwidth requirement. These include limiting connections, bandwidth targeting and disabling listening. Bitcoin Core 0.12 has the new option -blocksonly, where the node will not download unconfirmed transaction and only download new blocks. This more than halves the bandwidth usage at the expense of not seeing unconfirmed transactions.
It can be further improved by setting -dbcache=3000 which keeps more of the UTXO set in memory. It reduces the amount of time reading from disk and therefore speeds up synchronization. Tests showed that the entire blockchain can now be synchronized in less than **3 and a half hours** (Note that you'll need Bitcoin Core 0.12 or later to get all these efficiency improvements) Another example with 2h 25m
How to run a full node as your wallet
I think every moderate user of bitcoin would benefit by running a full node and using it as their wallet. There are several ways to do this.
- Run a bitcoin-qt full node.
- Use a lightweight wallet that connects only to your full node (e.g. Multibit connecting only to your node running at home, Electrum connecting only to your own Electrum server)
So what are you waiting for? The benefits are many, the downsides are not that bad. The more people do this, the more robust and healthy the bitcoin ecosystem is.
- http://jonasnick.github.io/blog/2015/02/12/privacy-in-bitcoinj/ Privacy in BitcoinJ