Avalon2 prototype
Documents
Firmware
For latest 703N firmware please goto here: http://downloads.canaan-creative.com/software/avalon/latest/. from 20131229. the cgminer will support both Avalon 110nm and Avalon A3255 prototype machine.
2013-12-07
- 8, 16 miners works just fine
- ISSUE: 32 miners with 10 chips still not working because TIMEOUT issue
- Change `core_count to 64 to compatible with ealier cgminer
- Software should follow equation below when handle A3255 based miner
nonce_send_to_pool = nonce_receive_from_miner-0xc0
- Include all hardware design files under this tar ball
TIMEOUT
- TIMEOUT的有效值范围为[0,255]，FPGA controller根据TIMEOUT的配置来控制申请/计算任务的时间。当TIMEOUT值配置为1时，FPGA controller会每隔0.033s申请一次任务，也表示芯片已计算完当前HASH区间。
- TIMEOUT配置与申请/计算任务时间间隔的公式为
TIME_OF_MINER_FINISH_HASH_RANGE = TIMEOUT * 0.033s TIMEOUT = TIME_OF_MINER_FINISH_HASH_RANGE / 0.033s
- 若FPGA controller连接的一个小模块上的计算能力为10GHs（10个芯片，每芯片1G），则FPGA controller申请任务的时间间隔为
2^32 / 10*1000*1000*1000 = 0.4s 0.4s/0.033s = 12 # TIMEOUT应配置为12
- 如果使用prototype中的FPGA固件，你们的硬件设计一定要满足下面的式子：
发送全部任务的时间 一定要小于 FPGA申请任务的时间(也就是ASIC算完自己区间的时间) ((11+2+chip_num)*4*10/115200)*miner_num*1000 + DELAY_IN_MS*miner_num < (128591 / chip_num / frequency) * 33ms
解释一下： 11+2+chip_num)*4 ==> CHIP_NUM的任务长度，单位Byte ((11+2+chip_num)*4*10/115200)*miner_num*1000 ==> 发送MINER_NUM个这样的任务所需要的时间，单位是ms DELAY_IN_MS*miner_num ==> 总的Delay时间，DELAY_IN_MS见cgminer代码：driver-avalon.c:1132 (128591 / chip_num / frequency) * 33ms ==> TIMEOUT值，详见Wiki文档
几个测试的例子，仅供参考： MINER_NUM:CHIP_NUM:FREQUENCY:TIMEOUT ==> 16:10:1000:12 works fine ==> 16:10:1500:8 works fine ==> 24:10:1000:12 works fine ==> 24:10:1500:8 works fine ==> 32:6:1000:21 works fine ==> 32:6:1500:12 works fine ==> 32:10:1000:12 works fine ==> 32:10:1500:8 not working
Work without LDO RT9187
- Connect the C20 right pad to C15 or C14 left pad
- Please keep the Vcore to between 0.95v and 1.05v, the origin design was 1v.
- If the crystal not working, try to reduce the R28(by default it's 1K), if reduce the R28 didn't make crystal back to working. try repace the crystal with a better brand.
55nm open design
- form
https://github.com/formtapez/avalon https://bitcointalk.org/index.php?topic=323175.0 Supported by official BFGMiner 3.8+
- flyonwall
https://bitcointalk.org/index.php?topic=323175.msg3759895#msg3759895
- Technobit Team
https://bitcointalk.org/index.php?topic=323727.0 here is the design, BOM： http://ge.tt/2B4qW051/v/0?c Here is CGminer patch and dd-wrt cgminer build http://technobit.eu/index.php?controller=attachment&id_attachment=30 Windows drivers http://technobit.eu/index.php?controller=attachment&id_attachment=9 Windows HEXminer software http://technobit.eu/index.php?controller=attachment&id_attachment=29 Specs 16 chip board Hash rate - about 24 Gh/s overclocked 16 bit PIC controller 2 line power suply Voltage controled by command in the software/firmware USB connector molex 4 pin power connector Review: https://bitcointalk.org/index.php?topic=355323.0
- George Hahn
https://github.com/GeorgeHahn/Avalon
- Dan
http://arselin.com/drillbit/2013/12/01/avalon-gen2-miners-by-drillbit-systems/ http://www.drillbitsystem.com/avalon/
- Carlos
https://github.com/ctapang/DesignEntry/
- Zhaodong
https://github.com/BitDragonfly/A3256-mono
- Ardulon 2
https://code.google.com/p/ardulon-miner/source/browse/#svn%2Ftrunk