Avalon nano

From Bitcoin Wiki
Revision as of 08:51, 19 November 2014 by Mikeqin (talk | contribs) (→‎AvalonMiner)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Configrations

  • LPC11u14
 Clock Crystals        48.000 MHz
  • A3233
 Clock Crystals        24.000 MHz

USB: 29F1:33F1

Schematics

BFGMiner

  • Run under Linux
 ./bfgminer \
       -S ICA:/dev/ttyACMx \
       -o stratum+tcp://stratum.ozco.in:80 -O mikeqin.avalon:1234 \
       --set-device ICA:baud=115200 \
       --set-device ICA:reopen=timeout \
       --set-device ICA:work_division=1 \
       --set-device ICA:fpga_count=1 \
       --set-device ICA:probe_timeout=100 \
       --set-device ICA:timing=0.22 \
       --api-listen \
       2>log
  • Run under Windows
 bfgminer.exe ^
       -S ICA:\\.\COMn ^
       -o stratum+tcp://stratum.ozco.in:80 -O mikeqin.avalon:1234 ^
       --set-device ICA:baud=115200 ^
       --set-device ICA:reopen=timeout ^
       --set-device ICA:work_division=1 ^
       --set-device ICA:fpga_count=1 ^
       --set-device ICA:probe_timeout=100 ^
       --set-device ICA:timing=0.22 ^
       --api-listen ^
       2>log

 备注：timing详见bfgminer的README，如果当前配置的频率是400MHz,则Hashrate=400*11.8=~4Gh/s
 <math>\mbox{timing} = \frac{1}{4\times 10^9}\times 10^9</math>
  • BFGMiner MHS Cur
 MHS Cur = Diff1 Work * (Difficulty Accepted/(Difficulty Accepted+Difficulty Rejected+Difficulty Stale)*60/(Elapsed)*71582788/(1000000)
 所有的信息可以通过./bfgminer-rpc -o summary获取。
 注：如果Difficulty Accepted+Difficulty Rejected+Difficulty Stale = 0，则Difficulty Accepted/(Difficulty Accepted+Difficulty Rejected+Difficulty Stale) 取1。
  • BFGMiner release from luck.dashjr
 http://luke.dashjr.org/programs/bitcoin/files/bfgminer/

Cgminer for Avalon nano

  • Cgminer（Icarus）compile guide
 sudo apt-get install libudev-dev 
 ./autogen.sh && ./configure --enable-icarus && make
  • Cgminer（Icarus）Run params
 ./cgminer \
       -o stratum+tcp://stratum.ozco.in:80 -O mikeqin.avalon:1234 \
       --icarus-options 115200:1:1 \
       --icarus-timing 0.22 \
       --api-listen \
       2>log
  Note：Please add 01-cgminer.rules to your udev rules before you run.

LED

IDLE：Green。
Working：From red to blue( frequence high to low)。
Hot Alert：RED blinking。

ULINK 2

SmartPro 5000U-Plus

LPC11u14

  • LPC11U14 LPCXpresso Board Spec
 Processor             NXP's Cortex-M0 LPC11U14 microcontroller in LQFP48 package
 Flash                 32 kB
 Data Memory           6 kB
 Clock Crystals        12.000 MHz crystal for CPU
 Dimensions            35 x 140 mm
 Power                 3.15V-3.3V external powering, or from USB via JTAG probe (LPC-LINK)
 Connectors            
                             • mini-B USB connector for LPC11U14 USB interface
                             • All LPC11U14 pins available on expansion connector (2x27 pin rows, 100 mil pitch, 900 mil between rows)
 Other                  
                             • Embedded JTAG (LPC-LINK) functionality via LPCXpresso toolchain
                             • LPC-LINK can be connected to external target processor after modifications to the LPCXpresso board
                             • LED on PIO0_7
  • LPC-Link diagnostics
 Diagnostics when connecting to LPC-Link
 
 1.  lpc-link info
 crt_emu_lpc11_13_nxp -info-emu -wire=winusb
 
 2.  target info 
 crt_emu_lpc11_13_nxp -info-target -pLPC11U14/201 -wire=winusb -4
 
 3. burn and run axf file
 crt_emu_lpc11_13_nxp -pLPC11U14/201 -wire=winusb -flash-load-exec nxp_lpcxpresso_11u14_periph_blinky.axf
 
 4. info scan
 crt_emu_lpc11_13_nxp -info-scan -wire=winusb
 
 5. semi_host debug
 use newlib semihost
  • Gdb connect
 1. gdb connect
 arm-none-eabi-gdb nxp_lpcxpresso_11u14_periph_blinky.axf
 target extended-remote | crt_emu_lpc11_13_nxp -pLPC11U14/201 -2 -wire=winusb
 load

Firmware

Reflash

Patches

 For what: Cgminer patch.
 From where: Based c5ec1171@https://github.com/BitSyncom/cgminer/tree/avalon2
 Comments: Support avalon3 nano in cgminer.
           Support Icarus protocol.

20140523

  • Avalon3 nano firmware(20140523-dd84b993)
  • Support nonce receive timeout check
  • Support adjust freq for 100Mhz to 360Mhz,freq value after reset is 360Mhz

20140519

  • Avalon3 nano firmware(20140519-8c38877c):first version
  • Avalon3 nano test scripts found here:a3233_avalon_usb_testbench.sh
  • Support adjust freq for 360Mhz to 400Mhz,value after reset is 400Mhz
  • Include avalon3 nano module test(avalon_bsp_testben)
  • bfgminer(0676fa314a9cc1491ad2e5f5c6a5e97f38fa67e3),how to run:http://wiki.0xf8.com/index.php/Bfgminer

NEXT-TESTING

  • NOTICE: Only for testing
  • Adjust LED color according to the temperature

AvalonMiner

20140911

  • Avalon3 nano windows miner(20140911)
  • Beautifull GUI
  • Auto detect Avalon nano

20140803

  • Avalon3 nano windows miner(20140803) first version
  • Support bfgminer only
  • Support icarus protocal

Windows GUI

CLI

  • BFGMiner (C:\Program Files (x86)\Avalon Nano\BfgMiner)
 1. Copy BfgMiner to a safe place.
 2. Uninstall Avalon GUI Miner
 3. Modify the icadbg.cmd(under BfgMiner folder) with your correct com port.
 4. Double click icadbg.cmd.

Links

Retrieved from "https://en.bitcoin.it/w/index.php?title=Avalon_nano&oldid=53145"