BIP 0324

This page describes a BIP (Bitcoin Improvement Proposal). Please see BIP 2 for more information about BIPs and creating them. Please do not just create a wiki page.

Please do not modify this page. This is a mirror of the BIP from the source Git repository here.

  BIP: 324
  Layer: Peer Services
  Title: Version 2 P2P Encrypted Transport Protocol
  Author: Dhruv Mehta <dhruv@bip324.com>
          Tim Ruffing <crypto@timruffing.de>
          Jonas Schnelli <dev@jonasschnelli.ch>
          Pieter Wuille <bitcoin-dev@wuille.net>
  Comments-URI: https://github.com/bitcoin/bips/wiki/Comments:BIP-0324
  Status: Draft
  Type: Standards Track
  Created: 2019-03-08
  License: BSD-3-Clause
  Replaces: 151

Introduction

Abstract

This document proposes a new Bitcoin P2P transport protocol, which features opportunistic encryption, a mild bandwidth reduction, and the ability to negotiate upgrades before exchanging application messages.

Copyright

This document is licensed under the 3-clause BSD license.

Motivation

Bitcoin is a permissionless network whose purpose is to reach consensus over public data. Since all data relayed in the Bitcoin P2P network is inherently public, and the protocol lacks a notion of cryptographic identities, peers talk to each other over unencrypted and unauthenticated connections. Nevertheless, this plaintext nature of the current P2P protocol (referred to as v1 in this document) has severe drawbacks in the presence of attackers:

• While the relayed data itself is public in nature, the associated metadata may reveal private information and hamper privacy of users. For example, a global passive attacker eavesdropping on all Bitcoin P2P connections can trivially identify the source and timing of a transaction.
• Since connections are unauthenticated, they can be tampered with at a low cost and often even with a low risk of detection. For example, an attacker can alter specific bytes of a connection (such as node flags) on-the-fly without the need to keep any state.
• The protocol is self-revealing. For example, deep packet inspection can identify a P2P connection trivially because connections start with a fixed sequence of magic bytes. The ability to detect connections enables censorship and facilitates the aforementioned attacks as well as other attacks which require the attacker to control the connections of victims, e.g., eclipse attacks targeted at miners.

This proposal for a new P2P protocol version (v2) aims to improve upon this by raising the costs for performing these attacks substantially, primarily through the use of unauthenticated, opportunistic transport encryption. In addition, the bytestream on the wire is made pseudorandom (i.e., indistinguishable from uniformly random bytes) to a passive eavesdropper.

• Encryption, even when it is unauthenticated and only used when both endpoints support v2, impedes eavesdropping by forcing the attacker to become active: either by performing a persistent man-in-the-middle (MitM) attack, by downgrading connections to v1, or by spinning up their own nodes and getting honest nodes to make connections to them. Active attacks at scale are more resource intensive in general, but in the case of manual, deliberate connections (as opposed to automatic, random ones), they are also in principle detectable: even very basic checks, e.g., operators manually comparing protocol versions and session IDs (as supported by the proposed protocol), will expose the attacker.
• Tampering, while already an inherently active attack, is costlier if the attacker is forced to maintain the state necessary for a full MitM interception.
• A pseudorandom bytestream excludes identification techniques based on pattern matching, and makes it easier to shape the bytestream in order to mimic other protocols used on the Internet. This raises the cost of a connection censoring firewall, forcing them to either resort to a full MitM attack, or operate on a more obvious allowlist basis, rather than a blocklist basis.

Why encrypt without authentication?

As we have argued above, unauthenticated encryption provides strictly better security than no encryption. Thus, all connections should use encryption, even if they are unauthenticated.

When it comes to authentication, the situation is not as clear as for encryption. Due to Bitcoin's permissionless nature, authentication will always be restricted to specific scenarios (e.g., connections between peers belonging to the same operator), and whether some form of (possibly partially anonymous) authentication is desired depends on the specific requirements of the involved peers. As a consequence, we believe that authentication should be addressed separately (if desired), and this proposal aims to provide a solid technical basis for future protocol upgrades, including the addition of optional authentication (see Private authentication protocols).

Why have a pseudorandom bytestream when traffic analysis is still possible?

Traffic analysis, e.g., observing packet lengths and timing, as well as active attacks can still reveal that the Bitcoin v2 P2P protocol is in use. Nevertheless, a pseudorandom bytestream raises the cost of fingerprinting the protocol substantially, and may force some intermediaries to attack any protocol they cannot identify, causing collateral cost.

A pseudorandom bytestream is not self-identifying. Moreover, it is unopinionated and thus a canonical choice for similar protocols. As a result, Bitcoin P2P traffic will be indistinguishable from traffic of other protocols which make the same choice (e.g., obfs4 and a recently proposed cTLS extension). Moreover, traffic shapers and protocol wrappers (for example, making the traffic look like HTTPS or SSH) can further mitigate traffic analysis and active attacks but are out of scope for this proposal.

Why not use a secure tunnel protocol?

Our goal includes making opportunistic encryption ubiquitously available, as that provides the best defense against large-scale attacks. That implies protecting both the manual, deliberate connections node operators instruct their software to make, and the automatic connections Bitcoin nodes make with each other based on IP addresses obtained via gossip. While encryption per se is already possible with proxy networks or VPN protocols, these are not desirable or applicable for automatic connections at scale:

• Proxy networks like Tor or I2P introduce a separate address space, independent of network topology, with a very low cost per address making eclipse attacks cheaper. In comparison, clearnet IPv4 and IPv6 networks make obtaining multiple network identities in distinct, well-known network partitions carry a non-trivial cost. Thus, it is not desirable to have a substantial portion of nodes be exclusively connected this way, as this would significantly reduce Eclipse attack costs. Additionally, Tor connections come with significant bandwidth and latency costs that may not be desirable for all network users.
• VPN protocols like WireGuard or OpenVPN inherently define a private network, which requires manual configuration and therefore is not a realistic avenue for automatic connections.

Thus, to achieve our goal, we need a solution that has minimal costs, works without configuration, and is always enabled – on top of any network layer rather than be part of the network layer.

Why not use a general-purpose transport encryption protocol?

While it would be possible to rely on an off-the-shelf transport encryption protocol such as TLS or Noise, the specific requirements of the Bitcoin P2P network laid out above make these protocols an unsuitable choice.

The primary requirement which existing protocols fail to meet is a sufficiently modular treatment of encryption and authentication. As we argue above, whether and which form of authentication is desired in the Bitcoin P2P network will depend on the specific requirements of the involved peers (resulting in a mix of authenticated and unauthenticated connections), and thus the question of authentication should be decoupled from encryption. However, native support for a handful of standard authentication scenarios (e.g., using digital signatures and certificates) is at the core of the design of existing general-purpose transport encryption protocols. This focus on authentication would not provide clear benefits for the Bitcoin P2P network but would come with a large amount of additional complexity.

In contrast, our proposal instead aims for a simple modular design that makes it possible to address authentication separately. Our proposal provides a foundation for authentication by exporting a session ID that uniquely identifies the encrypted channel. After an encrypted channel has been established, the two endpoints are able to use any authentication protocol to confirm that they have the same session ID. (This is sometimes called channel binding because the session ID binds the encrypted channel to the authentication protocol.) Since in our proposal, any authentication needs to run after an encrypted connection has been established, the price we pay for this modularity is a possibly higher number of roundtrips as opposed to other protocols that perform authentication alongside the Diffie-Hellman key exchange. However, the resulting increase in connection establishment latency is a not a concern for Bitcoin's long-lived connections, which typically live for hours or even weeks.

Besides this fundamentally different treatment of authentication, further technical issues arise when applying TLS or Noise to our desired use case:

• Neither offers a pseudorandom bytestream.
• Neither offers native support for elliptic curve cryptography on the curve secp256k1 as otherwise used in Bitcoin. While using secp256k1 is not strictly necessary, it is the obvious choice is for any new asymmetric cryptography in Bitcoin because it minimizes the cryptographic hardness assumptions as well as the dependencies that Bitcoin software will need.
• Neither offers shapability of the bytestream.
• Both provide a stream-based interface to the application layer, whereas Bitcoin requires a packet-based interface, resulting in the need for an additional thin layer to perform packet serialization and deserialization.

While existing protocols could be amended to address all of the aforementioned issues, this would negate the benefits of using them as off-the-shelf solution, e.g., the possibility to re-use existing implementations and security analyses.

Goals

This proposal aims to achieve the following properties:

• Confidentiality against passive attacks: A passive attacker having recorded a v2 P2P bytestream (without timing and fragmentation information) must not be able to determine the plaintext being exchanged by the nodes.
• Observability of active attacks: A session ID identifying the encrypted channel uniquely is derived deterministically from a Diffie-Hellman negotiation. An active man-in-the-middle attacker is forced to incur a risk of being detected as peer operators can compare session IDs manually, or using optional authentication methods possibly introduced in future protocol versions.
• Pseudorandom bytestream: A passive attacker having recorded a v2 P2P bytestream (without timing information and fragmentation information) must not be able to distinguish it from a uniformly random bytestream.
• Shapable bytestream: It should be possible to shape the bytestream to increase resistance to traffic analysis (for example, to conceal block propagation), or censorship avoidance.
• Forward secrecy: An eavesdropping attacker who compromises a peer's sessions secrets should not be able to decrypt past session traffic, except for the latest few packets.
• Upgradability: The proposal provides an upgrade path using transport versioning which can be used to add features like authentication, PQC handshake upgrade, etc. in the future.
• Compatibility: v2 clients will allow inbound v1 connections to minimize risk of network partitions.
• Low overhead: the introduction of a new P2P transport protocol should not substantially increase computational cost or bandwidth for nodes that implement it, compared to the current protocol.

Specification

The specification consists of three parts:

• The Transport layer concerns how to set up an encrypted connection between two nodes, capable of transporting application-level messages between them.
• The Application layer concerns how to encode Bitcoin P2P messages and commands for transport by the Transport Layer.
• The Signaling concerns how v2 nodes advertise their support for the v2 protocol to potential peers.

Transport layer specification

In this section, we define the encryption protocol for messages between peers.

Overview and design

We first give an informal overview of the entire protocol flow and packet encryption.

Protocol flow overview

Given a newly established connection (typically TCP/IP) between two v2 P2P nodes, there are 3 phases the connection goes through. The first starts immediately, i.e. there are no v1 messages or any other bytes exchanged on the link beforehand. The two parties are called the initiator (who established the connection) and the responder (who accepted the connection).

1. The Key exchange phase, where nodes exchange data to establish shared secrets.
   • The initiator:
     • Generates a random ephemeral secp256k1 private key and sends a corresponding 64-byte ElligatorSwift-encoded public key to the responder.
     • May send up to 4095 bytes of arbitrary data after their public key, called garbage, providing a form of shapability and avoiding a recognizable pattern of exactly 64 bytes.
   • The responder:
     • Waits until one byte is received which does not match the 12 bytes consisting of the network magic followed by "version\x00". If the first 12 bytes do match, the connection is treated as using the v1 protocol instead.
     • Similarly generates a random ephemeral private key and sends a corresponding 64-byte ElligatorSwift-encoded public key to the initiator.
     • Similarly may send up to 4095 bytes of garbage data after their public key.
   • Both parties:
     • Receive (the remainder of) the full 64-byte public key from the other side.
     • Use X-only ECDH to compute a shared secret from their private key and the exchanged public keys, and deterministically derive from the secret 4 encryption keys (two in each direction: one for packet lengths, one for content encryption), a session id, and two 16-byte garbage terminators (one in each direction) using HKDF-SHA256.
     • Send their 16-byte garbage terminator followed by a garbage authentication packet, an encrypted packet (see further) with arbitrary contents, and associated data equal to the garbage.
     • Receive up to 4111 bytes, stopping when encountering the garbage terminator.
     • Receive an encrypted packet, verify that it decrypts correctly with associated data set to the garbage received, and then ignore its contents.
   • At this point, both parties have the same keys, and all further communication proceeds in the form of encrypted packets. Packets have an ignore bit, which makes them decoy packets if set. Decoy packets are to be ignored by the receiver apart from verifying they decrypt correctly. Either peer may send such decoy packets at any point after this. These form the primary shapability mechanism in the protocol. How and when to use them is out of scope for this document.
2. The Version negotiation phase, where parties negotiate what transport version they will use, as well as data defined by that version.
   • The responder:
     • Sends a version packet with empty content, to indicate support for the v2 P2P protocol proposed by this document. Any other value for content is reserved for future versions.
   • The initiator:
     • Receives a packet, ignores its contents. The idea is that features added by future versions get negotiated based on what is supported by both parties. Since there is just one version so far, the contents here can simply be ignored. But in the future, receiving a non-empty contents here may trigger other behavior; we defer specifying the encoding for such version content until there is a need for it.
     • Sends a version packet with empty content as well, to indicate support for the v2 P2P protocol.
   • The responder:
     • Receives a packet, ignores its contents.
3. The Application phase, where the packets exchanged have contents to be interpreted as application data.
   • Whenever either peer has a message to send, it sends a packet with that application message as contents.

To avoid the recognizable pattern of first messages being at least 64 bytes, a future backwards-compatible upgrade to this protocol may allow both peers to send their public key + garbage + garbage terminator in multiple rounds, slicing those bytes up into messages arbitrarily, as long as progress is guaranteed.

Note that the version negotiation phase does not need to wait for the key exchange phase to complete; version packets can be sent immediately after sending the garbage authentication packet. So the first two phases together, jointly called the handshake, comprise just 1.5 roundtrips:

• the initiator sends public key + garbage
• the responder sends public key + garbage + garbage terminator + garbage authentication packet + version packet
• the initiator sends garbage terminator + garbage authentication packet + version packet

Packet encryption overview

All data on the wire after the garbage terminators takes the form of encrypted packets. Every packet encodes an encrypted variable-length byte array, called the contents, as well as an ignore bit as mentioned before. The total size of a packet is 20 bytes plus the length of its contents.

Each packet consists of:

• A 3-byte encrypted length field, encoding the length of the contents (between 0 and 2²⁴-1, inclusive).
• An authenticated encryption of the plaintext, which consists of:
  • A 1-byte header which consists of transport layer protocol flags. Currently, only the highest bit is defined as the ignore bit. The other bits are ignored, but this may change in future versions.
  • The variable-length contents.

The encryption of the plaintext uses ChaCha20Poly1305, an authenticated encryption with associated data (AEAD) cipher specified in RFC 8439. Every packet's plaintext is treated as a separate AEAD message, with a different nonce for each.

The length must be dealt with specially, as it is needed to determine packet boundaries before the whole packet is received and authenticated. As we want a stream that is pseudorandom to a passive attacker, it still needs encryption. We use unauthenticated ChaCha20 encryption for this, with an independent key. Note that the plaintext length is still implicitly authenticated by the encryption of the plaintext, but this can only be verified after receiving the whole packet. This design is inspired by that of the ChaCha20Poly1305 cipher suite in OpenSSH. messages to rekey the encryption ciphers, in order to provide forward security. </ref> Because only fixed-length chunks (3-byte length fields) are encrypted, we do not need to treat all length chunks as separate messages. Instead, a single cipher (with the same nonce) is used for multiple consecutive length fields. This avoids wasting 61 pseudorandom bytes per packet, and makes the cost of having a separate cipher for length encryption negligible.

In order to provide forward security, the encryption keys for both plaintext and length encryption are cycled every 224 messages, by switching to a new key that is generated by the key stream using the old key.

Handshake: key exchange and version negotiation

Next we specify the handshake of a connection in detail.

As explained before, these messages are sent to set up the connection:

 ----------------------------------------------------------------------------------------------------
 | Initiator                         Responder                                                      |
 |                                                                                                  |
 | x, ellswift_X = ellswift_create(initiating=True)                                                 |
 |                                                                                                  |
 |           --- ellswift_X + initiator_garbage (initiator_garbage_len bytes; max 4095) --->        |
 |                                                                                                  |
 |                                   y, ellswift_Y = ellswift_create(initiating=False)              |
 |                                   ecdh_secret = v2_ecdh(                                         |
 |                                                     y, ellswift_X, ellswift_Y, initiating=False) |
 |                                   v2_initialize(initiator, ecdh_secret, initiating=False)        |
 |                                                                                                  |
 |           <-- ellswift_Y + responder_garbage (responder_garbage_len bytes; max 4095) +           |
 |                    responder_garbage_terminator (16 bytes) +                                     |
 |                    v2_enc_packet(initiator, b'', aad=responder_garbage) +                        |
 |                    v2_enc_packet(initiator, RESPONDER_TRANSPORT_VERSION) ---                     |
 |                                                                                                  |
 | ecdh_secret = v2_ecdh(x, ellswift_Y, ellswift_X, initiating=True)                                |
 | v2_initialize(responder, ecdh_secret, initiating=True)                                           |
 |                                                                                                  |
 |            --- initiator_garbage_terminator (16 bytes) +                                         |
 |                    v2_enc_packet(responder, b'', aad=initiator_garbage) +                        |
 |                    v2_enc_packet(responder, INITIATOR_TRANSPORT_VERSION) --->                    |
 |                                                                                                  |
 ----------------------------------------------------------------------------------------------------

Shared secret computation

The peers derive their shared secret through X-only ECDH, hashed together with the exactly 64-byte public keys' encodings sent over the wire.

def v2_ecdh(priv, ellswift_theirs, ellswift_ours, initiating):
    ecdh_point_x32 = ellswift_ecdh_xonly(ellswift_theirs, priv)
    if initiating:
        # Initiating, place our public key encoding first.
        return sha256_tagged("bip324_ellswift_xonly_ecdh", ellswift_ours + ellswift_theirs + ecdh_point_x32)
    else:
        # Responding, place their public key encoding first.
        return sha256_tagged("bip324_ellswift_xonly_ecdh", ellswift_theirs + ellswift_ours + ecdh_point_x32)

Here, sha256_tagged(tag, x) returns a tagged hash value SHA256(SHA256(tag) || SHA256(tag) || x) as in BIP340.

ElligatorSwift encoding of curve X coordinates

The functions ellswift_create and ellswift_ecdh_xonly encapsulate the construction of ElligatorSwift-encoded public keys, and the computation of X-only ECDH with ElligatorSwift-encoded public keys.

First we define a constant:

• Let c = 0xa2d2ba93507f1df233770c2a797962cc61f6d15da14ecd47d8d27ae1cd5f852.

To define the needed functions, we first introduce a helper function, matching the XSwiftEC function from the SwiftEC paper, instantiated for the secp256k1 curve, with minor modifications. It maps pairs of integers (u, t) (both in range 0..p-1) to valid X coordinates on the curve. Note that the specification here does not attempt to be constant time, as it does not operate on secret data. In what follows, we use the notation from BIP340.

• XSwiftEC(u, t):
  • Alter the inputs to guarantee an X coordinate on the curve:
    • If u mod p = 0, let u = 1 instead.
    • If t mod p = 0, let t = 1 instead.
    • If (u³ + t² + 7) mod p = 0, let t = 2t (mod p) instead.
  • Let X = (u³ + 7 - t²)/(2t) (mod p).
  • Let Y = (X + t)/(cu) (mod p).
  • For every x in {u + 4Y², (-X/Y - u)/2, (X/Y - u)/2} (all mod p; the order matters):
    • If lift_x(x) succeeds, return x. There is at least one such x.

To find encodings of a given X coordinate x, we first need the inverse of XSwiftEC. The function XSwiftECInv(x, u, case) either returns t such that XSwiftEC(u, t) = x, or None. The case variable is an integer in range 0..7, which selects which of the up to 8 valid such t values to return:

• XSwiftECInv(x, u, case):
  • If case & 2 = 0:
    • If lift_x(-x - u) succeeds, return None.
    • Let v = x.
    • Let s = -(u³ + 7)/(u² + uv + v²) (mod p).
  • Else (case & 2 = 2):
    • Let s = x - u (mod p).
    • If s = 0, return None.
    • Let r be the square root of -s(4(u³ + 7) + 3u²s) (mod p). Return None if it does not exist.
    • If case & 1 = 1 and r = 0, return None.
    • Let v = (r/s - u)/2.
  • Let w be the square root of s (mod p). Return None if it does not exist.
  • If case & 5 = 0, return -w(u(1 - c)/2 + v).
  • If case & 5 = 1, return w(u(1 + c)/2 + v).
  • If case & 5 = 4, return w(u(1 - c)/2 + v).
  • If case & 5 = 5, return -w(u(1 + c)/2 + v).

The overall XElligatorSwift algorithm, matching the name used in the paper, then uses this inverse to randomly sample encodings of x:

• XElligatorSwift(x):
  • Loop:
    • Let u be a random non-zero integer in range 1..p-1 inclusive.
    • Let case be a random integer in range 0..7 inclusive.
    • Compute t = XSwiftECInv(x, u, case).
    • If t is not None, return (u, t). Otherwise, restart loop.

This is used to define the ellswift_create algorithm used in the previous section; it generates a random private key, along with a uniformly sampled 64-byte ElligatorSwift-encoded public key corresponding to it:

• ellswift_create():
  • Generate a random private key priv in range 1..p-1.
  • Let P = priv⋅G, the corresponding public key point to priv.
  • Let (u, t) = XElligatorSwift(x(P)), an encoding of x(P).
  • ellswift_pub = bytes(u) || bytes(t), its encoding as 64 bytes.
  • Return (priv, ellswift_pub).

Finally the ellswift_ecdh_xonly algorithm is:

• ellswift_ecdh_xonly(ellswift_theirs, priv):
  • Let u = int(ellswift_theirs[:32]) mod p.
  • Let t = int(ellswift_theirs[32:]) mod p.
  • Return bytes(x(priv⋅lift_x(XSwiftEC(u, t)))).

Keys and session ID derivation

The authenticated encryption construction proposed here requires two 32-byte keys per communication direction. These (in addition to a session ID) are computed using HKDF as specified in RFC 5869 with SHA256 as the hash function:

def initialize_v2_transport(peer, ecdh_secret, initiating):
    # Include NETWORK_MAGIC to ensure a connection between nodes on different networks will immediately fail
    prk = HKDF_Extract(Hash=sha256, salt=b'bitcoin_v2_shared_secret' + NETWORK_MAGIC, ikm=ecdh_secret)

    peer.session_id = HKDF_Expand(Hash=sha256, PRK=prk, info=b'session_id', L=32)

    # Initialize the packet encryption ciphers.
    initiator_L = HKDF_Expand(Hash=sha256, PRK=prk, info=b'initiator_L', L=32)
    initiator_P = HKDF_Expand(Hash=sha256, PRK=prk, info=b'initiator_P', L=32)
    responder_L = HKDF_Expand(Hash=sha256, PRK=prk, info=b'responder_L', L=32)
    responder_P = HKDF_Expand(Hash=sha256, PRK=prk, info=b'responder_P', L=32)
    garbage_terminators = HKDF_Expand(Hash=sha256, PRK=prk, info=b'garbage_terminators', L=32)
    initiator_garbage_terminator = garbage_terminators[:16]
    responder_garbage_terminator = garbage_terminators[16:]

    if initiating:
        peer.send_L = FSChaCha20(initiator_L)
        peer.send_P = FSChaCha20Poly1305(initiator_P)
        peer.send_garbage_terminator = initiator_garbage_terminator
        peer.recv_L = FSChaCha20(responder_L)
        peer.recv_P = FSChaCha20Poly1305(responder_P)
        peer.recv_garbage_terminator = responder_garbage_terminator
    else:
        peer.send_L = FSChaCha20(responder_L)
        peer.send_P = FSChaCha20Poly1305(responder_P)
        peer.send_garbage_terminator = responder_garbage_terminator
        peer.recv_L = FSChaCha20(initiator_L)
        peer.recv_P = FSChaCha20Poly1305(initiator_P)
        peer.recv_garbage_terminator = initiator_garbage_terminator

    # To achieve forward secrecy we must wipe the key material used to initialize the ciphers:
    memory_cleanse(ecdh_secret, prk, initiator_L, initiator_P, responder_L, responder_K)

The session ID uniquely identifies the encrypted channel. v2 clients supporting this proposal may present the entire session ID (encoded as a hex string) to the node operator to allow for manual, out of band comparison with the peer node operator. Future transport versions may introduce optional authentication methods that compare the session ID as seen by the two endpoints in order to bind the encrypted channel to the authentication.

Overall handshake pseudocode

To establish a v2 encrypted connection, the initiator generates an ephemeral secp256k1 keypair and sends an unencrypted ElligatorSwift encoding of the public key to the responding peer followed by unencrypted pseudorandom bytes initiator_garbage of length garbage_len < 4096.

def initiate_v2_handshake(peer, garbage_len):
    peer.privkey_ours, peer.ellswift_ours = ellswift_create(initiating=True)
    peer.sent_garbage = rand_bytes(garbage_len)
    send(peer, peer.ellswift_ours + peer.sent_garbage)

The responder generates an ephemeral keypair for itself and derives the shared ECDH secret (using the first 64 received bytes) which enables it to instantiate the encrypted transport. It then sends 64 bytes of the unencrypted ElligatorSwift encoding of its own public key and its own responder_garbage also of length garbage_len < 4096. If the first 12 bytes received match the v1 prefix, the v1 protocol is used instead.

TRANSPORT_VERSION = b''
NETWORK_MAGIC = b'\xf9\xbe\xb4\xd9' # Mainnet network magic; differs on other networks.
V1_PREFIX = NETWORK_MAGIC + b'version\x00'

def respond_v2_handshake(peer, garbage_len):
    peer.received_prefix = b""
    while len(peer.received_prefix) < 12:
        peer.received_prefix += receive(peer, 1)
        if peer.received_prefix[-1] != V1_PREFIX[len(peer.received_prefix) - 1]:
            peer.privkey_ours, peer.ellswift_ours = ellswift_create(initiating=False)
            peer.sent_garbage = rand_bytes(garbage_len)
            send(peer, ellswift_Y + peer.sent_garbage)
            return
    use_v1_protocol()

Upon receiving the encoded responder public key, the initiator derives the shared ECDH secret and instantiates the encrypted transport. It then sends the derived 16-byte initiator_garbage_terminator followed by an authenticated, encrypted packet with empty contents to authenticate the garbage, and its own version packet. It then receives the responder's garbage and garbage authentication packet (delimited by the garbage terminator), and checks if the garbage is authenticated correctly. The responder performs very similar steps but includes the earlier received prefix bytes in the public key. As mentioned before, the encrypted packets for the version negotiation phase can be piggybacked with the garbage authentication packet to minimize roundtrips.

def complete_handshake(peer, initiating):
    received_prefix = b'' if initiating else peer.received_prefix
    ellswift_theirs = receive(peer, 64 - len(received_prefix))
    ecdh_secret = v2_ecdh(peer.privkey_ours, ellswift_theirs, peer.ellswift_ours,
                          initiating=initiating)
    initialize_v2_transport(peer, ecdh_secret, initiating=True)
    # Send garbage terminator + garbage authentication packet + version packet.
    send(peer, peer.send_garbage_terminator +
               v2_enc_packet(peer, b'', aad=peer.sent_garbage) +
               v2_enc_packet(peer, TRANSPORT_VERSION))
    # Skip garbage, until encountering garbage terminator.
    received_garbage = recv(peer, 16)
    for i in range(4096):
        if received_garbage[-16:] == peer.recv_garbage_terminator:
            # Receive, decode, and ignore garbage authentication packet (decoy or not)
            v2_receive_packet(peer, aad=received_garbage, skip_decoy=False)
            # Receive, decode, and ignore version packet, skipping decoys
            v2_receive_packet(peer)
            return
        else:
            received_garbage += recv(peer, 1)
    # Garbage terminator was not seen after 4 KiB of garbage.
    disconnect(peer)

Packet encryption

Lastly, we specify the packet encryption cipher in detail.

Existing cryptographic primitives

Packet encryption is built on two existing primitives:

• ChaCha20Poly1305 is specified as AEAD_CHACHA20_POLY1305 in RFC 8439 section 2.8. It is an authenticated encryption protocol with associated data (AEAD), taking a 256-bit key, 96-bit nonce, and an arbitrary-length byte array of associated authenticated data (AAD). Due to the built-in authentication tag, ciphertexts are 16 bytes longer than the corresponding plaintext. In what follows:
  • aead_chacha20_poly1305_encrypt(key, nonce, aad, plaintext) refers to a function that takes as input a 32-byte array key, a 12-byte array nonce, an arbitrary-length byte array aad, and an arbitrary-length byte array plaintext, and returns a byte array ciphertext, 16 bytes longer than the plaintext.
  • aead_chacha20_poly1305_decrypt(key, nonce, aad, ciphertext) refers to a function that takes as input a 32-byte array key, a 12-byte array nonce, an arbitrary-length byte array aad, and an arbitrary-length byte array ciphertext, and returns either a byte array plaintext (16 bytes shorter than the ciphertext), or None in case the ciphertext was not a valid ChaCha20Poly1305 encryption of any plaintext with the specified key, nonce, and aad.
• The ChaCha20 Block Function is specified in RFC 8439 section 2.3. It is a pseudorandom function (PRF) taking a 256-bit key, 96-bit nonce, and 32-bit counter, and outputs 64 pseudorandom bytes. It is the underlying building block on which ChaCha20 (and ultimately, ChaCha20Poly1305) is built. In what follows:
  • chacha20_block(key, nonce, count) refers to a function that takes as input a 32-byte array key, a 12-byte array nonce, and an integer count in range 0..2³²-1, and returns a byte array of length 64.

These will be used for plaintext encryption and length encryption, respectively.

Rekeying wrappers: FSChaCha20Poly1305 and FSChaCha20

To provide re-keying every 224 packets, we specify two wrappers.

The first is FSChaCha20Poly1305, which represents a ChaCha20Poly1305 AEAD, which automatically changes the nonce after every message, and rekeys every 224 messages by encrypting 32 zero bytes, and using the first 32 bytes of the result. Each message will be used for one packet. Note that in our protocol, any FSChaCha20Poly1305 instance is always either exclusively encryption or exclusively decryption, as separate instances are used for each direction of the protocol. The nonce used for a message is composed of the 32-bit little-endian encoding of the number of messages with the current key, followed by the 64-bit little-endian encoding of the number of rekeyings performed. For rekeying, the first 32-bit integer is set to 0xffffffff.

REKEY_INTERVAL = 224

class FSChaCha20Poly1305:
    """Rekeying wrapper AEAD around ChaCha20Poly1305."""

    def __init__(self, initial_key):
        self.key = initial_key
        self.packet_counter = 0

    def crypt(self, aad, text, is_decrypt):
        nonce = ((self.packet_counter % REKEY_INTERVAL).to_bytes(4, 'little') +
                 (self.packet_counter // REKEY_INTERVAL).to_bytes(8, 'little'))
        if is_decrypt:
            ret = aead_chacha20_poly1305_decrypt(self.key, nonce, aad, text)
        else:
            ret = aead_chacha20_poly1305_encrypt(self.key, nonce, aad, text)
        if (self.packet_counter + 1) % REKEY_INTERVAL == 0:
            rekey_nonce = b"\xFF\xFF\xFF\xFF" + nonce[4:]
            self.key = aead_chacha20_poly1305_encrypt(self.key, rekey_nonce, b"", b"\x00" * 32)[:32]
        self.packet_counter += 1
        return ret

    def decrypt(self, aad, ciphertext):
        return self.crypt(aad, ciphertext, True)

    def encrypt(self, aad, plaintext):
        return self.crypt(aad, plaintext, False)

The second is FSChaCha20, a (single) stream cipher which is used for the lengths of all packets. Encryption and decryption are identical here, so a single function crypt is exposed. It XORs the input with bytes generated using the ChaCha20 block function, rekeying every 224 chunks using the next 32 bytes of the block function output as new key. A chunk refers here to a single invocation of crypt. As explained before, the same cipher is used for 224 consecutive chunks, to avoid wasting cipher output. The nonce used for these batches of 224 chunks is composed of 4 zero bytes followed by the 64-bit little-endian encoding of the number of rekeyings performed. The block counter is reset to 0 after every rekeying.

class FSChaCha20:
    """Rekeying wrapper stream cipher around ChaCha20."""

    def __init__(self, initial_key):
        self.key = initial_key
        self.block_counter = 0
        self.chunk_counter = 0
        self.keystream = b''

    def get_keystream_bytes(self, nbytes):
        while len(self.keystream) < nbytes:
            nonce = ((0).to_bytes(4, 'little') +
                     (self.chunk_counter // REKEY_INTERVAL).to_bytes(8, 'little'))
            self.keystream += chacha20_block(self.key, nonce, self.block_counter)
            self.block_counter += 1
        ret = self.keystream[:nbytes]
        self.keystream = self.keystream[nbytes:]
        return ret

    def crypt(self, chunk):
        ks = self.get_keystream_bytes(len(chunk))
        ret = bytes([ks[i] ^ chunk[i] for i in range(len(chunk))])
        if ((self.chunk_counter + 1) % REKEY_INTERVAL) == 0:
            self.key = self.get_keystream_bytes(32)
            self.block_counter = 0
        self.chunk_counter += 1
        return ret

Overall packet encryption and decryption pseudocode

Encryption and decryption of packets then follow by composing the ciphers from the previous section as building blocks.

LENGTH_FIELD_LEN = 3
HEADER_LEN = 1
IGNORE_BIT_POS = 7

def v2_enc_packet(peer, contents, aad=b'', ignore=False):
    assert len(contents) <= 2**24 - 1
    header = (ignore << IGNORE_BIT_POS).to_bytes(HEADER_LEN, 'little')
    plaintext = header + contents
    aead_ciphertext = peer.send_P.encrypt(aad, plaintext)
    enc_contents_len = peer.send_L.encrypt(len(contents).to_bytes(LENGTH_FIELD_LEN, 'little'))
    return enc_contents_len + aead_ciphertext

CHACHA20POLY1305_EXPANSION = 16

def v2_receive_packet(peer, aad=b'', skip_decoy=True):
    while True:
        enc_contents_len = receive(peer, LENGTH_FIELD_LEN)
        contents_len = int.from_bytes(peer.recv_L.crypt(enc_contents_len), 'little')
        aead_ciphertext = receive(peer, HEADER_LEN + contents_len + CHACHA20POLY1305_EXPANSION)
        plaintext = peer.recv_P.decrypt(aead_ciphertext)
        if plaintext is None:
            disconnect(peer)
            break
        header = plaintext[:HEADER_LEN]
        if not (skip_decoy and header[0] & (1 << IGNORE_BIT_POS)):
            return plaintext[HEADER_LEN:]

Performance

Each v1 P2P message uses a double-SHA256 checksum truncated to 4 bytes. Roughly the same amount of computation power is required for encrypting and authenticating a v2 P2P message as proposed.

Application layer specification

v2 Bitcoin P2P message structure

v2 Bitcoin P2P transport layer packets use the encrypted message structure shown above. An unencrypted application layer contents is composed of:

Field	Size in bytes	Comments
message_type	1 or 13	either a one byte ID in range 1..255 or b'\x00' followed by a 12-byte ASCII message type (as in the v1 P2P protocol)
message_payload	message_length	message payload

If the first byte of message_type is b'\x00', the following 12 bytes are interpreted as an ASCII message type (as in the v1 P2P protocol), trailing padded with b'\x00' as necessary. If the first byte of message_type is in the range 1..255, it is interpreted as a message type ID. This structure results in smaller messages than the v1 protocol, as most messages sent/received will have a message type ID. We recommend reserving 1-byte type IDs for message types that are sent more than once per direction per connection.

The following table lists currently defined message type IDs:

	0	1	2	3
+0	(12 bytes follow)	ADDR	BLOCK	BLOCKTXN
+4	CMPCTBLOCK	FEEFILTER	FILTERADD	FILTERCLEAR
+8	FILTERLOAD	GETBLOCKS	GETBLOCKTXN	GETDATA
+12	GETHEADERS	HEADERS	INV	MEMPOOL
+16	MERKLEBLOCK	NOTFOUND	PING	PONG
+20	SENDCMPCT	TX	GETCFILTERS	CFILTER
+24	GETCFHEADERS	CFHEADERS	GETCFCHECKPT	CFCHECKPT
+28	ADDRV2	REQRECON	SKETCH	REQSKETCHEXT
+32	RECONCILDIFF
≥33	colspan="4" | (undefined)

Additional message types may be added separately after BIP finalization.

Signaling specification

Signaling v2 support

Peers supporting the v2 transport protocol signal support by advertising the NODE_P2P_V2 = (1 << 11) service flag in addr relay. If met with immediate disconnection when establishing a v2 connection, clients implementing this proposal are encouraged to retry connecting using the v1 protocol.

Test Vectors

For development and testing purposes, we provide a collection of test vectors in CSV format, and a naive, highly inefficient, reference implementation of the relevant algorithms. This code is for demonstration purposes only:

• XElligatorSwift decoding vectors provide examples of ElligatorSwift-encoded public keys, and the X coordinate they map to.
• XSwiftECInv vectors provide examples of (u, x) pairs, and the various t values that xswiftec_inv maps them to.
• Packet encoding vectors illustrate the lifecycle of the authenticated encryption scheme proposed in this document.

Acknowledgements

Thanks to everyone (last name order) that helped invent and develop the ideas in this proposal:

• Matt Corallo
• Lloyd Fournier
• Gregory Maxwell
• Anthony Towns