990W (measure on 12V port of the device)
1100W (on the wall, with assumption of 90% power conversion ratio)
Power per hash:
270J/THash (device only)
295J/THash (on the wall, with assumption of 90% power conversion
Support automatically optimize frequency, no need to overclock manually.
PSU ouput pin:
4x6PIN PCIe power connector. *All must be connected.*
Minimum 1100W output, recommend to use high quality PSU for server
with more than 1200W output and high quality power cable.
Input voltage no lower than 11.7V and no higher than 12.2V (numbers
take from the controller)
Lower voltage leads to lower hashrate and higher voltage leads to
possible device burning down.
NOTICE: Poor quality cable may result in low voltage.
Current: between 1.6A and 2.8A.
Minimum RPM: 3800.
*NOTICE* If the fan is broken or the fan's RPM cannot be measure,
the device will not start.
Raspberry Pi (version B or B+)
Raspberrt Pi 2 is not supported yet.
Each RPi can control approximate 60 devices.
Each AUC can connect up to 6 devices.
Power on: White
Idle: Yellow blinking
Error(Software, Power, Temperature): Red blinking
Manually turn on LED: While blinking
- First version of Avalon6 firmware
- Version 601509-a2613610
- First MM firmware for Avalon6.0 S
- Support 2 miners
- Detect asic counts when start
- Support target filter
- NOTICE: Only for testing
- Version 601509-9dd0f8a0
- Fix upgrade failed
CGMiner Under Ubuntu 14.04
# Daily building: http://build.canaan-creative.com:8080/~mikeqin/avalon6/
#Inside your home directory, download Cgminer
git clone https://github.com/Canaan-Creative/cgminer
git checkout origin/avalon4 -b avalon4
make -j 4
sudo ./cgminer --avalon4-freq 200 --avalon4-voltage 7125 -o http://stratum.pool:3333 -u work -p pass
sudo ./cgminer --avalon4-freq 200 --avalon4-voltage 7125 -o http://stratum.pool:3333 -u work -p pass --api-allow W:192.168.2,W:192.168.2.1 --api-listen $@ 2>./log
* Daily building: http://build.canaan-creative.com:8080/~mikeqin/mm60/
* Avalon6 TB2 ===
$ make -C firmware PLATFORM=MM60_TB2
* Avalon6.0 S ===
$ make -C firmware
- Support Raspberry Pi 2B
- Update with the master branch
- Support Avalon6 in LuCI (Advanced version)
- Keep more coding on LuCI (Avalon theme)
- Add auto speed option
- Merge the Avalon6 code to CK's master
- New board Avalon 6.2 support
- Temperature support
- LPC11U14 program/update
- Change stratum code to libstratum.a
- Support diff = 1
- MM Firmware upgrade failed