Avalon4
Pictures
A3222
- Datasheet download here
Package: QFN56-8X8, 0.5mm pitch Core voltage: 0.65 ~ 0.8V Chip frequency: 400MHz Hashrate: 25-30G (Normal，0.75V) Power usage: 0.45-0.55W/G on ASIC side VDDIO: 1.5 ~ 2.5V
SPI Example
a real data:
1st:
work n chip1
{576'hc16801619d8d4242e06e5fab25a54bbe222e8b877848c34beea79cd6528caf7e33cde02a983dab158119ce2a1c9fc4eddac8ce296d0fd9da6e18f645087e051a2d547050e8dc86b1, 64'ha, 32'h1, 32'h1, 32'h1}
work n chip0
{576'h1bed3ba0a2cb45c1d8f8ef6712146495c44192c07145fd6d974bf4bb8f41371d65c90d1e9cb18a17fa77fe7d13cdfd7b0063910762a5f25c06b168ae087e051a895170504ac1d001, 64'h5, 32'h1, 32'h1, 32'h1}
2nd:
work n+1 chip1
{576'h0, 64'hb, 32'h1, 32'h1, 32'h1}
work n+1 chip0
{576'h0, 64'h6, 32'h1, 32'h1, 32'h1}
3rd:
work n+2 chip1
{576'h0, 64'hc, 32'h1, 32'h1, 32'h1}
work n+2 chip0
{576'h0, 64'h7, 32'h1, 32'h1, 32'h1}
then get nonce 32'h1beebba0 for chip0, 32'hc1698161 for chip1;
Avalon4
Each module include 40 A3222 ASICs, the mdoule should be working at 1TH/S and using 700W power.
JTAG Port
PMU
HU
Power & GND
LED
| LED | OFF | ON | BLINKING | MEMO |
|---|---|---|---|---|
| ERR | - | POST failed or One module dead | Manual | |
| WARN | Hashing | Idle mode | Fan is 0 or Overheat | |
| TXD/RXD | No data | - | Data transferring | |
| N1/N2 | No nonce | - | Found one nonce | |
| PG1/PG2 | - | Power good | Some of small PMU failed |
Avalon4 CGMiner Under Ubuntu 14.04
Download
Inside your home directory, download Cgminer git clone https://github.com/Canaan-Creative/cgminer
Compile
cd cgminer git checkout origin/avalon4 -b avalon4 ./autogen.sh --enable-avalon4 make -j 4
Run
sudo ./cgminer --avalon4-fan 60 --avalon4-freq 200 --avalon4-voltage 7125 --lowmem -o http://stratum.pool:3333 -u work -p pass or sudo ./cgminer --avalon4-fan 60 --avalon4-freq 200 --avalon4-voltage 7125 --lowmem -o http://stratum.pool:3333 -u work -p pass --api-allow W:192.168.2,W:192.168.2.1 --api-listen $@ 2>./log
Tweak
- Led
Format: ascset|ASCN,led,modularid eg: cgminer-api "ascset|0,led,1"
- Fan
Format: ascset|ASCN,fan,fanmin[-fanmax] eg: cgminer-api "ascset|0,fan,10" or cgminer-api "ascset|0,fan,10-100"
Technical details
- The auc take 1~2ms betwwen write and read. even the polling delay is 0 (4800 means 1ms)
- The cgminer each polling takes ~20ms. even the polling delay is 0ms
AUC
Avalon USB2IIC converter, USD VID:PID 29f1:33f2
LED
- PWR: Power indicator
- R: AUC response error
- G: IIC Xfer
- B: AUC init
AUC Firmware
20141122
- AUC version: AUC-20141122
- Reset asic when usb config changed(true->false)
20141105
- AUC version: AUC-20141105
- Code cleanup
- Improve for firmware burning
20141103
- AUC version: AUC-20141103
- Add watchdog
- Code cleanup
20141027
- AUC version: AUC-20141027
- Change Manufacturer to CANAAN
20141019
- AUC version: AUC-20141019
- First version of AUC firmware
- Source URL: https://github.com/Canaan-Creative/Avalon-USB-converter
RPi/703N Firmware
Daily Building
20141203
- Add module elapsed time
- Modify the decrase offset from 250 to 4*125,increase step to 125
20141127
- Add TL-WR703N support
- Add automatic voltage support
- Add GHS5m and DH%5m for each module
- Fix AUC ADC value
20141124
- Add MM41 support
- Add mm count value in API status
- Fix the matching_work error
- Update dh calculation for luci
- Change theme name to avalon
20141118
- Adjust module voltage by ascset
- A new theme was added to luci,and use it as default
20141112
- Support RPi B/B+ version
- Change default IIC speed from 1M to 400K
- Add Avalon4 MM rolling ntime offset
- Update fan adjustment
- Add a new luci theme for Raspberry Pi
- Display DNA on cgminer status page
20141029
- First version of Avalon4 firmware
NEXT-TESTING
- NOTICE: Only for testing
MM Firmware
20141122
- Version 401411-cad52ec0
- Fix the type on DEFAULT MDOULES
- Fix the led status when warning
- Add MM4.1 defines
- Add new power module in test/
20141111
- Version: 401411-5965e0f0
- Add ntime offset configure from outside
- Reset globe values when idle
- Update ChangeLog, README and MM_VERSION
20141109
- Version: 401410-c6ba5180
- Big Code cleanup, Update MM protocol.
- Update timeout value to 90% the theory value.
- Fix the hashrate couning.
- Fix watchdog issue. enable watchdog.
- Remove g_module_id check since we use I2C
- Move adjust fan in polling package.
- Update MM idle default fan speed to 10%
20141104
- Version: 401410-223a1c50
- Update idle timeout from 5s to 3s
- Display ID on controller LEDs for debug
- Fix the automatic module detect
- Disable watch dog
- IDLE check when both (new stratum) and (module id) was configured
20141101
- Fix the front led display
- Cutoff power after testing
20141030
- First version of Avalon4 firmware