Mining hardware comparison
Below are some statistics about the mining performance of various hardware used in a mining rig.
The table shows (mostly) stock clock numbers. 10-20% performance improvement can be achieved with GPU overclocking tools.
Notes:
- Mhash/s = millions hashes per second (raw speed performance ; may not be very energy efficient with some models)
- Mhash/J = millions hashes per joule (energy efficiency ; 1 joule of energy is spent for 1 watt in 1 second)
- W = watt (maximum power consumption, i.e. energy per unit of time : 1 W = 1 J/s)
- Clock (in MHz) refers to the Shader clock only with nVidia cards (not Core or Memory). With AMD card the shader clock is not separate, but is part of the GPU clock.
- SP = Stream processors (Shader Units)
Graphics cards
Popular Mining Cards
These tables have been included to make choosing a card easier. The cards selected are generally readily available online. Once you have purchased a card or cards, use the tables below to compare different configurations and setups.
Single Card Setups
Model | Price [1] | Availability | Avg. Mhash/s | Mhash/J | Mhash/$ |
---|---|---|---|---|---|
5770 | $136 | Moderate | 212.83 | 1.45 | 1.56 |
5830 | $130 | Moderate | 286.45 | 1.4 | 2.20 |
5850 | $161 | Limited | 325.49 | 1.73 | 2.02 |
5870 | $350 | Limited | 393.46 | 1.9 | 1.12 |
5970 | $730 | V. Limited | 655.83 | 2.01 | 0.90 |
6750 | $116 | Easy | 167.59 | 1.44 | |
6770 | $137 | Easy | 196.67 | 1.44 | |
6850 | $160 | Easy | 213.7 | 1.35 | 1.34 |
6870 | $190 | Easy | 278.31 | 1.73 | 1.46 |
6950 | $250 | Easy | 360.62 | 1.8 | 1.44 |
6970 | $350 | Easy | 389.55 | 1.72 | 1.11 |
6990 | $770 | Limited | 758.82 | 1.91 | 0.99 |
Multi-Card Setups
Model | Price [1] | Availability | Avg. Mhash/s | Mhash/J | Mhash/$ |
---|---|---|---|---|---|
5830x2 | $360 | Moderate | 525 | 1.46 | |
5850x4 | $644 | Limited | 1360 | 1.94 | 2.11 |
5870x2 | $700 | Limited | 787.5 | 0.84 | 1.13 |
6770x2 | $274 | Easy | 464 | 1.69 | |
6950x4 | $1,000 | Easy | 1316 | 1.51 | 1.32 |
6970x2 | $700 | Easy | 769 | 1.6 | 1.10 |
6990x2 | $1,540 | Limited | 1568 | 1.7 | 1.02 |
6990x3 | $2,310 | Limited | 2094 | 1.8 | 0.91 |
- ↑ 1.0 1.1 Price from http://amazon.com/ on 2011-07-02
AMD (ATI)
To get the maximum performance use the 2.1 release of the ATI Stream SDK. 2.2 wastes CPU time, and 2.3/2.4 drop mining performance by 5-10% unless using the Phoenix phatk kernel. Note: This statement is not entirely accurate. YMMV.
Model | Mhash/s | Mhash/J | Mhash / $[1] | Watts | Clock | SP | SDK | Slot | Miner | Notes | |
---|---|---|---|---|---|---|---|---|---|---|---|
3XXX | OpenCL Not Supported | ||||||||||
42XX | OpenCL Not Supported (integrated/mobile GPU) | ||||||||||
4350 | 6.93 | 0.346 | 0.16 | 20 | 575 | 80 | - | PCI-E 2.0 x16 | poclbm | -w 32, don't use vectors | |
4350 | 8.14 | - | 0.19 | - | 730 | 80 | 2.4 | PCI-E 2.0 x16 | Diablo/Windows7 | -w 32. Model: Asus EAH4350 Silent. Memory at 400MHz. Runs at 60°C with ambient at 25°C. | |
4550 | 7.23 | 0.289 | 0.13 | 25 | 600 | 80 | - | PCI-E 2.0 x16 | poclbm | -w 32, don't use vectors | |
4570M | 8.02 | 0.297 | ? | 27 | 680 | 80 | - | PCI-E 2.0 x16 | Diablo/Windows7 | -w 64, SDK 2.4, Cat 11.4. Model: Sony Vaio NW | |
4570M | 9.6 | 0.300 | ? | 32 | 825(OC) | 80 | - | PCI-E 2.0 x16 | Diablo/Windows7 | -w 64, SDK 2.4, Cat 11.4. Model: Sony Vaio NW. OC core 680->825. U/C memory 800->500. | |
4650 | 31.33 | 0.653 | 0.44 | 48 | 650 | 320 | - | PCI-E 2.0 x16 | poclbm | -w 32, don't use vectors | |
4670 | 36.14 | 0.613 | 0.34 | 59 | 750 | 320 | - | PCI-E 2.0 x16 | poclbm | -w 32, don't use vectors | |
4670 | 40.11 | 0.679 | 0.38 | 59 | 800 | 320 | - | AGP x8 | poclbm/Ubuntu 10.10 w/ H == 0 mod | -w 32 -f 0, don't use vectors source | |
4670 | 50 | - | 0.47 | 60 | 800 | 320 | - | PCI-E 2.0 x16 | guiminer | 2 miners set up i7 920 (130W), CPU: Ufasoft, GPU: OpenCL; the CPU is getting about 40 Mhash/s while the GPU goes from 10-20 Mhash/s | |
4730 | 72.29 | 0.657 | ? | 110 | 750 | 640 | - | PCI-E 2.0 x16 | - | ||
4770 | 72.29 | 0.904 | 0.72 | 80 | 750 | 640 | - | PCI-E 2.0 x16 | - | ||
4830 | 55.42 | 0.583 | 95 | 575 | 640 | - | PCI-E 2.0 x16 | - | |||
4830 | 66.12 | 0.503 | 105 | 700 | 1005 | - | PCI-E 2.0 x16 | - | |||
4830 | 61.7 | - | - | 700 | - | 2.4 | PCI-E 2.0 x16 | poclbm-mod | Fedora 14 | ||
4830 | 64.9 | - | - | 700 | - | 2.4 | PCI-E 2.0 x16 | poclbm-mod | Fedora 14 | ||
4850 | 75.30 | 0.685 | 110 | 625 | 800 | - | PCI-E 2.0 x16 | - | |||
4850 | 84.3 | 0.766 | 110 | 725 | 300 | - | PCI-E 2.0 x16 | - | -w64 fan at 70% temp 73C, stock voltage -gui miner | ||
4850 | 90.1 | 0.819 | 110 | 800 | 500 | - | PCI-E 2.0 x16 | guiminer | -f 30; Tried phoenix and phatk, got same max | ||
4850 | 101 | 0.918 | 110 | 817 | 500 | 2.1 | PCI-E 2.0 x16 | guiminer | -f 0, core 817mhz(default 625)@1.123v , mem downclock to 500mhz (default 993) source | ||
4850x2 | 150.60 | 0.602 | 250 | 625 | 1600 | - | PCI-E 2.0 x16 | - | |||
4860 | 67.47 | 0.519 | 130 | 700 | 640 | - | PCI-E 2.0 x16 | - | |||
4870 | 92.84 | 0.6189333(?) | 150(?) | 830(OC) | 800 | 2.4 | PCI-E 2.0 x16 | Phoenix 1.48 | -k poclbm AGGRESSION=5 (Windows 7 64-Bit, GPU OC 750->830MHz, VRAM UC 900->450MHz, BIOS modded) | ||
4870 | 104.6 | 0.872 | 120 | 830(OC) | 800 | 2.1 | PCI-E 2.0 x16 | poclbm | -w 256 -f 1, Windows 7 64-Bit, GPU Core OC to 830 MHz, GPU Memory UC to 190 MHz (saves 30 watts at outlet) | ||
4870 | 90.36 | 0.602 | 150 | 750 | 800 | 2.1 | PCI-E 2.0 x16 | clmine | |||
4870 | 78 | 0.520 | 150 | - | - | - | PCI-E 2.0 x16 | m0mchil's OpenCL/Vista 64bit | source | ||
4870x2 | 180.72 | 0.632 | 286 | 750 | 1600 | - | PCI-E 2.0 x16 | - | |||
4870x2 | 180.6 | 0.632 | 286 | 800 | 1600 | - | PCI-E 2.0 x16 | - | |||
4890 | 97.1 | 0.511 | 190 | 870(OC) | 1050 | 2.4 | PCI-E 2.0 x16 | GUIMiner v2011-01-21 Solo settings | Sapphire fab. No flags options helped. Close all browsers and do full restart of GUIMiner and then Bitcoin via GUIMiner server starter or the browsers GPU accl. will limit to 56~ ish Mhash/s - I can now start browser without slowdowns | ||
4890 | 102.41 | 0.539 | 190 | 850 | 800 | - | PCI-E 2.0 x16 | - | |||
4890 | 108.3 | 0.57 | 190 | 975 | 800 | - | PCI-E 2.0 x16 | - | |||
4890 | 121.5 | - | 190 | 1025 (OC) | 800 | 2.4 | PCI-E 2.0 x16 | poclbm | no flags, Vcore 1.4 | ||
5450 | 11.99 | 0.631 | 19 | 650 | 80 | - | PCI-E 2.1 x16 | - | |||
5450 | 13.74 | - | - | 700 | - | - | PCI-E 2.1 x16 | poclbm/Linuxcoin v0.2 | -v -w128 tried several options, seems to work best. | ||
5450 | 14.12 | - | - | 700 | - | - | PCI-E 2.1 x16 | Phoenix/Linuxcoin v0.2 | Flags: "DEVICE=0 VECTORS AGGRESSION=4 -v FASTLOOP BFI_INT WORKSIZE=64" Kernel: "phatk" | ||
5450 | 15.36 | - | - | 700 | - | - | PCI-E 2.1 x16 | Phoenix | Flags: "DEVICE=0 VECTORS AGRESSION=8 FASTLOOP BFI_ING WORKSIZE=128" Kernel: "phatk" - MagicSata | ||
5550 | 40.59 | 1.041 | 39 | 550 | 320 | - | PCI-E 2.1 x16 | - | |||
5550 | 62.10 | - | - | - | 700 | - | - | PCI-E 2.1 x16 | Phoenix | 700MHz core 800MHz ram, phatk mod, Flags: "-k phatk worksize=128 vectors aggression=4 bfi_int" | |
5570 | 59.96 | 1.538 | 39 | 650 | 400 | - | PCI-E 2.1 x16 | - | |||
5570 | 64 | 1.641 | 39 | 650 | - | - | PCI-E 2.1 x16 | m0mchil's OpenCL/WinXP | source | ||
5570 | 62 | 1.59 | 39 | 650 | 400 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.48 OpenCL/Linux x86_64 | -k phatk DEVICE=0 VECTORS AGGRESSION=4 -v FASTLOOP BFI_INT WORKSIZE=64 | ||
5570 | 73 | 1.872 | 39 | 700 | 400 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.48 OpenCL/Linux x86_64 | -k phatk DEVICE=0 VECTORS AGGRESSION=4 -v FASTLOOP BFI_INT WORKSIZE=64 | ||
5570 | 102 | 1.46(+) | 75(-) | 950 | 400 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.48 OpenCL/Windows 7 x86 (no Aero) | -k phatk DEVICE=0 VECTORS AGGRESSION=7 -v FASTLOOP BFI_INT WORKSIZE=256 (Reference Sapphire card, 2 additional 120mm coolers, temperature is 79-82C) | ||
5650 | 48 | 1.37 | 35(?) | - | - | - | PCI-E 2.1 x16 | m0mchil's OpenCL/Win7-64 | source source -- not TDP but load | ||
5650 | 61.2 | 35 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.50 OpenCL/Windows 7 x64 | -k phatk DEVICE=0 VECTORS BFI_INT WORKSIZE=128 AGGRESSION=9 | |||||
5670 | 71.49 | 1.117 | 64 | 775 | 400 | - | PCI-E 2.1 x16 | - | |||
5670 | 72 | 1.64 | 44 | 850 | - | - | PCI-E 2.0 x16 | poclbm-mod (Win7-64) | Sapphire 100287VGAL card is low power | ||
5670 | 85 | - | - | 900 | 400 | - | PCI-E 2.1 x16 | poclbm | -v -f 0 -w 128 | ||
5670 | 91 | - | - | 890 | 400 | - | PCI-E 2.1 x16 | guiminer 2011-06-09 poclbm catalyst 11.2 win7 x86 | -v -f 0 -w 128 | ||
5670 | 103 | - | - | 900/275 | 400 | 2.4 | PCI-E 2.1 x1 | phoenix-1.50 / phatk-mod / Ubuntu 11.04 | VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 WORKSIZE=256 / small fan, under 50 deg C, no voltage tweaks... catfish | ||
5750 | 105 | - | - | - | - | - | - | - | poclbm | Apple iMac 27inch (Mid 2010), Mac OSX 10.7 Lion | |
5750 | 116.24 | 1.352 | 86 | 700 | 720 | - | PCI-E 2.1 x16 | - | |||
5750 | 137 | - | - | 710 | - | - | PCI-E 1.1 x16 | poclbm | -v -f 0 -w 128 using stock memory and GPU clocks | ||
5750 | 146.4 | - | - | 775 | - | - | PCI-E 2.0 x16 | GUIMiner v2011-05-21 | -v -w128, AMD Catalyst overclock (775MHz GPU / 1225 MHz Memory) | ||
5750 | 154.56 | 1.45 | 106 | 830 | 720 | - | PCI-E 2.1 x16 | - | -v -w128 -f20 underclocked memory clocks from 1150MHz to 300MHz | ||
5750 | 170 | - | - | 870 | - | - | PCI-E 1.1 x16 | poclbm | -v -f 0 -w 128 patched BIOS to underclock memory to 300MHz | ||
5750 | 173 | - | - | 875 | - | - | PCI-E 1.1 x16 | phoenix | 875/300 w/MSI Afterburner, BFI_INT VECTORS AGGRESSION=12 FASTLOOP=FALSE -k phatk | ||
5750 | 190 | - | - | 930/290 | - | atistream sdk | PCI-E 1.1 x16 | poclbm | 930gpu / 290mem (O.S. Ubuntu 10.10 x64, overclock gpu & underclock mem) with poclbm options -v -f 0 -w 256 | ||
5750x2 CF | 356 | - | - | 870 | 720x2 | 2.4 | PCI-E 2.0 x16 | cgminer v1.5.1 (Win7 64bit) | 870MHz GPU / -I 8 / 2x GIGABYTE GV-R575SL-1GI cards + GIGABYTE GA-790FXTA-UD5 MB + 1x 80mm, 1x 90mm Noctua coolers | ||
5770 | 156.83 | 1.452 | 108 | 850 | 800 | 2.1 | PCI-E 2.1 x16 | clmine | |||
5770 Hawk | 182 | - | - | 875 | 800 | 2.4 | PCI-E 2.0 x16 | poclbm/GUIMiner/Win7-64 | -v -w 128 (875MHz is stock for 5770 Hawk) | ||
5770 | 180 | 1.406(*) | 128(*) | 950(OC) | 800 | 2.4RC1 | PCI-E 2.1 x16 | poclbm | -v -w 128 -f 30 (*: Overclocked wattage calculated here) | ||
5770 | 185 | - | - | 850 | 1200 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 / phatk | -k phatk VECTORS BFI_INT WORKSIZE=128 FASTLOOP AGGRESSION=7 | ||
5770 | 205.58 | - | - | 935 | 300 | 2.1 | PCI-E 2.1 x16 | poclbm 2011-04-28 | -v -w 256 | ||
5770 | 214.5 | 1.95(-) | 108(+) | 950 | 300 | 2.4 | PCI-E 2.1 x16 | phoenix 1.50/GUIMiner/Win7-64 | mem underclocked 300 mhz, 1.1vcore, 950mhz core, @69°C/57%FAN VECTORS BFI_INT AGGRESSION=12 -k phatk WORKSIZE=256 | ||
5770 | 214.7 | 1.95(-) | 108(+) | 950 | 800 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 / win7x86 | mem underclocked 309 mhz, -k phatk DEVICE=0 VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 | ||
5770 | 216.5 | - | - | 955 | 2.1 | PCI-E 2.0 x16 | Phoenix 1.5 /phatk | Modified phatk kernel and stock voltage for Sapphire (1.125V) VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 -k phatk WORKSIZE=256 | |||
5770 | 218.35 | - | - | 1000 | 1401 | 2.1 | PCI-E 2.0 x16 | DiabloMiner | -w 128 -v 2 (Overclocked to 1Ghz core with 1.2 voltage and Scythe Setsugen 2 cooling system) | ||
5770 | 219.4 | - | - | 960 | 240 | 2.1 | PCI-E 2.0 x16 | Phoenix 1.5 /phatk | Modified phatk kernel and stock voltage for Sapphire (1.125V) VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 -k phatk WORKSIZE=256 | ||
5770 | 223 | 2.23(-) | 100(+) | 1050 | 300 | 2.4 | PCI-E 2.1 x16 | guiminer | -v -w256 source | ||
5770 | 227 | - | - | 1030 | 800 | 2.1 | PCI-E 2.0 x16 | DiabloMiner | -w 256 -v 2 (Overclocked to 1030 core/300 mem with 1.2 voltage and Scythe Setsugen 2 cooling system) | ||
5770 | 236 | - | - | 1033/275 | 800 | 2.4 | PCI-E 2.1 x16 | phoenix-1.50 / phatk-mod / Ubuntu 10.04 | VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 WORKSIZE=256 / big fans, under 75 deg C, no voltage tweaks... catfish | ||
5770 | 233 | 2.23(-) | 100(+) | 1050 | 300 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 | VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 -k phatk WORKSIZE=256 source | ||
5770 | 240.61 | 2.3632(-) | 100(+) | 1080 | 300 | 2.4 | PCI-E 2.1 x1 | phoenix 1.48 | VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 -k phatk WORKSIZE=256 (OC'd and OV'd 1080/300 1.25v) | ||
5770 | 241 | - | - | 100(+) | 1045 | 250 | 2.1 | PCI-E 2.1 x16 | phoenix 1.50 | VECTORS BFI_INT AGGRESSION=13 -k phatk WORKSIZE=256 (OC 1020/300) XFX@1.1 volts. +Kernel function improve 5% | |
5770x2 | 425 | - | - | 225(+) | 960 | 800x2 | 2.1 | PCI-E 2.1 x16 | poclbm (guiminer) Win7x64 | -v -w128 (OC 960/1200) | |
5830 | 244 | 1.36 | 179 | 800 | 1000 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.48 OpenCL/Linux x86_64 | -k phatk DEVICE=1 VECTORS AGGRESSION=6 -v FASTLOOP WORKSIZE=128 BFI_INT | ||
5830 | 267 | - | - | 875 | 1000 | 2.4 | PCI-E 2.1 x1 | Phoenix 1.48 OpenCL/Linux x86_64 | -k phatk DEVICE=1 VECTORS AGGRESSION=6 -v FASTLOOP WORKSIZE=128 BFI_INT | ||
5830 | 245 | 1.28 | 192 | 880 | 900 | 2.4 | PCI-E 2.1 x16 | poclbm (guiminer) | -v -w 256 | ||
5830 | 248 | 1.29 | 192 | 880 | 500 | 2.4 | PCI-E 2.1 x16 | phoenix 1.46 | -k poclbm VECTORS BFI_INT AGGRESSION=11 | ||
5830 | 256 | - | - | 900 | 300 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 | -k poclbm VECTORS BFI_INT AGGRESSION=7 | ||
5830 | 272 | 1.52 | 179 | 875 | - | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 / phatk / LinuxCoin | 275Mhz Memory clock, 1.125 V (from 1.163), VECTORS AGGRESSION=12 BFI_INT | ||
5830 | 275 | 1.5714 | 175 | 900 | 500 | 2.1 | PCI-E 2.1 x16 | poclbm (guiminer) Win7x64 | -v -w64 -f10, XFX stock w/ v2.4 SDK = 230Mh/s, v2.1 SDK = +10Mh/s, overclocking core clock by 100 = +30Mh/s, underclocking memory to 500 (ran cooler), and changing workload to -w64 = +5Mh/s. | ||
5830 | 285 | - | 1.58 | - | 960 | - | 2.4 | PCI-E 2.1 x16 | phoenix 1.47 / poclbm / Win7 64 | VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 | |
5830 | 290 | - | - | 930 | - | 2.2 | PCI-E x16/x4/x1 | GUIMiner / phoenix 1.5 / POCLBM / Win 7 64 | POCLBM VECTORS BFI_INT WORKSIZE=256 AGGRESSION=12 FASTLOOPS=false / Memory 300Mhz, VCore standard | ||
5830 | 290 | - | - | 996 | - | 2.4 | PCI-E 2.1 x16 | phoenix 1.4 / poclbm / Win7 64 | VECTORS AGGRESSION=12 BFI_INT | ||
5830 | 295 | - | - | 980 | 1120 | 2.1 | PCI-E 2.1 x16 | GUIMiner / poclbm / Win XP 32 | Extra flags -v -w 128 | ||
5830 | 297 | - | - | 970 | 1120 | 2.4 | PCI-E 2.0 x16 | guiminer / phoenix 1.48 / phatk / Win7 64 | 300Mhz Memory clock, 44% fan-speed, -k phatk VECTORS BFI_INT AGGRESSION=8 FASTLOOP=false WORKSIZE=256 | ||
5830 | 300 | - | - | 960 | 300 | 2.4 | PCI-E 2.1 x16 | GUIMiner / poclbm / Win 7 64 | Extra flags -v -w 256 (Sapphire Extreme 71 degrees @ 52% fan) | ||
5830 | 300 | - | - | 970 | - | 2.4 | PCI-E 2.0 x16 | phoenix 1.47 / pheonix 1.48 / Win7 64 | (sapphire xtreme) VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 | ||
5830 | 300 | - | - | 970 | 1120 | 2.1 | PCI-E x16 | phoenix 1.48 / phatk / Win7 64 | 300Mhz memory clock BFI_INT AGGRESSION=12 FASTLOOP=false WORKSIZE=256 | ||
5830 | 305 | - | - | 984 | - | 2.4 | PCI-E 2.1 x16 | phoenix 1.4 / phatk / Win7 32 | 400Mhz Memory clock, VECTORS AGGRESSION=12 BFI_INT FASTLOOP=false | ||
5830 | 307 | - | - | 996 | - | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 / phatk / Win7 64 | VECTORS AGGRESSION=12 BFI_INT | ||
5830 | 308 | - | - | 990 | 300 | 2.4 | PCI-E 2.1 x16 | phoenix 1.50 / poclbm / Xubuntu 11.04 x64 | VECTORS AGGRESSION=11 BFI_INT FASTLOOP=false WORKSIZE=256 | ||
5830 | 308 | - | - | 990 | 375 | 2.1 | PCI-E 2.1 x16 | phoenix 1.48 / phatk / Win7 32 | @ stock voltage VECTORS AGGRESSION=11 -v FASTLOOP=false BFI_INT | ||
5830 black | 310 | - | - | 990 | 300 | 2.4 | PCI-E 2.1 x8 | LinuxCoin 0.2b, phoenix/phatk | (XFX Brand) -k phatk VECTORS BFI_INT WORKSIZE=256 AGGRESSION=11 FASTLOOPS=false | ||
5830 | 311 | - | - | 1000 | 300 | 2.4 | PCI-E 2.1 x16 | phoenix 1.50 / phatk / Linux | VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=256 | ||
5830 | 316.35 | - | - | 1015 | 375 | 2.1 | PCI-E 2.1 x16 | phoenix 1.48 / phatk / Win7 32 | @ stock voltage VECTORS AGGRESSION=12 -v FASTLOOP=false BFI_INT | ||
5830 | 319 | - | 1.77 | - | 1030 | - | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 / phatk / Xp 64 | 1.2v 355Mhz Memory, VECTORS AGGRESSION=12 BFI_INT | |
5830 | 321 | - | - | 1000 | 1120 | 2.4 | PCI-E 2.0 x16 | phoenix 1.50 / phatk-mod / Linux | 1000Mhz GPU, 350Mhz RAM, 1.15V, 90% fan, ~60c Temp, VECTORS BFI_INT FASTLOOP=false AGGRESSION=13 WORKSIZE=128; phatk kernel found here | ||
5830 | 328 | - | - | - | 1040 | - | 2.4 | PCI-E 2.1 x16 | LinuxCoin 0.2.1b / phoenix / phatk | 1.195 V, RAM @ 325 Mhz, fan @90%, no case, extra 10K RPM fan (62 deg.C in full-load); options: -k phatk DEVICE=0 VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 WORKSIZE=256; brand: Sapphire Xtreme; bord is stable up to 1060 Mhz ~ 335 MHash, but produces some visual artefacts; | |
5830 | 333 | - | - | - | 1040 | - | 2.4 | PCI-E 2.1 x16 | LinuxCoin 0.2.1b / phoenix-1.50 / phatk-mod | + ~5 Mhash increase using the modified phatk from the user above. I am the same guy with 330 @ 1040 MHz Sapphire Xtreme, all other settings the same, board stable, no increase in rejected | |
5830 | 334 | - | - | 1030 | - | 2.4 | PCI-E 2.1 x16 | phoenix 1.50 / phatk 2.0 / Win7 64 | Stock voltage, 385Mhz Memory, VECTORS AGGRESSION=12 WORKSIZE=256 BFI_INT -- (upped from 330 achieved with diapolo mod here), now using phatk 2.0 found here | ||
5830 | 342 | - | - | - | 1045 | - | 2.4 | PCI-E 2.0 x8 | phoenix 1.48 / phatk 2.2 / WinSvr 2008 R2 64 | Stock voltage, 385Mhz Memory, VECTORS VECTORS4 FASTLOOP=false AGGRESSION=14 BFI_INT -k phatk-2.2 | |
5830x2 CF | 480 | - | - | 800 | - | 2.4 | PCI-E 2.1 x16 | Guiminer -v -f70 -w128 | |||
5830x2 | 570 | - | - | 950 | - | 2.4 | PCI-E 2.1 x8 | Guiminer/ - / Win7 64bit poclbm | poclbm -v -w256 -f10 MEMORYCLOCK 300MHZ GPUCLOCK 950MHZ FAN 52% 72°C | ||
5850 | 240.77 | 1.595 | 1.49 | 151 | 725 | 1440 | - | PCI-E 2.1 x16 | - | ||
5850 | 250.26 | 1.657 | 151 | 725 | 1440 | - | PCI-E 2.1 x16 | opencl client | source | ||
5850 | 252 | 1.575 | 160 | 765 | 1440 | 2.3 | PCI-E 2.1 x16 | poclbm 2011-01-25 | |||
5850x4 | 1360 | 1.94 | 700@wall | 900 | poclbm | ||||||
5850 | 255.3 | 1.593 | 160 | 765 | 1440 | 2.2 | PCI-E 2.1 x16 | poclbm 2011-01-25 | |||
5850 | 264 | 1.748 | 151 | 725 | 1440 | 2.4 | PCI-E 1.0 x8 | guiminer-20110501 | -v -w128 | ||
5850 | 280 | 1.75 | 160 | 765 | 1440 | 2.2 | PCI-E 2.1 x16 | Phoenix 1.3 | with BFI_INT | ||
5850 | 280 | - | - | 725 | 1440 | 2.1 | PCI-E 2.1 x16 | Phoenix 1.50 / Fedora 14 | -v -k poclbm VECTORS AGGRESSION=8 WORKSIZE=128 BFI_INT FASTLOOP=true | ||
5850 | 292 | 1.825 | 160 | 765 | 1440 | 2.1 | PCI-E 2.1 x16 | poclbm 2011-04-28 -v -f 1 | |||
5850 | 298 | 1.8620 | 160 | 765 | 1440 | 2.1 | PCI-E 2.1 x16 | poclbm 2011-04-28 -v -f 1 -w 64 | |||
5850 | 300 | 1.5460 | 194 | 925(OC) | 1440 | - | PCI-E 2.1 x16 | m0mchil's OpenCL | source | ||
5850 | 314 | 1.8362 | 171 | 820(OC) | 1440 | 2.4 | PCI-E 1.0 x8 | poclbm | -v -w128 | ||
5850 | 328 | TBD | TBD | 875 @ Stock voltage | 1440 | 2.4 | PCI-E 2.1 x16 | phoenix | 70C @42% fan, mem @ 500mhz; -v -k phatk VECTORS BFI_INT AGGRESSION=8 FASTLOOP=false WORKSIZE=128 | ||
5850 | 330 | - | - | 850 @ Stock voltage | 1440 | 2.1 | PCI-E 2.0 x16 | phoenix | EAH5850, miner arguments: -k poclbm DEVICE=1 VECTORS AGGRESSION=8 WORKSIZE=128 BFI_INT FASTLOOP=false | ||
5850 | 331 | - | - | 725 (Stock) | 2.4 | PCI-E 2.0 x16 | Diablo Win7 64bits | Sapphire 5850 Xtreme, Arguments: -v 2 -w 192 (by Swapper 2011-07-05) | |||
5850 | 335 | 1.8611 | 180 | 890(OC) | 1440 | 2.4 | PCI-E 2.0 x8 | poclbm | -v -w128, Memory downclocked to 300Mhz | ||
5850 | 344 | 1.8594 | 185 | 890(OC) | 1440 | - | PCI-E 2.0 x16 | phoenix | |||
5850 | 347 | - | - | 876 | 1440 | 2.4 | PCI-E 2.0 x16 | guiminer / phoenix 1.48 / phatk / Win7 64 | 300Mhz Memory clock, 50% fan-speed, -k phatk VECTORS BFI_INT AGGRESSION=11 FASTLOOP=false WORKSIZE=256 | ||
5850 | 354 | - | - | 900(OC) | 1440 | 2.1 | PCI-E 2.0 x16 | diablo -v 2 -w 128 | Ubuntu 11.04 64-bit Headless, catalyst 11.5, memory downclocked to 300mhz, stock voltage. flashed with atiflash video | ||
5850 | 355 | - | - | 900(OC) | 1440 | 2.1 | PCI-E 2.0 x16 | phoenix 1.48 / phatk | Ubuntu 11.04 64-bit, Memory downclocked to 200MHz, VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 WORKSIZE=128 | ||
5850 | 355 | - | - | 900 | 1440 | 2.1 | PCI-E 2.0 x16 | phoenix 1.48 / phatk / Ubuntu 11.04 x64 | 300Mhz Memory clock, 60% fan-speed, -k phatk VECTORS BFI_INT AGGRESSION=11 FASTLOOP=false WORKSIZE=256 | ||
5850 | 359 | - | - | 900 | 1440 | 2.4 | PCI-E 2.0 x16 | phoenix 1.50 / phatk / Ubuntu 11.04 x64 | 300Mhz Memory clock, 66% fan-speed, -k phatk VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=256 | ||
5850 | 365 | - | - | 920 | 1440 | 2.1 | PCI-E x16 | phoenix 1.48 / phatk / Win7 64 | 300Mhz memory clock VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=256 | ||
5850 | 367.5 | - | - | 900(OC) | 1440 | 2.1 | PCI-E 1.0 x16 | diablo with bitless's hack, -v 2 -w 128 | RHEL 5U5 x86_64, catalyst 11.5, Sapphire HD 5850 Xtreme, Memory downclocked to 300MHz, core voltage 1.145V, BIOS modded with RBE | ||
5850 | 369.4 | - | - | 930 | 1440 | 2.4 | PCI-E 1.0 x16 | guiminer / phoenix / phatk / Win7 32 | Catalyst 11.5, XFX HD5850, Memory downclocked to 322MHz, -k phatk VECTORS BFI_INT AGGRESSION=13 WORKSIZE=256 | ||
5850 | 375 | - | - | 940 | 1440 | 2.4 | PCI-E 2.0 x16 | phoenix 1.50 / phatk / Ubuntu 10.04 | 300Mhz memory clock VECTORS AGGRESSION=13 WORKSIZE=256 BFI_INT FASTLOOP=false | ||
5850 | 382 | 1.8454 | 207 | 995(OC) | 1440 | - | PCI-E 2.0 x8 | phoenix | OC 1.177v on core | ||
5850 | 386 | - | - | 970 | 1440 | 2.4 | PCI-E 2.0 x16(@x8) | guiminer / phoenix 1.48 / phatk / Win7 64 | 5870 bios flash, Mem @300, fan@58%, Temp@80oC, 1.163Vcore, -k phatk VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=256 (two concurrent miners, each miner with diff CPU affinity) | ||
5850 | 391 | - | - | 1000 | 1440 | 2.1 | PCI-E 2.0 x16(@x8) | phoenix 1.5 / phatk / Win7 64 | Mem @ 280, fan @ 100%, Temp @ 71, 1.163 V core, -v -k phatk VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=256, The name is Mautobu | ||
5850 | 392 | - | 2.43 | - | 990 | 1440 | 2.4 | PCI-E 2.1 x16 | phoenix-svn (AUR) / phatk / Arch Linux | Memory: 180MHz, -v -q 1 -k phatk WORKSIZE=128 VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false | |
5850 | 408 | - | - | - | 999/275 | 1440 | 2.4 | PCI-E 2.1 x16 | phoenix 1.50 / phatk-mod / Ubuntu 10.04 | Fan 70%, temp < 60 deg C, Sapphire 5 heatpipe card, same flags as above/below (edit1- oops, no voltage tweaks... edit2- wow, phatk-mod makes a difference... catfish) | |
5850 | 400 | - | - | 1000 | 1440 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.5 Win7 x64 | Memory 600MHz, Vcore 1.225, 73C, -k phatk WORKSIZE=128 VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false, 3% phatk mod | ||
5850 | 420 | - | - | 1055 | 300 | 2.5 | PCI-E 2.0 1x>16x | phoenix 1.5 / phatk 3% mod / Win7 64 11.6 | Fan 80%, 66C, 1.250 Vcore, -k phatk PLATFORM=0 DEVICE=0 VECTORS BFI_INT AGGRESSION=8 And proof: http://i.imgur.com/s9hqs.png | ||
5850 | 397 | - | - | 950 | 1440 | 2.5 | PCI-E 2.1 16x | phoenix 1.5 / phatk 2.2 / Win7 64, catalyst 11.6 | Mem speed 350Mhz, Fan 85%, 70C, 1.083 Vcore, -k phatk VECTORS BFI_INT AGGRESSION=12 FASTLOOP=false WORKSIZE=256 | ||
5850 | 412 | - | - | 1010 | 1440 | 2.4 | PCI-E 2.0 1x>16x | phoenix 1.5 / phatk 3% mod / Win7 64 11.5 | VECTORS BFI_INT AGGRESSION=12 -k phatk | ||
5850 | 431 | - | - | 1040 | 1440 | 2.4 | PCI-E 2.0 4x>16x | phoenix-svn / phatk kernel / Debian Wheezy AMD64 + fglrx 11.6 | fan 100%, vcore 1.1750 V, 72C, VECTORS BFI_INT AGGRESSION=15 FASTLOOP=false -k phatk, proof: http://imageshack.us/photo/my-images/199/431u.png/ | ||
5850x3 | 1,010 | - | - | 850 | - | 2.4 | PCI-E 2.0 (x3) | GUIMiner | MSI Afterburner settings: 850MHz core clock and 500MHz memory clock | ||
5870M | 152.5 | - | - | 750(OC) | 1000 | 2.1 | PCI-E 2.1 x16 | gui-miner (win-7) | |||
5870 | 313.65 | 1.668 | 1.65 | 188 | 850 | 1600 | 2.1 | PCI-E 2.1 x16 | clmine | ||
5870 | 313 | 1.665 | 188 | 900? | 1600 | 2.3 | PCI-E 2.1 x16 | Diablo/Linux | |||
5870 | 343 | 1.824 | 188 | 900? | 1600 | 2.1 | PCI-E 2.1 x16 | Diablo/Linux | |||
5870 | 355 | 1.888 | 188 | 900? | 1600 | 2.1 | PCI-E 2.1 x16 | poclbm/Linux | |||
5870 | 340 | 1.809 | 188 | 850 | 1600 | - | PCI-E 2.1 x16 | m0mchil's OpenCL | source | ||
5870 | 360 | 1.6822 | 214 | 970 | 700 | - | PCI-E 2.0 x16 | m0mchil's OpenCL w7-64 | -f 0 -v -w 128 source | ||
5870 | 379 | 2.015 | 188 | 850 | 1600 | - | PCI-E 2.0 x16 | hashkill-0.2.5 alpha | -D -G2 | ||
5870 | 397 | - | - | 930 | 1600 | 2.4 | PCI-E 2.0 x16 | Phoenix 1.48 | -k phatk VECTORS BFI_INT AGGRESSION=10 WORKSIZE=128 | ||
5870 | 408 | 1.8888 | 216 | 980 | 1600 | 2.1 | PCI-E 2.0 x16 | poclbm/Win7x64 | -f 20 -v -w 128, BIT_ALIGN, BFI_INT | ||
5870 | 400 | 1.9047 | 210 | 950 | 1600 | 2.4 | PCI-E 2.0 x8 | Phoenix 1.3 | -k poclbm VECTORS AGGRESSION=7 FASTLOOP BFI_INT | ||
5870 | 421.5 | 2.007 | 201 | 950 | 1600 | - | PCI-E 2.0 x16 | hashkill-0.2.5 alpha | -D -G2 (GPU OC to 900, memory downclocked to 900) | ||
5870 | 414 | 1.9255 | 215 | 975 | 1600 | 2.4 | PCI-E 2.0 x16 | guiminer/w7x64 | -k poclbm -v -w 256 -f 1 VECTORS BITALIGN BFI_INT -- Memory Clock 300 | ||
5870 | 420 | 2.0000 | 210 | 950 | 1600 | 2.4 | PCI-E 2.0 x16 | Phoenix 1.48 | -k phatk VECTORS BFI_INT AGGRESSION=14 WORKSIZE=256 -- Memory Clock 300Mhz | ||
5870 | 421 | 1.9581 | 215 | 975 | 1600 | 2.4 | PCI-E 2.0 x16 | Phoenix 1.47 | VECTORS BFI_INT AGGRESSION=13 -k phatk | ||
5870 | 440 | 2.0000 | 220 | 995 | 1600 | 2.4 | PCI-E 2.0 x16 | Phoenix | |||
5870 | 438 | 1.9819 | 221 | 1000(OC) | 1600 | 2.1 | PCI-E 2.0 x16 | poclbm/Linux | -v -w 64 -f 1 | ||
5870 | 458 | - | - | 1040 | 1600 | 2.1 | PCI-E 2.0 x16 | poclbm/Windows 7 64 | -v -w 256 -f 1 Crossfired, Water cooled, 916 Mhash/s total. Best dual gpu setup me thinks? The name is Mautobu. | ||
5870 | 435 | - | - | 990 | 300 | 2.4 | PCI-E 2.0 x8 | LinuxCoin v0.2b phoenix/phatk | (Powercolor brand) -k phatk VECTORS BFI_INT WORKSIZE=256 AGGRESSION=11 FASTLOOPS=false | ||
5870 | 445 | 2.28 | 2.34 | 195 | 1005 | 335 | 2.4 | PCI-E 2.0 x4 | Ubuntu 11.04 phoenix/phatk | (Asus brand, volts = 1'072) -k phatk VECTORS BFI_INT WORKSIZE=256 AGGRESSION=12 FASTLOOPS=false -a 7 (-a 10) | |
5870 | 430 | 980 | 1600 | 2.4 | PCI-E 2.0 x16 | Phoenix 1.48/Windows 7 64 | -k phatk VECTORS BFI_INT AGGRESSION=14 WORKSIZE=256 -- Memory Clock 300Mhz | ||||
5870 | 453 | 980 | 1600 | 2.5 | PCI-E 2.1 x16 | Phoenix 1.50/Windows 7 64 catalyst 11.6 phatk 2.2 | -k phatk VECTORS BFI_INT AGGRESSION=12 WORKSIZE=256 FASTLOOPS=false -- Memory Clock 350Mhz Vcore 1.163v | ||||
5870 | 460 | 1050 | 1600 | 2.4 | PCI-E 2.0 x16 | Guiminer | -k phatk VECTORS BFI_INT AGGRESSION=14 WORKSIZE=256 -- Memory Clock 300Mhz vcore @ 1225mV | ||||
5870 | 460 | 1020 | 1600 | 2.4 | PCI-E 2.0 x16 | Phoenix 1.50/Windows 7 64 | VECTORS BFI_INT AGGRESSION=12 WORKSIZE=256 -k phatk -- Memory Clock 300Mhz vcore @ 1225mV, 3% phatk mod | ||||
5870x2 (CF) | 864 | - | - | 900 | 3200 | 2.1 | PCI-E 2.1 x16 | guiminer | -k phatk VECTORS FASTLOOP=false AGGRESSION=7 BFI_INT WORKSIZE=128 (Same flags per GPU) | ||
5870x2 (Ares) | 620 | - | - | 850 | 3200 | 2.1 | PCI-E 2.1 x16 | guiminer | -v -w 128 | ||
5870x2 (Ares) | 826 | 0.751 | 1100 | 950 | 3200 | 2.1 | PCI-E 2.1 x16 | phoenix 1.4 w/ Phtak | AGGRESSION=13 WORKSIZE=128 VECTORS BFI_INT Memory @ 300MHz | ||
5870x2 (Ares) | 826 | 1.18 | 700 | 935 | 3200 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 w/ Phatk | AGGRESSION=13 WORKSIZE=256 VECTORS BFI_INT FASTLOOP=false, memory @ 319 MHz, Windows 7 32-bit | ||
5870x2 (Ares) | 878 | 0.585 | 1500 | 1000 | 3200 | 2.1 | PCI-E 2.1 x16 | phoenix 1.7 w/ Phtak | AGGRESSION=13 WORKSIZE=128 VECTORS BFI_INT Memory @ 300MHz | ||
5970 | 530 | 1.803 | 0.53 ? | 294 | 725 | 3200 | 2.4.595.10 | PCI-E 2.1 x16 | poclbm/201103.beta3/Windows | -v -w128 -f60 | |
5970 | 535.06 | 1.820 | 294 | 725 | 3200 | 2.1 | PCI-E 2.1 x16 | clmine | |||
5970 | 560 | 1.905 | 294 | 725 | 3200 | - | PCI-E 2.1 x16 | Diablo | |||
5970 | 565 | 1.922 | 294 | 725 | 3200 | 2.1 | PCI-E 2.1 x16 | clmine2 | |||
5970 | 604 | 2.054 | 294 | 725 | 3200 | 2.1 | PCI-E 2.1 x16 | clmine | |||
5970 | 645 | 1.875 | 344 | 850 | 3200 | 2.1 | PCI-E 2.1 x16 | m0mchil/poclbm 03-07-11 | -f1, Debian 6, fglrx-driver 10.9.3 | ||
5970 | 740 | 2.1511 | 344 | 850 | 3200 | 2.1 | PCI-E 2.1 x16 | phoenix/1.3 | AGGRESSION=12 WORKSIZE=128 VECTORS BFI_INT, memory clock @ 300MHz | ||
5970 | 755 | 2.2076 | 342 | 848 | 3200 | 2.1 | PCI-E 2.1 x16 | poclbm 28-04-11 | -f 1 -w 256 -v, Ubuntu 10.10, fglrx 11.4, memory clock @ 300MHz | ||
5970 | 802 | 2.31 | 347 | 850 | 3200 | 2.4 | PCI-E 2.1 x16 | phoenix poclbm Ubuntu 11.04 | -q 6 -k AGGRESSION=19 WORKSIZE=128 BFI_INT VECTORS, fglrx 11.4, mem clock @ 1000MHz | ||
5970 | 822.2 | - | - | 950 | 3200 | 2.4 | PCI-E 2.1 x16 | phoenix win7 | -k phatk -q 6 AGGRESSION=20 WORKSIZE=128 BFI_INT VECTORS, but with this increasing difficulty mining becomes pretty pointless | ||
5970 | 863.4 | - | - | 955 | 3200 | 2.4 | PCI-E 2.1 x16 | Diablo - Debian | -v 2 -w 256 (XFX Radeon HD 5970 Black Edition) | ||
6310M | 9.821 | 0.545 | 18 | 500 | 80 | 2.4 | Integrated/APU | poclbm-gui -v -w128 | HP DM1z 18W TDP is shared with the CPU | ||
6470M | 24.1 | - | - | - | - | 2.1 | Integrated/APU | guiminer | |||
6470M | 31.0 | - | - | - | - | 2.1 | Integrated/APU | phoenix 1.48 | |||
6490M | 17.18 | - | - | - | - | - | PCI-E 2.1 x16 | phoneix 1.50 with poclbm, Mac OS X 10.6.7 | MacBook Pro 2,8 VRAM: 256MB. phoenix -k poclbm VECTORS BFI_INT FASTLOOP | ||
6490M | 16.289 | 0.708 | 23 | - | - | - | PCI-E 2.1 x16 | poclbm-mod (Mac OS X 10.6.7) | MacBook Pro early 2011 | ||
6490M | 15.21 | - | - | - | - | - | - | DiabloMiner GUI v2011-05-22 / Mac OS X 10.6.7 | Model: MacBookPro8,2 VRAM: 256MB | ||
6490M | 32.1 | - | - | - | - | - | - | guiminer 2011-07-01 with poclbm (Win7-x64) | MacBookPro8,2 (WinX64) -v -w128 -f0 | ||
6520G | 33.8 | - | - | 400 | 320 | - | Integrated/APU | guiminer 2011-07-01 with OpenCL (Win7-64bit) | -v -w128 on Toshiba L775D-S7222 | ||
6570 | 68.0 | 1.133 | 60 | 650 | 480 | 2.4 | PCI-E x16 | guiminer 2011-05-21 with poclbm (Win7-32bit) | no extra option for miner . Sapphire 6570 gddr5 512mb | ||
6570 | 82.1 | 1.368 | 60 | 650 | 480 | 2.4 | PCI-E x16 | guiminer 2011-05-21 with poclbm (Win7-32bit) | -v -w128 . Sapphire 6570 gddr5 512mb | ||
6550D | 67.6 | - | - | 600 | 400 | 2.5 | FM-1 | guiminer 2011-07-01 with OpenCL (Win7-64bit) | -v -w128 -f2 | ||
6670 | 102.20 | - | - | 800 | - | - | PCI-E 2.1 x16 | poclbm/Debian sid | -v -f 0 -w 128 | ||
6670 | 104.00 | - | 1.0 | - | 820 | - | - | PCI-E 2.1 x16 | guiminer(poclbm)/Win 7 | -v -a4 -f15 -d0 -w64 | |
6750 | 167.59 | - | - | 870 | - | - | PCI-E 2.1 x16 | guiminer | -v -f30 -w128 | ||
6770 | 180 | - | - | 850 | 1200 | - | - | guiminer | -v -w128 , this was an XFX (OEM) model, GPU @ 850 MHz, mem @ 1200 MHz; I pushed it up to 190 Mhash/s briefly by overclocking, but it crashed the system above that | ||
6770 | 202 | - | - | 960 | 800 | - | PCI-E 2.1 x1,x4,x8,x16 | phoenix 1.48 | Sapphire 6770 (standard) -q2 -k poclbm DEVICE=0 AGGRESSION=10 VECTORS WORKSIZE=128 BFI_INT FASTLOOP (The PCI-E speed does not affect the mining speed) | ||
6770 | 217 | - | - | 960 | 800 | - | PCI-E x16 | Guiminer with phoenix | Sapphire 6770 -k phatk VECTORS BFI_INT WORKSIZE=128 FASTLOOP=false AGGRESSION=12 with https://forum.bitcoin.org/index.php?topic=22965.0 modification | ||
6770 | 235 | - | - | 1010 | 300 | 2.4 | PCI-E 2.0 x8 | Phoenix 1.50 | Sapphire 6770 -k phatk PLATFORM=0 DEVICE=0 VECTORS BFI_INT WORKSIZE=256 FASTLOOP=false AGGRESSION=13 3% mod https://forum.bitcoin.org/index.php?topic=22965.0 and AS5 paste on core w/ external 12" fan 50C full load. Stock voltage. | ||
6770x2 | 470 | - | - | 1010 | 300 | 2.4 | PCI-E 2.0 x8 | Phoenix 1.50 | Sapphire 6770 -k phatk PLATFORM=0 DEVICE=0 VECTORS BFI_INT WORKSIZE=256 FASTLOOP=false AGGRESSION=13 3% mod https://forum.bitcoin.org/index.php?topic=22965.0 and AS5 paste on core w/ external 12" fan 50C full load. Stock voltage. | ||
6790 | 220 | 1.467 | 150 | 800 | - | - | PCI-E 2.1 x16 | Phoenix 1.48 | -k phatk BFI_INT FASTLOOP AGGRESSION=12 VECTORS OC'd to 1ghz, underclocked mem to 300, voltage at 1175 | ||
6790 | 219 | 1.467 | 150 | 960 | - | - | PCI-E 2.1 x16 | guiminer | -v -f0 -w128 / GPU OC to 960MHz under Windows7 64bit | ||
6850 | 171.59 | 1.351 | 1.07 | 127 | 775 | 960 | 2.1 | PCI-E 2.1 x16 | clmine | ||
6850 | 196 | - | - | 850 | 960 | - | PCI-E 2.1 x16 | poclbm | -v -w 128 -f 0 | ||
6850 | 220 | 1.236(*) | 178(*) | 1000(OC) | 960 | 2.4RC1 | PCI-E 2.1 x16 | poclbm | -v -w 128 -f 30 (*: Overclocked wattage calculated here ) | ||
6850 | 234.8 | - | - | 940 | 960 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.3 | AGGRESSION=8 WORKSIZE=128 VECTORS BFI_INT | ||
6850 | 236.0 | - | - | 940 | 960 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.4 | -k phatk AGGRESSION=12 WORKSIZE=128 VECTORS BFI_INT, Core @ 900MHz, Memory @ 300MHz | ||
6850 | 244.2 | - | - | 960 | 960 | 2.1 | PCI-E 2.0 x16 | poclbm june-2011 | -v -w 128 | ||
6850 | 245.1 | - | 200 | 940 | 960 | 2.4 | PCI-E 2.0 x16 | guiminer (Phoenix) | Sapphire 6850 (Memory @1000MHz); Win7 64bit; flags: -k phatk VECTORS BFI_INT FASTLOOP=false AGGRESSION=14 WORKSIZE=128 | ||
6850 | 250 | 1.612(*) | - | 155(*) | 940 (OC) | 960 | 2.4 | PCI-E 2.0 x16 | AOCLBF 1.74 (Phoenix 1.5**) @Win7/x64 | XFX 6850 (Memory @840MHz; Vdcc @1.148V; Fan @74%; Temp @70C; System @39C); flags: -k phatk BFI_INT FASTLOOP VECTORS AGGRESSION=11 WORKSIZE=128 (*: Overclocked wattage calculated here / **: Tainted Kernel) | |
6850 | 267.2 | 1.67 | - | 1010(OC) | 960 | 2.4 | PCI-E 2.0 x16 | guiminer / phoenix 1.50 | -k phatk VECTORS BFI_INT AGGRESSION=11 worksize=128 FASTLOOP=false | ||
6850 | 301.4 | 1.67 | - | 2.4 | PCI-E 2.0 x16 | guiminer / poclbm | -v -f 2 -w 128 clock @ 985 mem @ 890 | ||||
6870 | 232.47 | 1.540 | 1.22 | 151 | 900 | 1120 | - | PCI-E 2.1 x16 | poclbm -v -w 128 | ||
6870 | 277.47 | - | - | 940 | 1120 | - | PCI-E 2.1 x16 | Phoenix 1.3 | AGGRESSION=8 WORKSIZE=128 VECTORS BFI_INT | ||
6870 | 271 | 1.807 | 150 | 940 | 1120 | 2.4 | PCI-E 2.0 x16 | poclbm -v -w 128 | Debian 6.0.1 x86_64 | ||
6870 | 260.1 | 1.611 | 175 | 1001 | 1120 | 2.2 | PCI-E 2.1 x16 | poclbm-gui windows7x86 cat 11.3 | -v -w 128 -f 1 | ||
6870 | 279 | 1.847(?) | 151(?) | 900 | 1120 | 2.4 | PCI-E 2.1 x16 | hashkill-0.2.5 alpha cat 11.4 sdk 2.4 | -G2 -D stock clocks, debian linux 64bit | ||
6870 | 281.7 | 1.172 (stock) | - | 980 | 1120 | 2.4 | PCI-E 2.1 x16 | guiminer-v2011-06-09 | xfx6870, flags: -v 19 -w 128, win7 32-bit | ||
6870 | 293.13 | - | 945 | 1050 | 2.5 | PCI-E 2.1 x16 | Phoenix 1.5 Phatk | xfx6870, Catalyst 11.6, 1.5 Phoenix flags: -k phatk FASTLOOP=false DEVICE=0 VECTORS BFI_INT AGGRESSION=13 WORKSIZE=128; http://forum.bitcoin.org/index.php?topic=25860.0 Kernel Patch; http://forum.bitcoin.org/index.php?topic=6458.0 Cmd; http://developer.amd.com/tools/gDEBugger/Pages/default.aspx No Crossfire Required; runs faster without crossfire 1% + additional 3% from update | |||
6870 | 294 | - | 980 | 1120 | 2.4 | PCI-E 2.1 x16 | phoenix phatk | xfx6870, 340MHz memory clock, Catalyst 11.6, flags: BFI_INT VECTORS AGGRESSION=9 WORKSIZE=256 | |||
6870 | 300.06 | 1.830 | 164 | 1020 | 1120 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.4 cat 11.4 | VECTORS BFI_INT AGGRESSION=8 fastloop mem clock 344 | ||
6870 | 311 | 1.777(?) | 175(?) | 1000 | 1120 | 2.4 | PCI-E 2.1 x16 | hashkill-0.2.5 alpha cat 11.4 sdk 2.4 | -G2 -D overclocked to 1000, debian linux 64bit | ||
6870 | 300 | 1.72 | 174 | 1038 | 1120 | 2.4 | PCI-E 2.1 x16 | poclbm windows7x86 cat 11.4 | -v -w128 -f1 mem clock 360, fan 100% temp 73C | ||
6870 | 310 | - | - | 1035 | 1120 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 phatk 11.5 sdk 2.4 | BFI_INT VECTORS FASTLOOP=false AGGRESSION=12 WORKSIZE=128, mem clock @ 300MHz, voltage @ 1.300 | ||
6870 | 314 | - | - | 1030 | 1120 | 2.4 | PCI-E 2.1 x16 | phoenix 1.50 / phatk / Linux | VECTORS BFI_INT AGGRESSION=11 FASTLOOP=false WORKSIZE=256 | ||
6870 | 316 | - | - | 1030 | 1120 | 2.4 | PCI-E 2.1 x16 | guiminer 2011-06-09 using phoenix (Win7-32bit) | -k phatk platform=0 device=0 VECTORS BFI_INT AGGRESSION=11 worksize=128 FASTLOOP=false, mem clock @ 228MHz, voltage @ 1.25, Fan @ 40%, Temp @ 73C | ||
6870 | 322 | 1.882 | 170 | 1050 | 1120 | 2.4 | PCI-E 2.1 x16 | phoenix 1.47 phatk 11.5 sdk 2.4 | BFI_INT VECTORS FASTLOOP=false AGGRESSION=12 WORKSIZE=256, mem clock @ 400MHz | ||
6870 | 329 | - | - | 1075 | 1120 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 phatk 11.5 sdk 2.4 | BFI_INT VECTORS FASTLOOP=false AGGRESSION=11 WORKSIZE=256 | ||
6870 | 245 | - | - | 900 | 1120 | 2.4 | PCI-E 2.0 x16 | ph rising 1.45 phoenix 1.50 phatk 11.5 sdk 2.4 | HD5xxx+ Fastloop phatk AGGRESSION=10 | ||
6870 | 297 | - | - | 1000 | 1120 | 2.4 | PCI-E 2.0 x16 | ph rising 1.62 phoenix 1.50 phatk 11.5 sdk 2.4 | Vectors HD5xxx+ Fastloop phatk AGGRESSION=11 WORKSIZE=128 | ||
6870 | 321 | - | - | 1050 | 1120 | 2.4 | PCI-E 2.1 x8 | aoclbf 1.7 phoenix 1.50 11.6 | Vectors HD5xxx+ phatk AGGRESSION=13 WORKSIZE=256, Memory=325MHz, Volts=1.3V, Fan~55%, Temps~70C | ||
6870 | 332 | - | 1.74 | - | 1050 | 1120 | 2.4 | PCI-E 2.1 x16 | guiminer 2011-06-14 using phoenix (Win7-32bit) | -k phatk platform=0 device=0 VECTORS BFI_INT AGGRESSION=13 worksize=128 FASTLOOP=false, mem clock @ 228MHz, voltage @ 1.3, Fan @ 60%, Temp @ 74C, flash and browser hardware acceleration disabled, aero enabled. | |
6870 | 295 | 2.02 | 1.64 | 146 | 950 | 1120 | 2.4 | PCI-E 2.1 x16 | hashkill latest as of 7/6/11 (ubuntu 11.4) | hashkill-gpu -p bitcoin user:pass:server -D, mem clock 850, voltage @ 1.175, Fan @ 70%, Temp @ 71C. | |
6870x4 | 1180 | - | - | 145 | 950 | 1120 | 2.4 | PCI-E 2.1 x16 | poclbm/debian32bit | -v -w128, Gigabyte SOC. voltage 1.175 (default), GPU default 950 MHz, Mem downclocked to 300 MHz, Fan 4x100% (+ 2x12cm fun 1300rpm), Temp 4x75C (in summer). | |
6870x4 | 1200 | - | - | 150 | 970 | 1120 | 2.4 | PCI-E 2.1 x16 | poclbm/debian32bit | -v -w128, Gigabyte SOC. voltage 1.175 (default), GPU overclocked from 950 to 970 MHz, Mem downclocked to 300 MHz, Fan 4x100% (+ 2x12cm fun 1300rpm), Temp 4x75C (in summer). Unstable with GPU@975 MHz. | |
6950 | 272 | - | 0.90 | - | 900 | 1408 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48/poclbm | max stable @ 1150 mV, AGGRESSION = 7, BFI_INT, MSI 6950 | |
6950 | 291 | - | - | 920 | 1408 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48/poclbm | max stable @ 1200mV, AGGRESSION = 7, BFI_INT, MSI 6950 | ||
6950 | 295 | - | - | 930 | 1408 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48/poclbm | max stable @ 1275mV, AGGRESSION = 7, BFI_INT, MSI 6950 | ||
6950 | 300 | - | - | 940 | 1408 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48/poclbm | max stable @ 1300mV, AGGRESSION = 7, BFI_INT, MSI 6950 | ||
6950 | 295 | 1.844(?) | 160(?) | 810 | 1536 | 2.4.595.0 | PCI-E 2.1 x16 | m0mchil/poclbm 03-07-11 | unlocked shaders, default mem 1250 | ||
6950 | 314 | - | - | 800 | 1408 | 2.4.595.0 | PCI-E 2.1 x16 | guiminer/poclbm 05-01-11 | -v -f30 -w128 default mem 1250 Stock Sapphire 6950 1gb | ||
6950 | 325 | 1.635(?) | 200(?) | 885 | 1536 | 2.4.595.0 | PCI-E 2.1 x16 | m0mchil/poclbm 03-07-11 | unlocked shaders, default mem 1250 | ||
6950 | 332 | ~1.95 | ~1.2 | ~170 | 840 | 1408 | 2.5.684.212 | PCI-E 2.1 x16 | guiminer/poclbm 2011-06-14 | -v -w 128 -f 0, WinXP x86, Cat11.6b, desktop on IGP, Sapphire 1GB w/ HW locked BIOS, +40MHz GPU OC, 160W ACP + 5% OC = 170W new estimated ACP | |
6950 | 333 | ~1.95 | ~1.2 | ~170 | 840 | 1408 | 2.4.650.9 | PCI-E 2.1 x16 | guiminer/poclbm 2011-06-14 | -v -w 128 -f 0, WinXP x86, Cat11.6, desktop on IGP, Sapphire 1GB w/ HW locked BIOS, +40MHz GPU OC, 160W ACP + 5% OC = 170W new estimated ACP | |
6950 | 338 | ~1.84 | - | ~184 | 860 | 1408 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.50/poclbm kernel | Sapphire 2GB card w/ HW locked BIOS; Cat 11.6, Win7 x64; core @ 860MHz & 1087mV (OC + undervolt), mem @ 860MHz; cmd line args: VECTORS BFI_INT AGGRESSION=11 WORKSIZE=128; power and MH/J calculated using Power = C*f*v^2 w/ assumption of 175 W at stock settings w/ 100% GPU util. (not measured) | |
6950 | 340 | - | - | 895 | 1408 | 2.4 | PCI-E 2.1 x16 | guiminer/poclbm 05-21-11 | -v -w 128, mem @ 500, 1200 mV, MSI 6950 | ||
6950 | 340 | - | - | 800 | 1536 | (?) | PCI-E 2.1 x16 | guiminer/poclbm 05-21-11 | -v -f30 -w128 default mem 1250,Sapphire 6950 1gb, unlocked shaders | ||
6950 | 343 | 2.14 | - | 160 | 840 | 1536 | 2.4 | PCI-E 2.1 x16 | phoenix 06-27-11 | VECTORS BFI_INT AGGRESSION=11 WORKSIZE=128 FASTLOOP=false, HIS H695FN2G2M 2GB, mem @ 720, Kill-a-Watt measured | |
6950 | 344 | ~2.02 | ~1.27 | ~170 | 840 | 1408 | 2.5.684.212 | PCI-E 2.1 x16 | poclbm/20110709 | -v -w 128 -f 0, WinXP x86, Cat11.6b, desktop on IGP, Sapphire 1GB w/ HW locked BIOS, +40MHz GPU OC, 160W ACP + 5% OC = 170W new estimated ACP | |
6950 | 349 | 1.745(?) | 200(?) | 800 | 1408 | - | PCI-E 2.1 x16 | guiminer/poclbm 05-21-11 | -v -f30 -w128, xfx 6950 xxx 1gb, locked shaders, core 900, mem 650, 79° C | ||
6950 | 351 | ~1.91 | - | ~184 | 860 | 1408 | 2.4 | PCI-E 2.1 x16 | GUIminer/poclbm v2011-07-01 | Sapphire 2GB card w/ HW locked BIOS; Cat 11.6, Win7 x64; core @ 860MHz & 1087mV (OC + undervolt), mem @ 860MHz; cmd line args: -v -w 128 -f 0; (same system as the 338 MH/s result above using Phoenix) | |
6950 | 360 | 1.8(?) | 200(?) | 970 | 1536 | 2.4.595.0 | PCI-E 2.1 x16 | m0mchil/poclbm 03-07-11 | unlocked shaders, default mem 1250 | ||
6950 | 360 | - | - | 870 | 1375 | - | PCI-E 2.1 x16 | guiminer/poclbm | flashed with 6970 BIOS, -v -f30 -w128 | ||
6950 | 365 | - | - | 925 | 1408 | - | PCI-E 2.1 x16 | guiminer/poclbm | stock bios, -v -f0 -w128, MSI twinfrozr III 2GB | ||
6950 | 344.4 | - | - | 800 | 1536 | - | PCI-E 2.1 x16 | guiminer/poclbm | Powercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1. | ||
6950 | 352.8 | - | - | 820 | 1536 | - | PCI-E 2.1 x16 | guiminer/poclbm | Powercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1. | ||
6950 | 366.4 | - | - | 850 | 1536 | - | PCI-E 2.1 x16 | guiminer/poclbm | Powercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1. | ||
6950 | 383 | - | - | 975 | 1408 | - | PCI-E 2.1 x16 | guiminer/poclbm | stock bios, -v -f0 -w128, voltage 1.274 @72c MSI twinfrozr III 2GB | ||
6950 | 388.4 | - | - | 900 | 1536 | - | PCI-E 2.1 x16 | guiminer/poclbm | Powercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1. | ||
6950 | 403 | - | - | 939 | 685 | - | PCI-E 2.1 x16 | phoenix-1.50/phatk | ASUS EAH6950 ((Ref. 6950 Flashed -> 6970)) / +10% overdrive volt., Fan @ 90%, VECTORS BFI_INT WORKSIZE=128 AGGRESSION=13. Overclocked from 880 -> 939 with MSI Aferburner | ||
6950 | 410.4 | - | - | 950 | 1536 | - | PCI-E 2.1 x16 | guiminer/poclbm | Powercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1. | ||
6950 | 418.8 | - | - | 940 | 1536 | - | PCI-E 2.1 x16 | guiminer/poclbm | Gigabyte OC 1GB, shadermod, voltage locked 1.175, mem 450, -w128 -v -f0, ATI Tray Tool | ||
6950 | 432.4 | - | - | 1000 | 1536 | - | PCI-E 2.1 x16 | guiminer/poclbm | Powercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1. | ||
6950 | 454.4 | - | - | 1050 | 1536 | - | PCI-E 2.1 x16 | guiminer/poclbm | Powercolor 6950 @ shadermod on original Bios 6950 / 1000mV 850/730, +20% powertune, Fan @ 60%, -v -w128 -f1. | ||
6950 | 417 | 2.085(?) | 200(?) | 975 | 1536 | 2.4.595.0 | PCI-E 2.1 x16 | guiminer/poclbm | unlocked shaders, +20% overdrive, mem @ 1250, fan @ 77%, temp 64C, -v -w128, gpu core @ 1145mV | ||
6950 | 428 | 2.14(?) | 200(?) | 1000 | 1536 | 2.4.595.0 | PCI-E 2.1 x16 | guiminer/poclbm | unlocked shaders, +20% overdrive, mem @ 1250, fan @ 80%, temp 64C, -v -w128, gpu core @ 1160mV | ||
6950 | 440 | 990 | 1536 | 2.4 | PCI-E 2.1 x16 | guiminer/phatk | unlocked shaders, mem @ 1375, VGPU 1.21v, Watercooled (MCW60), temp 54C, VECTORS BFI_INT AGGRESSION=11 -k phatk | ||||
6950 | 432 | 2.16(?) | 1.44 | 200(?) | 1000 | 1536 | 2.4.595.0 | PCI-E 2.1 x16 | guiminer/poclbm | unlocked shaders, +20% overdrive, mem @ 520, fan @ 80%, temp 76C, -v -w128 -f 2, gpu core @ 1275mV | |
6950x2 CF | 720 | - | - | ~400 | 900 | 1408 | 2.4.595.0 | PCI-E 2.1 x16 | GUIMiner v2011-07-01 | MSI Afterburner - gpu @ 900 (870 stock), mem @ 900 (1250 stock), temp 69-71C(bottom vga) fan@94% / 77-81C(top vga) fan@99% - 31C enviornment, -v -f 1 -w 128 BFI_INT | |
6950x2 CF | 731 | - | - | ~400 | 900 | 1408 | 2.4.595.0 | PCI-E 2.1 x16 | GUIMiner v2011-07-01 | MSI Afterburner - gpu @ 900 (870 stock), mem @ 900 (1250 stock), temp 68C(bottom vga) fan@90% / 73C(top vga) fan@99% - 28C enviornment, -v -f 1 -w 128 BFI_INT AGGRESSION=13 | |
6950x3 | 1081 | - | - | 860 | 1408 | 2.4(?) | PCI-E 2.1 x8 | guiminer/poclbm 07-01 | Sapphire 2GB stock bios, stock voltage, locked shaders: +20% overdrive, mem@650, fan@95%, temp 94C, -v -f0 -w128, 93c | ||
6950x4 | 1316 | 1.513 | 870 | 840 | 1408 | 2.4.595.0 | PCI-E 2.1 x16 | m0mchil/poclbm 03-07-11 | locked shaders, default mem 1250, dual fan 75C typical | ||
6970 | 323 | 1.468 | 0.92 | 220 | 880 | 1536 | 2.3 | PCI-E 2.1 x16 | poclbm | -w 64, SDK 2.1 not supported on 69xx. | |
6970 | 370 | - | - | 880 | 1536 | 2.4 | PCI-E 2.1 x16 | guiminer/poclbm | -v -w128, fan @ 50%/temp 72C, stock card | ||
6970 | 372 | 1.691(?) | 220(?) | 900 | 1536 | 2.4 | PCI-E 2.1 x16 | phoenix (svn trunk 05.14.2011) | clock 900/1375, VECTORS BFI_INT AGGRESSION=11 WORKSIZE=128, fan 45% (auto) / temp 90C | ||
6970 | 388 | - | - | 900 | 1536 | 2.4 | PCI-E 2.1 x16 | guiminer/poclbm | -v -w128, fan @ 50%/temp 72C, stock voltage of 1.175v | ||
6970 | 385 | 1.964 | 196 | 900 | 1536 | 2.4 | PCI-E 2.1 x16 | guiminer/poclbm | -v -w128, memory downclocked to 684Mhz, fan @ 70%/temp 81C | ||
6970 | 380 | - | - | - | - | 2.4 | PCI-E 2.1 x16 | poclbm | -v -w128 export GPU_USE_SYNC_OBJECTS=1 # to reduce poclbm CPU from 100% to 2% | ||
6970 | 403 | - | - | MAX | 1536 | 2.4 | PCI-E 2.1 x16 | guiminer/poclbm | clock Max/50%+stock, -v -w128, fan= 100%/temp 72C (Note: Overclocked using CCC utility under Windows 7, Clock set to Max value w/ 50% increase to memory and 5% increase to voltage) | ||
6970 | 406 | - | - | 950 | 1536 | 2.4 | PCI-E 2.1 x16 | phoenix 1.50/phatk | GPU Overclocked to Max (950MHz) using aticonfig, Memory Underclocked using AMDOverdriveCtrl (850MHz). Temp ~ 82C. VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 WORKSIZE=128 | ||
6970 | 407 | - | - | 955 | 1536 | 2.4 | PCI-E 2.1 x16 | poclbm | -v -w128, fan 75%/temp 75C, voltage +10% | ||
6970 | 414 | - | - | 960 | 1536 | 2.4 | PCI-E 2.1 x16 | guiminer/poclbm | -v -w128, fan @ 53%/temp 73C, stock voltage of 1.175v, high air flow case | ||
6970 | 420 | - | - | 975 | 1536 | 2.4 | PCI-E 2.1 x16 | guiminer/poclbm | -v -w128 -f0, clocks 975MHz/685MHz MSI Lightning | ||
6970 | 423 | - | 1.20 | - | 995 | - | 2.4 | PCI-E 2.1 x16 | phoenix 1.48/poclbm | ATI Tray Tools, Clocks=995/331.25, WORKSIZE=128 BFI_INT AGGRESSION=11 VECTORS ,68C @ 65% Fan, HAF932 Case | |
6970x2 | 710 | - | - | 900/880 | 1536 | 2.2 | PCI-E 2.1 x16 | poclbm | -w 256 | ||
6970x2 | 828 | - | - | 940 | 1536 | 2.4 | PCI-E 2.1 x16 | poclbm | -v -w128, fans 74%/82%, temp 74C/82C, powertune +20% (via CCC), memory underclock 825MHz (via MSI Afterburner), with 'Maj' fix | ||
6990 | 670 | 1.94 | 0.89 | 346 | 830 | 3072 | 2.4 | PCI-E 2.1 x16 | poclbm | Catalyst 11.4 source. | |
6990 | 704 | 830 | 3072 | 2.4 | PCI-E 2.1 x16 | Diablo Win7 64bits | Catalyst 11.4, Arguments: -v 2 -w 128 (by Swapper 2011-07-07) | ||||
6990 | 708 | 2.05 | 346 | 830 | 3072 | 2.3 | PCI-E 2.1 x16 | mrb's hdminer | BIOS switch at "default" position 2, see source | ||
6990 | 744 | 830 | 3072 | 2.5 | PCI-E 2.1 x16 | Diablo Win7 64bits | Catalyst 11.6b, Arguments: -v 2 -w 128 (by Swapper 2011-07-14) | ||||
6990 | 746 | 1.82 | 410 | 880 | 3072 | 2.3 | PCI-E 2.1 x16 | mrb's hdminer | BIOS switch at "overclocked" position 1, see source | ||
6990 | 758 | - | - | 880 | - | 2.4 | - | Phoenix with Poclbm | Catalyst 11.4, OC switch ON, VECTORS AGGRESSION=12 BFI_INT WORKSIZE=128 FASTLOOP=false | ||
6990 | 771 | 1.8804 | 410 | 880 | 3072 | 2.3 | PCI-E 2.1 x16 | mrb's hdminer | SDK 2.1 not supported on 69xx. Memory clock @ 1280Mhz. | ||
6990 | 772 | 1.8380 | 420 | 900 | 3072 | 2.3 | PCI-E 2.1 x16 | Phoenix & Poclbm | OC switch ON + overclocked to 900 mhz, VECTORS AGGRESSION=12 BFI_INT WORKSIZE=128 | ||
6990 | 790 | - | - | 900 | 3072 | 2.3 | PCI-E 2.1 x16 | mrb's hdminer | BIOS switch at "overclocked" position 1; with "aticonfig --odsc=900,1260" to further overclock the GPU to 900 MHz and mem to 1260 MHz, see source | ||
6990 | 795 | - | - | - | - | 2.4 | Diablo's miner | BIOS switch at "overclocked" position 1; On Windows Vista, Clocks set at 955,1250. Power control at 20.
Diablo's args: -w 128 -g 5 -v 2 -f 0 | |||
6990 | 802 | - | - | 915 | 3072 | 2.3 | PCI-E 2.1 x16 | mrb's hdminer | BIOS switch at "overclocked" position 1; with "aticonfig --odsc=915,1260" to further overclock the GPU to 915 MHz and mem to 1260 MHz, see source | ||
6990 | 835 | - | 1.11 | - | 890/860 | 3072 | 2.4 | PCI-E 2.1 x16 | phoenix | BIOS switch at "overclocked" position 1; with "aticonfig --adapter=1 --odsc=990,890 and aticonfig --adapter=0 --odsc=960,860" (GPU 0 runs hot). Currently, aticonfig can only underclock RAM to 100mhz below core speed. Command line: phoenix.py -k poclbm VECTORS AGGRESSION=13 WORKSIZE=128 BFI_INT | |
6990x2 | 1436 | 1.848 | 777 | 880 | 6144 | 2.4 | PCI-E 2.0 x16 x2 | guiminer 2011.05.11 | AUSUM switch set to 1 on both cards; Core left at 880MHz, memory left at 1250MHz; VECTORS AGGRESSION=12 BFI_INT WORKSIZE=128 | ||
6990x2 | 1700 | 1.416 | 1200 | 1010 | 3072 | 2.1 | PCI-E 2.0 x16 x16 | guiminer 2011.06.14 | GPU 1010MHz, Memory 900MHz; VECTORS AGGRESSION=12 BFI_INT WORKSIZE=128 FASTLOOP=false | ||
6990x3 | 2094 | - | - | 900 | - | 2.4 | PCI-E 2.0 x16 x8 x4 | poclbm | GPU 900MHz, Memory 1250MHz; poclbm.py -f 0 -w 256 | ||
5870x4 | 1758 | 1.90 | 960 | - | 2.1 | PCI-E 2.0 x1 | phoenix 1.50 + phatk + Improvement | Cards are clocked with BIOS flash @ 960Mhz Core and 300Mhz Memory. More information and pictures: http://forum.bitcoin.org/index.php?topic=7216.msg324521#msg324521 | |||
5870 | 437 | 1.90 | 960 | - | 2.1 | PCI-E 2.0 x1 | phoenix 1.50 + phatk | Card is clocked with BIOS flash @ 960Mhz Core and 300Mhz Memory. More information and pictures: http://forum.bitcoin.org/index.php?topic=7216.msg324521#msg324521 | |||
FirePro V4800 | 79.7 | - | - | 775 | 400 | 2.4 | PCI-E 2.1 x16 | GUIMiner v2011-05-01 | |||
FirePro V8700 | 84.8 | - | - | 750 | 800 | - | - | poclbm-mod.03.24.2011 | |||
FirePro M5800 | 61.4 | - | - | 650 | - | - | - | poclbm-mod.03.24.2011 | Ubuntu | ||
FirePro M5800 | 69.3 | - | - | 650 | 400 | 2.1 | - | GUIMiner v2011-04-26 | -v -w128, Windows 7 32bit | ||
FirePro V5800 | 119 | - | - | 690 | 800 | - | PCI-E 2.0 x16 | GUIMiner v2011-05-01 | Windows 7 32bit | ||
FirePro V5800 | 144 | - | - | 690 | 800 | - | PCI-E 2.0 x16 | GUIMiner v2011-05-01 | -v -w128 (Windows 7 32bit) | ||
FirePro V5800 | 161 | - | - | 780 | 800 | - | PCI-E 2.0 x16 | GUIMiner v2011-05-01 | -v -w128 (Windows 7 32bit) | ||
FirePro V7750 | 35.7 | - | - | - | - | 2.4 | PCI-E 2.0 x16 | GUIMiner v2011-05-21 | Windows 7 64bit | ||
FirePro V7800 | 254.85 | - | - | - | - | 2.4 | PCI-E 2.0 x16 | Phoenix 1.48 with poclbm | Debian Squeeze | ||
FirePro M7740 (M97 GL) [DELL] | 63.0 | - | - | 650 | - | 2.1 | PCIe v2.0 x16 | GUIMiner v2011-06-14 | Windows 7 64bit / only SDK2.1 works | ||
FirePro M7820 | 150.0 | - | - | 700 | 800 | 2.1 | PCI-E 2.1 x16 | GUIMiner v2011-06-09 / poclbm | Memory downclocked to 500 from 1000MHz, 169MH/s@800MHz, 181MH/s@860Mhz (max.), only SDK2.1 works, Windows 7 x86 |
- ↑ $ Prices from http://www.amazon.com on 2011-06-25
Nvidia
Model | Mhash/s | Mhash/J | Watts | Clock | SP | Comment |
---|---|---|---|---|---|---|
ION | 1.8 | 0.067 | 27 | 16 | poclbm; power consumption incl. CPU | |
8200 mGPU | 1.2 | 1200 | 16 | 128 MB shared memory, "poclbm -w 128 -f 0" | ||
8400 GS | 2.3 | "poclbm -w 128" | ||||
8400 GS | 1.6 | 0.013 | 128 | 1238 | DiabloMiner -w 128 -f 1 source | |
8400M GS | 2.0 | |||||
8500GT | 2.4 | 918 | 16 | poclbm under GUIMiner | ||
8600M GT | 4.93 | 32 | ||||
8600M GT | 3.8 | Macbook Pro running Diablo | ||||
8600GT | 5.66 | 1188 | 32 | |||
8600GT OC | 7.3 | 1602 | 32 | poclbm -w 128 source | ||
8800GT | 25 | 0.24 | 105 | 1300 | ||
8800GT | 24.5 | 0.23 | 105 | 1300 | source | |
8800GT | 31.1 | 0.296 | 105 | 1855 | Overclocked 715 GPU / 1030 Memory / 1855 Shader; GuiMiner v2011-05-21 | |
8800GT | 31.8 | 0.303 | 105 | 1836 | 112 | 713 gpu, 1026 memory. win7x86, phoenix 1.48, -k poclbm WORKSIZE=64 AGGRESSION=5 |
8800GT | 34.0 | 105 | 1998 | gpu 756M, mem 1123M, shader 1998M, temp 65C. winXP, phoenix 1.50, -k poclbm WORKSIZE=64 AGGRESSION=6 -- same settings get 32.7 MH/s with aggression 2 | ||
8800GTS | 16.8 | 0.109 | 154 | source source | ||
8800 GTS | 18.7 | 0.124 | 150 | 1200 | poclbm -w 64 no vectors | |
8800 GTS | 33.5 | 150 | OC | CUDA mining via GUIminer. Win7 64bit. poclbm -v -w128 -f0. OC'd Core@799MHz, Mem@1080MHz, Shader@1905MHz. Fan 70%, GPU temp @ 66C in comfortable room temp. | ||
8800 GTX | 27.5 | 1404 | phoenix 1.48, poclbm, no vectors, 83C with 50C ambient | |||
8800m GTX | 16.3 | rpcminer-cuda Win7-64 | ||||
9300GE | 1.57 | 1300 | 8 | |||
9300GS | 1.69 | 1400 | 8 | |||
9300/nForce 730i | 2.15 | 1200 | 16 | |||
9400GT | 3.37 | 0.067 | 50 | 1400 | 16 | |
9400M (MacBook) | 1.90 | 0.32 | 6 | 700 | poclbm -f 8 no vectors | |
9500GT | 6.75 | 0.135 | 50 | 1400 | 32 | |
9500GT | 7.10 | 0.135 | 50 | 1767 | 32 | rpcminer-cuda, Overclocked 707 GPU / 500 Memory / fan 100% 73C steady |
9600GSO | 19.88 | 0.237 | 84 | 1375 | 96 | |
9600GSO512 | 11.75 | 0.131 | 90 | 1625 | 48 | |
9600GT | 15.66 | 0.165 | 95 | 1625 | 64 | |
9600GT Zotac | 15 | 1650 | 64 | |||
9600GT OC | 18.8 | <0.198 | >95 | 1981 | 64 | poclbm -w 128 -f 10 source source |
9600M GS | 4.0 | 1075 | 32 | rpcminer-cuda | ||
9800GT | 30.36 | 0.289 | 105 | 1800 | 112 | |
9800GT EE | 19.7 | 0.263 | 75 | 1375 | 112 | rpcminer-cuda |
9800GT OC | 29.5 | 0.283 | 105 | 1836 | 112 | poclbm.py, no options. Memory underclocked to 850Mhz, GPU overclocked to 733Mhz |
9800GTX | 32.54 | 0.232 | 140 | 1688 | 128 | |
9800GTX+ | 32.6 | 0.232 | 140 | 1688 | 128 | win7x64 275.33 Overclocked to 756/1890/1102 using a CUDA-specific miner (instead of phoenix, yay for ZERO stales!) |
9800GTX+ | 35.39 | 0.251 | 141 | 1836 | 128 | |
9800GTX+ | 36 | factory OC ubuntu polclbm.py -w 128 -f 10 -a 10 (DO NOT USE -v) | ||||
9800GTX+ | 37.23 | 0.266 | 140 | 1890 | 128 | win7x64 275.27 phoenix(1.48) -k poclbm AGGRESSION=3 WORKSIZE=64 (may cause 75%+ stale count, in which case use a CUDA-specific miner instead) |
9800GTX+ | 40.20 | 0.287 | 140 | 835 | 128 | lowered memory clock higher core, unstable if going higher |
9800GX2 | 57.83 | 0.294 | 197 | 2x128 | ||
9800GX2 | 28 | 0.142 | 197 | 2x128 | source | |
G210 | 3.38 | 0.111 | 30.5 | 1402 | 16 | |
G210 | 3.79 | 0.124 | 30.5 | 1402 | 16 | poclbm -f 1 |
GT220 | 10.8 | 0.084 | 128 | 1360 | DiabloMiner -w 128 -f 1000 source | |
GT230 | 15.5 | 0.161 | 96 | 650 | 64 | (9600GT rebranded one from in a medion pc) |
GT240 | 19.37 | 0.281 | 69 | 1340 | 96 | |
GT240 | 21.24 | 96 | poclbm-mod -f 0 -v source | |||
GT240 | 28.1 | 96 | poclbm -f0 -v (Gainward GT240 1024DDR5 OC core@670/stockmem@1700/shader@1700 - stable; max.temp=73) | |||
GT240M | 9.8 | 0.426 | 23 | 550 | 48 | poclbm -f 0 -w 256 |
GTS250 | 35.39 | 0.244 | 145 | 1836 | 128 | |
GTS250 | 35.2 | 0.243 | 145 | 1836 | 128 | |
GTS250 OC | 37 | 0.255 | 145 | 2047 | 128 | |
GTX260M | 22.5 | 500 | 112 | poclbm 4/28/2011 Asus G71GX runs ~90c without cooling pad | ||
GTX260 | 35.91 | 0.178 | 202 | 1242 | 192 | |
GTX260 | 44 | 0.242 | 182 | 1242 | 216 | source |
GTX260c216 | 40.40 | 0.236 | 171 | 1242 | 216 | |
GTX260c216 | 47.4 | 0.260 | 182 | 1348 | 216 | poclbm -w 256 |
GTX260c216 | 50.00 | 1050 | 216 | m0mchil GPU client, Windows 7 64-bit, x6 @ 3.5ghz | ||
GTX260c216 OC | 52.0 | 1461 | 216 | "poclbm -w 256 -f 1" | ||
GTX260c216 OC | 58.9 | 756/400 | 216 | Core overclocked, Memory underclocked, Ubuntu 11.04 Classic Session(No Effects) "poclbm -w 256 -f 1" | ||
GTX260c216 OC | 60.1 | 1706 | 216 | Core: 364 MHz, Shaders: 1706 MHz, Memory: 594 MHz, VDDC: 1.1800V. "poclbm-mod -w 256 -f 1" | ||
GTX275 | 50.75 | 0.232 | 219 | 1404 | 240 | |
GTX275 | 58 | 729/1458 | 240 | poclbm -f 0 -w 256 | ||
GTX280 | 46.84 | 0.198 | 236 | 1296 | 240 | |
GTX280 | 64.34 | 0.289 | 245 | 1296 | 240 | phoenix.exe -k poclbm AGGRESSION=6 WORKSIZE=128 (61*C with Accelero XTREME GTX280) |
GTX285 | 64.8 | 1607 | 240 | GuiMiner - Not sure about wattage yet. Still testing. Card runs around 74 C | ||
GTX285 | 53.35 | 0.262 | 204 | 1476 | 240 | |
GTX295 | 89.78 | 0.311 | 289 | 1242 | 480 | |
GTX295 | 120.70 | 0.418 | 289 | 1242 | 480 | GUIMiner no oc. |
GTX295 | 117.30 | 0.406 | 289 | 1476 | 490 | |
GT 320M (MacBook Air) | 6.12 | 1212 | 48 | |||
320M (Mac mini 2010) | 7.0 | 0.35 | 20 | 450 | 32 | poclbm no extra options, windows 7 x64 |
GT 325M | 7.5 | 990 | 48 | rpcminer-cuda | ||
GT 325M | 10.5 | 325/650(mem)/1300(shaders) | rpcminer-cuda, 71 degrees | |||
GT 325M | 7.99 | poclbm -f 0 -w 256 | ||||
GT330 | 21.65 | poclbm -f 0 -w 256 | ||||
GT 330M | 7.97 | Model: MacBookPro6,2 VRAM: 512MB Software: DiabloMiner GUI v2011-05-22 / Mac OS X 10.6.7 | ||||
GT 330M (Sony Vaio Z) | 7.8 | 0.71 ( 0.3 total) | 11 (26w total) | 1045 | 48 | |
GTS 350M (Toshiba A665-3DV) | 17.0 | 1.214 | 14 | 1080 | DiabloMiner-Windows.exe | |
GTS 360M | 25.0 | [toshiba qosmio laptop, ~150-165*F stock fans] | ||||
GTS 360M (ASUS G60jx) | 20.0 | everythins is stock, it cannot sustain. it reaches 90 degrees and freezes. | ||||
GT430 | 20.24 | 0.413 | 49 | 1400 | 96 | |
GT540M | 16.0 | rpcminer-cuda | ||||
GT550M | 17.08 | rpcminer-cuda -aggression=8 | ||||
GTS450 | 45.28 | 0.427 | 106 | 1566 | 192 | |
GTX460SE | 56.39 | 0.376 | 150 | 1300 | 288 | |
GTX460 | 66.32 | 814 | 336 | rpcminer-cuda 20110605, Graphics Clock @ 814MHz, Memory @ 1555MHz | ||
GTX460 | 68.31 | 0.427 | 160 | 1350 | 336 | |
GTX460 768MB | 57.8 | ? | 1350 | 336 | rpcminer-cuda -gputhreads=320 -gpugrid=336 | |
GTX460 768MB (MSI Cyclone 768D5/OC) | 75.1 | ? | 930 | 336 | rpcminer-cuda on Win7 x64 with ForceWare 275.33. MSI Afterburner set to core: 930MHz, shader: 1850MHz, core voltage: 1.087V, memory: 1600MHz. Runs at 58°C with fan at 75% (ambient 25°C). | |
GTX460 1GB DirectCU | 72.3 | ? | ? | 1672 | 336 | rpcminer-cuda -gputhreads=320 -gpugrid=336 |
GTX460 (2 cards) | 102 | 0.319? | 320? | 1350 | source | |
GTX460 (2 cards) OC | 127 | 0.374 | 340 | 1620 | 2x 336 | rpcminer-cuda -gpugrid=128 -gputhreads=128 ver.20110227 |
GTX465 | 64.41 | 0.322 | 200 | 1215 | 352 | |
GTX470 | 81.98 | 0.381 | 215 | 1215 | 448 | |
GTX470 | 94.7 | 1414 | ||||
GTX470 | 111.9 | 0.520 | 215 | 1650 | 448 | |
GTX470 | 115 | 1616 | phoenix 1.46 poclbm VECTORS BFI_INT FASTLOOP AGGRESSION=6 | |||
GTX480 | 101.28 | 0.405 | 250 | 1401 | 480 | |
GTX480 | 140.43 | 1700 | 480 | rpcminer-cuda -gpugrid=512 -gputhreads=480 | ||
GTX480 AMP!Zotac | 140.1 | 1700 | 480 | rpcminer-cuda -gpugrid=480 -gputhreads=480 (vCore-1050,Core Clock-851, Shader Clock-1702, Memory Clock-2033, t-79°c, Water 43°c, stable temperature and work) | ||
GTX560 Ti | 67.7 | 0.39 | 170 | 1700 | 384 | standard EVGA 560, no overclock |
GTX560 Ti | 74.8 | 0.41 | 180 | 1700 | 384 | gigabyte 900Mhz clock; -w 512 -v |
GTX560 OC | 86.7 | <0.51 | >170 | 1800 | 384 | rpcminer-cuda source |
GTX570 | 105.83 | 0.483 | 219 | 1464 | 480 | |
GTX570 | 140 | 0.639 | 219 | 750 | 480 | rpcminer-cuda.exe -aggression=10 -gpugrid=480 -gputhreads=960; display driver stops working with aggression=11 under win7 x64 driver 270.61 |
GTX570 | 157 | 0.717 | 219 | 850 | 480 | rpcminer-cuda.exe -aggression=11 -gpugrid=120 -gputhreads=960 |
GTX580 | 140.05 | 0.574 | 244 | 1544 | 512 | |
GTX590 | 193.1 | --- | --- | 1215 | 2x 512 | poclbm -v -w 256, Win |
GTX590 | 2x 121.48 | --- | --- | 750 | 2x 512 | |
Quadro FX 580 | 5.7 | 0.14 | 40 | 1125 | 4 | rpcminer-cuda, Win, -gpugrid=128 -gputhreads=512 |
Quadro FX 770M | 5.75 | 500 | 32 | DiabloMiner-Windows.exe BFI_INT FASTLOOP AGGRESSION=6, Win | ||
Quadro FX 770M | 6.39 | 500 | 32 | DiabloMiner-Windows.exe BFI_INT FASTLOOP AGGRESSION=6 w 64, Win 7x64 | ||
Quadro FX 880M | 9.6 | poclbm/guiminer | ||||
Quadro FX 1600M | 6 | 0.12 | 50 | 625 | 32 | rpcminer-cuda, Win |
Quadro FX 2000M | 23 | 0.397 | 58 | phoenix 1.48, -k poclbm, VECTORS, AGGRESION=6, Lenovo W520 platform | ||
Quadro FX 2800M | 22 | 0.293 | 75 | 600 | 96 | DiabloMiner, win |
Quadro FX 3600M | 36 | 0.514 | 70 | 500 | 96 | |
Quadro NVS 135M | 1.05 | 0.1 | 10 | 800 | 1 | |
Quadro NVS 295 | 1.7 | 0.07 | 23 | 567 | 8 | phoenix |
Quadro NVS 3100M | 3.6 | 0.257 | 14 | 600 | 16 | rpcminer-cuda, Win, CUDA 3.1.1 |
Quadro 5000 | 67.7 | 0.445 | 152 | 513 | 352 | rpcminer-cuda.exe -aggression=7 gpugrid=352 gputhreads=704; |
Tesla C1060 | 52.5 | 1296 | 240 | poclbm, Win7x64 | ||
Tesla M2050 | 79.8 | 1550 | 448 | DiabloMiner | ||
Tesla S1070 | 155.2 | rpcminer-cuda, Linux, CUDA 3.2, 4 instances (-gpu=0 through -gpu=3) | ||||
GTX280x2 | 102.7 |
CPUs/APUs
A lot of nice data can be pulled from this thread to seed this section.
Might you wish to throttle CPU load a bit, so it doesn't reach 100°C, it can be done with Battle Encoder Shirase to a margin, like, -15% of available CPU cycles.
Often, the best combination to be is to throttle CPU miner to -5% AND set it to least of priority levels, so as not to choke GPU miner up.
AMD
Model | nprocs | Mhash/s | Mhash/J | TDP [W] | CPU Clock | Mhash/s CPU | Mhash/s GPU | GPU | GPU Clock | SP | Software | Notes | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
4x Opteron 6174 | 48 | 115 | 0.36 | 320W | 2.2 GHz | 2.4 | cpuminer v0.8.1 | --alg 4way --threads 48 | |||||
2x Opteron 6128 | 16 | 32.4 | 0.141 | 230W | 2 GHz | 32.4 | 0.3.19 | -4way | |||||
Athlon XP 2000+ | 2 | 0.62 | 0.009 | 70W | 1.67 GHz | 0.62 | 0.3.18/Ubuntu | source source | |||||
Athlon 64 3500+ | 1 | 1.18 | 0.013 | 89W | 2.54 GHz | 1.18 | ufasoft v0.4 | overclocked (originally 2.2 GHz) | |||||
Athlon 64 X2 3800+ | 2 | 1.73 | 0.03 | 65 W | 2.00 GHz | 1.73 | cpuminer (v0.8.1-1-g69529c3) | -algo=4way | |||||
Athlon 64 X2 4000+ | 2 | 1.9 | 0.02 | 65W | 2.1 GHz | 1.9 | rpc-miner | ||||||
Athlon 64 X2 4400+ | 2.09 | 0.032 | 65W | 2.3GHz | 2.09 | 0.3.19/Win x64 | source | ||||||
Athlon 64 X2 6000+ | 2 | 2.81 | 0.02 | 125W | 3 GHz | 2.81 | source | ||||||
Athlon 64 X2 6400+ Black Edition | 2 | 2.9 | 0.023 | 125W | 3.2 GHz | 2.9 | 0.3.20.2 BETA/Win 7 x64 | -4way | |||||
Athlon II X2 240e | 2 | 2.71 | 0.06 | 45W | 2.81 GHz | 2.71 | bitcoind | source | |||||
Athlon II X2 250 | 2 | 5.6 | 0.09 | 65W | 3.01GHz | 5.6 | bitcoin-miner 0.11 | ||||||
Athlon II X4 630 | 4 | 10.7 | 0.11 | 95W | 2.8 GHz | 10.7 | bitcoin-miner 0.4 | ||||||
Opteron 8220 x16 | 16 | 25 | 2.8Ghz | 1.5 | ufasoft / OpenSuse 64bit | running default, but had to copy 32bit binaries over to get curl and ufasoft running. might be better when using native 32bit system w/o other users on the machine | |||||||
Phenom II X3 720 | 3 | 3.8 | 0.04 | 95W | 2.8 GHz | 3.8 | 0.3.1x/WinXP | source | |||||
Phenom X4 9950 BE | 4 | 9.3 | 0.07 | 126W | 2.6 GHz | 2.32 | bitcoin-miner 0.13/WinXP | No GPU | |||||
Phenom II X3 720 | 3 | 7.2 | 0.08 | 95W | 2.8 GHz | 7.2 | cpu-miner 0.2.1/WinXP | source | |||||
Phenom II X4 810 | 4 | 5.0 | 95W | 2.8 GHz | rpcminer-cpu | ||||||||
Phenom II X4 810 | 4 | 9.5 | 95W | 2.8 GHz | rpcminer-4way | ||||||||
Phenom II X4 810 | 4 | 10.5 | 95W | 2.8 GHz | ufasoft v0.10 | ||||||||
Phenom II X4 810 | 4 | 11.5 | 95W | 2.8 GHz | cgminer 1.5.3 | "cgminer 1.5.3 --algo 4way" on Ubuntu 11.10 alpha 2 (64 bit), built by GCC 4.6.1 with "-O3 -Wall -march=native" | |||||||
Phenom II X4 955 | 4 | 11 | 0.09 | 125W | 3.2 GHz | 11 | rpcminer-4way | ||||||
Phenom II X4 965 | 4 | 12 | 0.09 | 140W | 3.4 GHz | 11 | rpcminer-4way | ||||||
Phenom II X6 1055T | 6 | 15.84 | 0.13 | 125W | 2.82 GHz | 15.84 | bitcoind | source | |||||
Phenom II X6 1075T | 6 | 21.3 | 125W | minerd | Ubuntu 11.04 amd64 runlevel=1 -algo=4way -threads=6 | ||||||||
Phenom II X6 1090T | 6 | 18 | 141W | 3.50 GHz | 3 | minerd | |||||||
Phenom II X6 1100T | 6 | 22 | 0.176 | 125W | 3.82 GHz | 22 | bitcoin-miner | Aciid#bitcoin-dev | |||||
Sempron 3000+ | 2 | 0.8 | 62W | 1.6 GHz | 0.8 | cpuminer | --alg 4way | ||||||
Turion X2 RM-70 | 2 | 1.9 | 65W | 2.1 GHz | 1.9 | cpuminer | --alg 4way | ||||||
Zacate E-350 | 2 | 11 | 0.615 | 18W | 1.6 Ghz | 1.231 | 9.831 | HD6310M | 492 Mhz | 80 | poclbm -v -w128 + Ufasoft 0.7 | stock speeds | |
Zacate E-350 | 2 | 12 | 1.648 Ghz | 1.252 | 10.87 | HD6310M | 492 Mhz | 80 | poclbm -v -w 256 -f 1 | "autotune" speed with ASUS EFI BIOS | |||
Ontario C-50 | 2 | 6.2 | 0.68 | 9W | 1.0 Ghz | 1.200 | 6.2 | HD6250M | 277 Mhz | 80 | poclbm -v -w128 -f5 -r5 |
ARM
Model | p/t | Mhash/s | Mhash/J | Mhash/$ /€ | ACP [W] | Clock | Version | Comment |
---|---|---|---|---|---|---|---|---|
ARM1136EJ-S | 1 | 0.11 | ? | ? | ? | 0.528 GHz | cpuminer git | T-Mobile Pulse, inside Debian chroot, 'c' algo |
Cortex-A8 | 1 | 0.125 | 0.36 | <0.01 | 0.35 W | 0.6 GHz | cpuminer git (2011-03-26) | Nokia N900: 'cryptopp' |
Cortex-A8 | 1 | 0.2 | 0.57 | <0.01 | 0.35 W | 0.6 GHz | cpuminer git (2011-03-26) | Nokia N900: 'c' algo |
2x Cortex-A9 | 2 | 0.57 | 1.14 | <0.01 | 0.5 W | 1.0 GHz | cpuminer git (2011-03-24) | Toshiba AC100, ubuntu, 'c' algo |
Marvel Feroceon (88FR131) | 1 | 0.195 | 0.224 | <0.01 | 0.87 W | 1.2 GHz | cpuminer git (2011-06-15) | Marvell SheevaPlug, Debian, 'c' algo |
Intel
Model | p/t | Mhash/s | Mhash/J | Mhash / $[1]/€[2] | ACP [W] | Clock [GHz] | Version | Comment |
---|---|---|---|---|---|---|---|---|
Pentium III mobile ? | 1 | 0.3 | 0.014 | 21 | 1.07 | 0.3.1x/Win2K | source source | |
Pentium M 1.6ghz | 1 | .4 | 1.6 | minerd (jgarzik's 1.0) | cryppto, Windows 7 | |||
Pentium M 1.73ghz | 1 | .5 | 1.73 | minerd (jgarzik's 1.0) | cryppto, Windows 7 | |||
Old Xeon 512k (Dual) | 2x1/2 | 2.0 | 3.0 | cpuminer (v0.8.1-1-g69529c3) | HT disabled, algo=4way (twice as fast as the 2nd best algo) | |||
Pentium 4 2.0A | 1 | 0.85 | 2.0 | ufasoft-0.4/WinXP | -g no -t 2 | |||
Pentium Dual-Core E2180 | 2/2 | 1.75 | 2.0 | rpcminer-cpu | Win7-64 | |||
Pentium Dual-Core E2180 | 2/2 | 4.1 | 2.0 | cpuminer | sse2_64 | |||
Pentium Dual-Core E2180 | 2/2 | 4.5 | 2.0 | ufasoft v0.11 | Win7-64 | |||
Pentium Dual-Core E5400 | 2/2 | 2.27 | 0.03 | 65 | 2.7 | bitcoind | source | |
Celeron E330 | 2/2 | 2.2 | 0.03 | 65 | 2.5 | 0.3.19/Ubuntu10.04 | source | |
Celeron E3400 | 2/2 | 5.9 | - | - | - | 2.6 | Ufasoft v0.13 / GUIMiner v2011-06-14 | WinXP 32 bit, SSE2, Flags "-g no" |
Core 2 Quad Q6600 | 4/4 | 11.0 | 0.02/0.06 | 105 | 2.40 | bitcoin-miner 0.10 | -a 60 -g no -t 4 | |
Core 2 Quad Q8200 | 4/4 | 10.9 | 0.06/0.10 | 2.33 | Ufasoft 0.14 | -g no -l yes -t 4 | ||
Core 2 Quad Q9400 | 4/4 | 11 | 0.046 | 0.06/0.07 | 95 | 2.66 | bitcoin-miner 0.10 | -a 60 -g no -t 4 |
Core 2 Quad Q9650 | 4/4 | 18.67 | 0.05/0.06 | 95 | 4.00 | bitcoin-miner 0.10 | -a 60 -g no -t 4 | |
Core i3 530 | 2/4 | 8.31 | 0.10 | 0.06/0.10 | 80 | 3.66 | Ufasoft 0.7 | -v -a5 -g no -t 4 |
Core i3 M350 | 2/4 | 1.48 | 0.04 | 35 | 2.27 | bitcoind | source | |
Core i5 M450 | 2/4 | 1.8 | 0.05 | 35 | 1.2 | 0.3.17/Win7-54 | source | |
Core i5-650 | 2/4 | 5.1 | 0.04 ? | 0.02/0.03 | 3.2 | cpuminer-0.7 | -4way | |
Core i5-750 | 4/4 | 14 | 0.06/0.10 | 3.2 | bitcoin-miner 0.11 | -a 5 -g no -t 4 | ||
Core i5 ? | 4/? | 6.5 | client from svn | source | ||||
Core i5-2400 | 4/4 | 4.5 | 0.05 | 0.02/0.03 | 95 | 3.1 | cpuminer git (2011-01-22) | cryptopp_asm32 |
Core i5-2400 | 4/4 | 14 | 0.15 | 0.07/0.09 | 95 | 3.1 | cpuminer git (2011-03-26) | sse2_64 |
Core i5 2500K | 4/4 | 20.6 | 0.10/0.12 | 4.2 | bitcoin-miner | -g no | ||
Core i5 2600K | 4/8 | 17.3 | 75 | 3.4 | bitcoin-miner | -g no. 75W for the whole System without monitor (MSI Board). CPU underclocked to 3,4Ghz and undervolted to 1,012Vcore. Passive Cooling! 3.6ghz results in 18,4 Mhash/s | ||
Core i7 620M | 2/4 | 1.888 | 2.66 | RPCMiner GUI v2011-05-22 / Mac OS X 10.6.7 | Model: MacBookPro6,2 RAM: 4GB | |||
Core i7 720QM | 4/8 | 7.9 | ? | 45 | 2.8 | ufasoft | stream processors overclocked from 1.6 GHz; Dell Precision M6500, Win7-64, 8GB DDR3 | |
Core i7 820 | 4/8 | 13.8 | 2.8 | ufasoft | -t 8 | |||
Core i7 920 | 4/8 | 19.2 | 0.10 | 195 | 4.0 (x21) | ufasoft | -a 5 | |
Core i7 950 | 4/8 | 5.88 | 0.039 | 150 | 3.83 (x23) | bitcoin-0.3.20.2 Win7-64 | ||
Core i7 950 | 4/8 | 18.9 | 0.126 | 150 | 3.83 (x23) | ufasoft v0.4 | ||
Core i7 980x | 6/12 | 19.2 | 0.15 | 130 | 4.4 (x33) | cpuminer/Win7-64 | ||
Core i7 980x | 6/12 | 8.7 | 3.9 (x27) | 0.3.17/Win7-64 | ||||
Core i7 990x | 6/12 | 33.3 | 4.5 (x32) | ufasoft/Win2008 R2-64 | Ram - 12Gb, Rampage III BlackEdition, Water cooling | |||
Core i7 2635QM | 4/8 | 2.93 | 2.00 | RPCMiner GUI v2011-05-22 / Mac OS X 10.6.7 | Model: MacBookPro8,2 RAM: 4GB | |||
Core i7 620M | 2/4 | 6.3 | 0.18 | 35 | 2.66 | ufasoft v0.4 | ||
Core i7 2600k | 4/4 | 6.7 | 4.00 | phoenix 0.48 | ||||
Core 2 Duo U7600 | 1 | 1.1 | 1.2 | minerd (jgarzik's 1.0) | cryppto, Windows 7 | |||
Core 2 Duo E5200 | 2/2 | 6.2 | 0.086 | 72 | 2.76 | Ufasoft/Win7-64 | TDP is 65W + 7W overclock | |
Core 2 Duo E6550 | 1/2 | 2.45 | 2.33 | cpuminer 0.7.1 (Linux) | --algo=sse2_64 | |||
Core 2 Duo E6850 | 2/2 | 6.75 | 0.10 | 65 | 3.0 | ufasoft-0.3 | ||
Core 2 Duo E7300 | 2/2 | 7.76 | 0.11 | 70 | 3.33 | ufasoft-0.3 | uncertain of overclock; miner optimized for Intel Core | |
Core 2 Duo E7300 | 2/2 | 2.52 | 0.04 | 65 | 2.66 | bitcoind | source | |
Core 2 Duo E8200 | 2/2 | 2.3 | 0.035 | 65 | 2.66 | rpcminer-cpu | ||
Core 2 Duo E8400 | 2/2 | 6.9 | 0.106 | 65 | 3.0 | ufasoft v0.10 | windows 7/64bit (-t 2) | |
Core 2 Duo E8500 | 1/2 | 3.6 | 3.16 | guiminer v2011-06-14 | windows vista 32bit | |||
Core 2 Duo E8500 | 2/2 | 7.2 | 3.16 | guiminer v2011-06-14 | windows vista 32bit | |||
Core 2 Duo T5450 | 2/2 | 2.5 | 0.07 | 35 | 1.63 | bitcoin-miner 0.10 | Ubuntu 11.04 | |
Core 2 Duo T6400 | 2/2 | 4.2 | 0.12 | 35 | 2.00 | cpuminer git (Linux) | --algo=sse2_64 | |
Core 2 Duo T7250 | 2/2 | 4.5 | 0.13 | 35 | 2.00 | bitcoin-miner 0.13/WinXP | No GPU | |
Core 2 Duo T7450 | 2/2 | 3.7 | 0.10 | 35 | 2.13 | bitcoin-miner 0.10 | Ubuntu 11.04 | |
Core 2 Duo T9400 | 2/2 | 4.2 | 2.53 | ufasoft v0.13 | Win7-64 | |||
Core 2 Extreme X9000 | 2/2 | 2.37 | 2.8 | rpcminer-cpu | Win7-64 | |||
Core 2 Extreme X9000 | 2/2 | 6.2 | 2.8 | ufasoft v0.11 | Win7-64 | |||
Core 2 Extreme X9000 | 2/2 | 7.2 | 3.2 | ufasoft v0.11 | Win7-64 Overclocked from 2.8 GHz to 3.2 GHz | |||
Xeon 2.8 | 2/2 | 0.8 | 2.8 | cpuminer | cryptopp_asm32 | |||
Xeon 3060 | 1/2 | 2.03 | 0.03 | 65 | 2. | cpuminer 0.8.1 (Linux) | --algo=cryptopp_asm32 | |
Xeon Prestonia 2.4 (dual) | 2x1/2 | 2.16 | 0.017 | 130 | 2.4 | ufasoft v0.4 | ||
Xeon X5355 (dual) | 2x4/4 | 10.13 | 0.16 | 120 | 2.6 | bitcoind | Roughly the same speed as the "c" algo in cpuminer | |
Xeon X5355 (dual) | 2x4/4 | 22.76 | 0.09 | 120 | 2.6 | cpuminer (v0.8.1-1-g69529c3) | -O2 -march=core2, algo=sse2_64 | |
Xeon X5365 (dual) | 2x4/4 | 26.00 | ? | ? | 3.0 | cpuminer git (2011-06-15) | algo=sse2_64 | |
Xeon X5650 | 2x6/24 | 28.6 | ? | ? | ? | 2.67 | cpuminer 1.0.2 | --algo 4way |
Xeon E5335 | 4/4 | 9.35 | 0.12 | 80 | 2.00 | ufasoft v0.11 | Vista-32 | |
Xeon E5410 | 4/4 | 9.8 | ? | 80 | 2.33 | ufasoft v0.10 | CentOS 5.5 x64 | |
Xeon E5440 | 4/8 | 7.3 | ? | 80 | 2.66 | Kiv's poclbm-gui | FIXME: Either wrong model # or wrong threads/speed info | |
Xeon E5506 | 4/4 | 9.6 | ? | 80 | 2.13 | ufasoft v0.10 | CentOS 5.5 x64 | |
Xeon E5520 | 4/8 | 6.5 | 0.08 | 80 | 2.27 | bitcoind | source | |
Xeon E5530 | 4/8 | 7.14 | 0.09 | 80 | 2.4 | bitcoind | source | |
Xeon E5620 | 4/8 | 11.2 | ? | 80 | 2.4 | ufasoft v0.10 -t 4 | CentOS 5.5 x64 Hyper-Threading is off | |
Xeon E5630 (dual) | 2x4/8 | 8 | 0.1 | 80 | 2.53 | 0.3.17/Win7-64 | source | |
Xeon E6520 (dual) | 2x4/8 | 24.7 | 2.53 | ufasoft v0.10 | windows 2008 R2 64bit (-t 16) | |||
Xeon E7220 | 2/2 | 6.3 | ? | 80 | 2.93 | ufasoft v0.10 | CentOS 5.5 x64 | |
Xeon E7320 (dual) | 2x2 | 1.5 | 2.8 | cgminer v1.2.8 | 2x2.8ghz dual core running Ubuntu 11.04 x86 (individual cores get 0.4 MH/s) | |||
Xeon E7450 (quad) | 4x6/24 | 60 | 2.40 | ufasoft v0.13 | -t 24 | |||
Xeon E7520 (dual) | 2x4/16 | 18 | 95 | 1.87 | ufasoft v0.10 | windows 2008 R2 64bit (-t 16) | ||
Xeon W3680 | 6/12 | 18 | 130 | 3.33 | cpuminer v1.0.2 --algo=4way | Ubuntu 11.04 64bit | ||
Atom Z520 | 1/2 | 1.20 | 2 | 1.7 | ufasoft 1.18 | Asus Eee 1101HA with overclocking capabilities | ||
Atom N230 | 1/2 | 0.375 | 4 | 1.6 | rpcminer-cpu | |||
Atom N230 | 1/2 | 0.245 | 4 | 1.6 | rpcminer-4way | |||
Atom N230 | 1/2 | 0.97 | 4 | 1.6 | ufasoft v0.10 | |||
Atom N270 | 1/2 | 1.19 | 0.24 | 5 | 1.6 | ufasoft v0.10 | ||
Atom 330 | 2/4 | 1.80 | 8 | 1.6 | ufasoft v0.13 | -t 4 | ||
Atom D510 | 2/4 | 1.00 | 1.6 | cpuminer w cryptopp_asm32 | debian linux 6.0, headless system, 2 GB RAM, running from usb-flash | |||
Atom D510 | 4/4 | 2.3 | 0.07 | 30 | 1.6 | bitcoin-miner 0.10 | Ubuntu 11.04 Server |
- ↑ $ Prices from http://www.amazon.com on 2011-06-25
- ↑ € Prices from http://geizhals.at/eu on 2011-06-25
Other
Model | p/t | Mhash/s | Mhash/J | Mhash/$ | ACP [W] | Clock | Version | Comment |
---|---|---|---|---|---|---|---|---|
Cell | 6 | 21 | 0.35 | 0.07 | 60W | 3.2 GHz | Cellminer | Sony Playstation 3 (FAT): Needs custom firmware. source source Total power usage of PS3 fat is 120W but only the Cell cpu is active. |
Cell | 7 | 26.6 | ? | ? | 60W | 3.2 GHz | Cellminer | Sony Playstation 3 (FAT): Needs custom firmware. source source Running with 7th spu enabled and both ppe cores. |
Cell | 6 | 21 | 0.7 | 0.07 | 35W | 3.2 GHz | cellminer | Sony Playstation 3 (SLIM): Total power usage of PS3 slim is 70W but only the Cell cpu is active. |
ARM | 1 | 0.187 | ? | ? | ? | 1200 MHz | cpuminer | Seagate Dockstar ArchLinux |
MIPS | 1 | 0.026 | ? | ? | ? | 200 MHz | cpuminer | ASUS WL-500G Deluxe Router Running OpenWrt |
VIA Eden | 1 | 1.3 | 0.17 | 8W | 1600 MHz | cpuminer | VIA Eden w/ padlock | |
PowerPC 7447A | 1 | 0.53 | 1420 MHz | cpuminer | ||||
PowerPC 750 (G3) | 1 | 0.140 | 600 MHz | cpuminer | iBook G3 600 w/ Cryptopp |
FPGA Devices
FPGA Model | Cores | Mhash/s | Mhash/J | Mhash/$ | Power [W] | Board price | Clock | Version | Board | Comment |
---|---|---|---|---|---|---|---|---|---|---|
Altera EP4CE115C7 | 1 | 80 | 18.18 | 0.13 | 4.4 | $595 ($299 academic) [1] | 80 MHz | fpgaminer 0.03 | Terasic DE2-115 | Unoptimized Pipelined Version |
Altera EP4CE115C7 | 1 | 109 | 0.18 | $595 ($299 academic) [2] | 109 MHz | fpgaminer 0.03-makomk | Terasic DE2-115 | Makomk's Improvements | ||
Xilinx XC5VLX110T-1FF1136 | 1 | 120 | 0.06 | $1999 ($750 academic) [3] | 120 MHz | fpgaminer virtex5 | XUPV5-LX110T | Original non-configurable fully-unrolled Xilinx VHDL Design | ||
Xilinx XC3S500E-FG320-5 | 1 | 3.125 | 4.0 | 0.02 | 0.78 | $149 ($99 academic) [4] | 100 MHz | fpgaminer Verilog Xilinx port | Digilent Nexys 2 500K | |
Xilinx XC6SLX150T-3FGG676 | 1 | 100 | ~25 | ~4.0 | $995 [5] | 100 MHz | fpgaminer makomk Xilinx port | Avnet Spartan-6 LX150T Development Kit | -3N 484-pin chip is ~$150, 0.67Mhash/$ |
- ↑ price from http://www.terasic.com.tw/cgi-bin/page/archive.pl?No=502 on 2011-06-26
- ↑ Price from http://www.terasic.com.tw/cgi-bin/page/archive.pl?No=502 on 2011-06-26
- ↑ Price from http://www.digilentinc.com/Products/Detail.cfm?NavPath=2,400,795&Prod=XUPV5 on 2011-06-26
- ↑ Price from http://www.digilentinc.com/Products/Detail.cfm?Prod=NEXYS2 on 2011-06-26
- ↑ Price from http://www.xilinx.com/products/boards-and-kits/AES-S6DEV-LX150T-G.htm on 2011-07-26