Mining hardware comparison: Difference between revisions
No edit summary |
No edit summary |
||
Line 434: | Line 434: | ||
==CPUs/APUs== | ==CPUs/APUs== | ||
A lot of nice data can be pulled from [http://www.bitcoin.org/smf/index.php?topic=1628.0 this thread] to seed this section | A lot of nice data can be pulled from [http://www.bitcoin.org/smf/index.php?topic=1628.0 this thread] to seed this section. | ||
Might you wish to throttle CPU load a bit, so it doesn't reach | Might you wish to throttle CPU load a bit, so it doesn't reach 100°C, it can be done with Battle Encoder Shirase to a margin, like, -15% of available CPU cycles. | ||
Often, the best combination to be is to throttle CPU miner to -5% '''AND''' set it to least of priority levels, so as not to choke GPU miner up. | |||
===AMD=== | ===AMD=== |
Revision as of 15:08, 30 May 2011
Below are some statistics about the mining performance of various hardware used in a mining rig.
The table shows (mostly) stock clock numbers. 10-20% performance improvement can be achieved via overclocking.
Note: Clock refers to the Shader clock only with nVidia cards (not Core or Memory). With AMD card the shader clock is not separate, but is part of the GPU clock.
Graphics cards
AMD
To get the maximum performance use the 2.1 release of the ATI Stream SDK. 2.2 wastes CPU time, and 2.3/2.4 drop mining performance by 5-10%.
Model | Mhash/s | Mhash/J | W | Clock | SP | SDK | Slot | Miner | Notes | |
---|---|---|---|---|---|---|---|---|---|---|
3XXX | OpenCL Not Supported | |||||||||
42XX | PCI-E 2.0 x16 | OpenCL Not Supported (intergrated/mobile GPU) | ||||||||
4350 | 6.93 | 0.346 | 20 | 575 | 80 | PCI-E 2.0 x16 | poclbm | -w 32, don't use vectors | ||
4550 | 7.23 | 0.289 | 25 | 600 | 80 | PCI-E 2.0 x16 | poclbm | -w 32, don't use vectors | ||
4570M | 8.02 | 0.297 | 27 | 680 | 80 | PCI-E 2.0 x16 | Diablo/Windows7 | -w 64, SDK 2.4, Cat 11.4. Model: Sony Vaio NW | ||
4570M | 9.6 | 0.300 | 32 | 825 | 80 | PCI-E 2.0 x16 | Diablo/Windows7 | -w 64, SDK 2.4, Cat 11.4. Model: Sony Vaio NW. O/C core 680->825. U/C memory 800->500. | ||
4650 | 31.33 | 0.653 | 48 | 650 | 320 | PCI-E 2.0 x16 | poclbm | -w 32, don't use vectors | ||
4670 | 36.14 | 0.613 | 59 | 750 | 320 | PCI-E 2.0 x16 | poclbm | -w 32, don't use vectors | ||
4670 | 40.11 | 59 | 800 | 320 | AGP x8 | poclbm/Ubuntu 10.10 w/ H == 0 mod | -w 32 -f 0, don't use vectors source | |||
4730 | 72.29 | 0.657 | 110 | 750 | 640 | PCI-E 2.0 x16 | ||||
4770 | 72.29 | 0.904 | 80 | 750 | 640 | PCI-E 2.0 x16 | ||||
4830 | 55.42 | 0.583 | 95 | 575 | 640 | PCI-E 2.0 x16 | ||||
4850 | 75.30 | 0.685 | 110 | 625 | 800 | PCI-E 2.0 x16 | ||||
4850 | 101 | 817 | 500 | 2.1 | PCI-E 2.0 x16 | guiminer | -f 0, core 817mhz(default 625)@1.123v , mem downclock to 500mhz (default 993) source | |||
4860 | 67.47 | 0.519 | 130 | 700 | 640 | PCI-E 2.0 x16 | ||||
4870 | 90.36 | 0.602 | 150 | 750 | 800 | 2.1 | PCI-E 2.0 x16 | clmine | ||
4870 | 78 | PCI-E 2.0 x16 | m0mchil's OpenCL/Vista 64bit | source | ||||||
4890 | 102.41 | 0.539 | 190 | 850 | 800 | PCI-E 2.0 x16 | ||||
4890 | 108.3 | 190 | 975 | 800 | PCI-E 2.0 x16 | |||||
4850X2 | 150.60 | 0.602 | 250 | 625 | 1600 | PCI-E 2.0 x16 | ||||
4870X2 | 180.72 | 0.632 | 286 | 750 | 1600 | PCI-E 2.0 x16 | ||||
4870X2 | 180.6 | 286 | 800 | 1600 | PCI-E 2.0 x16 | |||||
5450 | 11.99 | 0.631 | 19 | 650 | 80 | PCI-E 2.1 x16 | ||||
5550 | 40.59 | 1.041 | 39 | 550 | 320 | PCI-E 2.1 x16 | ||||
5570 | 59.96 | 1.538 | 39 | 650 | 400 | PCI-E 2.1 x16 | ||||
5570 | 64 | 1.641 | 39 | 650 | PCI-E 2.1 x16 | m0mchil's OpenCL/WinXP | source | |||
5570 | 62 | 1.59 | 39 | 650 | 800 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.48 OpenCL/Linux x86_64 | -k phatk DEVICE=0 VECTORS AGGRESSION=4 -v FASTLOOP BFI_INT WORKSIZE=64 | |
5570 | 73 | 39 | 700 | 800 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.48 OpenCL/Linux x86_64 | -k phatk DEVICE=0 VECTORS AGGRESSION=4 -v FASTLOOP BFI_INT WORKSIZE=64 | ||
5650 | 48 | 1.37 | 35 ? | PCI-E 2.1 x16 | m0mchil's OpenCL/Win7-64 | source source -- not TDP but load | ||||
5670 | 71.49 | 1.117 | 64 | 775 | 400 | PCI-E 2.1 x16 | ||||
5670 | 72 | 1.64 | 44 | 850 | PCI-E 2.0 x16 | poclbm-mod (Win7-64) | Sapphire 100287VGAL card is low power | |||
5670 | 85 | 900 | 400 | PCI-E 2.1 x16 | poclbm | -v -f 0 -w 128 | ||||
5750 | 116.24 | 1.352 | 86 | 700 | 720 | PCI-E 2.1 x16 | ||||
5750 | 137 | 710 | PCI-E 1.1 x16 | poclbm | -v -f 0 -w 128 using stock memory and GPU clocks | |||||
5750 | 154.56 | 1.45 | 106 | 830 | 720 | PCI-E 2.1 x16 | -v -w128 -f20 underclocked memory clocks from 1150MHz to 300MHz | |||
5750 | 170 | 870 | PCI-E 1.1 x16 | poclbm | -v -f 0 -w 128 patched BIOS to underclock memory to 300MHz | |||||
5750 | 173 | 875 | PCI-E 1.1 x16 | phoenix | 875/300 w/MSI Afterburner, BFI_INT VECTORS AGGRESSION=12 FASTLOOP=FALSE -k phatk | |||||
5770 | 156.83 | 1.452 | 108 | 850 | 800 | 2.1 | PCI-E 2.1 x16 | clmine | ||
5770 | 180 | 1.406 | 128[*] | 950 | 800 | 2.4RC1 | PCI-E 2.1 x16 | poclbm | -v -w 128 -f 30 (*Overclocked wattage calculated here ) | |
5770 | 205.58 | 935 | 300 | 2.1 | PCI-E 2.1 x16 | poclbm 2011-04-28 | -v -w 256 | |||
5770 | 223 | 100+ | 1050 | 300 | 2.4 | PCI-E 2.1 x16 | guiminer | -v -w256 source | ||
5830 | 206.64 | 1.181 | 175 | 800 | 1120 | PCI-E 2.1 x16 | ||||
5830 | 241 | 1.377 | 175 | 1006 | 2.3 | PCI-E 2.1 x16 | poclbm 2011-03-11 / Win7 64 | |||
5830 | 245 | 1.4 | 175 | 880 | 900 | 2.4 | PCI-E 2.1 x16 | poclbm (guiminer) | -v -w 256 | |
5830 | 248 | 1.42 | 175 | 880 | 500 | 2.4 | PCI-E 2.1 x16 | phoenix 1.46 | -k poclbm VECTORS BFI_INT AGGRESSION=11 | |
5830 | 285 | 960 | 2.4 | PCI-E 2.1 x16 | phoenix 1.47 / poclbm / Win7 64 | VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 | ||||
5830 | 290 | 996 | 2.4 | PCI-E 2.1 x16 | phoenix 1.4 / poclbm / Win7 64 | VECTORS AGGRESSION=12 BFI_INT | ||||
5830 | 307 | 996 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 / phatk / Win7 64 | VECTORS AGGRESSION=12 BFI_INT | ||||
5850 | 240.77 | 1.595 | 151 | 725 | 1440 | PCI-E 2.1 x16 | ||||
5850 | 250.26 | 1.657 | 151 | 725 | 1440 | PCI-E 2.1 x16 | opencl client | source | ||
5850 | 252 | 1.575 | 160 | 765 | 1440 | 2.3 | PCI-E 2.1 x16 | poclbm 2011-01-25 | ||
5850 | 255.3 | 1.593 | 160 | 765 | 1440 | 2.2 | PCI-E 2.1 x16 | poclbm 2011-01-25 | ||
5850 | 264 | 1.748 | 151 | 725 | 1440 | 2.4 | PCI-E 1.0 x8 | guiminer-20110501 | -v -w128 | |
5850 | 280 | 1.75 | 160 | 765 | 1440 | 2.2 | PCI-E 2.1 x16 | Phoenix 1.3 | with BFI_INT | |
5850 | 292 | 1.825 | 160 | 765 | 1440 | 2.1 | PCI-E 2.1 x16 | poclbm 2011-04-28 -v -f 1 | ||
5850 | 298 | 1.8620 | 160 | 765 | 1440 | 2.1 | PCI-E 2.1 x16 | poclbm 2011-04-28 -v -f 1 -w 64 | ||
5850 | 300 | 1.5460 | 194 | 925 (OC) | 1440 | PCI-E 2.1 x16 | m0mchil's OpenCL | source | ||
5850 | 314 | 1.8362 | 171 | 820 (OC) | 1440 | 2.4 | PCI-E 1.0 x8 | poclbm | -v -w128 | |
5850 | 335 | 1.8611 | 180 | 890 (OC) | 1440 | 2.4 | PCI-E 2.0 x8 | poclbm | -v -w128, Memory downclocked to 300Mhz | |
5850 | 344 | 1.8594 | 185 | 890 (OC) | 1440 | PCI-E 2.0 x16 | phoenix | |||
5850 | 382 | 1.8454 | 207 | 995 (OC) | 1440 | PCI-E 2.0 x8 | phoenix | OC 1.177v on core | ||
5870M | 116.5 | ? | ? | ? | ? | 2.1 | PCI-E 2.1 x16 | gui-miner (win-7) | ||
5870 | 313.65 | 1.668 | 188 | 850 | 1600 | 2.1 | PCI-E 2.1 x16 | clmine | ||
5870 | 313 | 1.665 | 188 | 900? | 1600 | 2.3 | PCI-E 2.1 x16 | Diablo/Linux | ||
5870 | 343 | 1.824 | 188 | 900? | 1600 | 2.1 | PCI-E 2.1 x16 | Diablo/Linux | ||
5870 | 355 | 1.888 | 188 | 900? | 1600 | 2.1 | PCI-E 2.1 x16 | poclbm/Linux | ||
5870 | 340 | 1.809 | 188 | 850 | 1600 | PCI-E 2.1 x16 | m0mchil's OpenCL | source | ||
5870 | 360 | 1.6822 | 214 | 970 | 700 | PCI-E 2.0 x16 | m0mchil's OpenCL w7-64 | -f 0 -v -w 128 source | ||
5870 | 377 | 2.008 | 188 | 850 | 1600 | PCI-E 2.0 x16 | hashkill-0.2.5 alpha | -D -G2 | ||
5870 | 408 | 1.8888 | 216 | 980 | 1600 | 2.1 | PCI-E 2.0 x16 | poclbm/Win7x64 | -f 20 -v -w 128, BIT_ALIGN, BFI_INT | |
5870 | 400 | 1.9047 | 210 | 950 | 1600 | 2.4 | PCI-E 2.0 x8 | Phoenix 1.3 | -k poclbm VECTORS AGGRESSION=7 FASTLOOP BFI_INT | |
5870 | 398 | 1.980 | 201 | 900 | 1600 | PCI-E 2.0 x16 | hashkill-0.2.5 alpha | -D -G2 (GPU OC to 900, memory downclocked to 900) | ||
5870 | 420 | 2.0000 | 210 | 950 | 1600 | 2.4 | PCI-E 2.0 x16 | Phoenix 1.48 | -k phatk VECTORS BFI_INT AGGRESSION=14 WORKSIZE=256 -- Memory Clock 300Mhz | |
5870 | 421 | 1.9581 | 215 | 975 | 1600 | 2.4 | PCI-E 2.0 x16 | Phoenix 1.47 | VECTORS BFI_INT AGGRESSION=13 -k phatk | |
5870 | 440 | 2.0000 | 220 | 995 | 1600 | 2.4 | PCI-E 2.0 x16 | Phoenix | ||
5870 | 438 | 1.9819 | 221 | 1000 (OC) | 1600 | 2.1 | PCI-E 2.0 x16 | poclbm/Linux | -v -w 64 -f 1 | |
5970 | 530 | 1.803 | 294 | 725 | 3200 | 2.4.595.10 | PCI-E 2.1 x16 | poclbm/201103.beta3/Windows | -v -w128 -f60 | |
5970 | 535.06 | 1.820 | 294 | 725 | 3200 | 2.1 | PCI-E 2.1 x16 | clmine | ||
5970 | 560 | 1.905 | 294 | 725 | 3200 | PCI-E 2.1 x16 | Diablo | |||
5970 | 565 | 1.922 | 294 | 725 | 3200 | 2.1 | PCI-E 2.1 x16 | clmine2 | ||
5970 | 604 | 2.054 | 294 | 725 | 3200 | 2.1 | PCI-E 2.1 x16 | clmine | ||
5970 | 645 | 1.875 | 344 | 850 | 3200 | 2.1 | PCI-E 2.1 x16 | m0mchil/poclbm 03-07-11 | -f1, Debian 6, fglrx-driver 10.9.3 | |
5970 | 740 | 2.1511 | 344 | 850 | 3200 | 2.1 | PCI-E 2.1 x16 | phoenix/1.3 | AGGRESSION=12 WORKSIZE=128 VECTORS BFI_INT, memory clock @ 300MHz | |
5970 | 755 | 2.2076 | 342 | 848 | 3200 | 2.1 | PCI-E 2.1 x16 | poclbm 28-04-11 | -f 1 -w 256 -v, Ubuntu 10.10, fglrx 11.4, memory clock @ 300MHz | |
5970 | 802 | 2.31 | 347 | 850 | 3200 | 2.4 | PCI-E 2.1 x16 | phoenix poclbm Ubuntu 11.04 | -q 6 -k AGGRESSION=19 WORKSIZE=128 BFI_INT VECTORS, fglrx 11.4, mem clock @ 1000MHz | |
5870x2 | 620 | 850 | 3200 | 2.1 | PCI-E 2.1 x16 | guiminer | -v -w 128 | |||
5870x2 | 826 | 1100 | 950 | 3200 | 2.1 | PCI-E 2.1 x16 | phoenix 1.4 w/ Phtak | AGGRESSION=13 WORKSIZE=128 VECTORS BFI_INT Memory @ 300MHz | ||
5870x2 | 826 | 700 | 935 | 3200 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 w/ Phatk | AGGRESSION=13 WORKSIZE=256 VECTORS BFI_INT FASTLOOP=false, memory @ 319 MHz, Windows 7 32-bit | ||
5870x2 | 878 | 1500 | 1000 | 3200 | 2.1 | PCI-E 2.1 x16 | phoenix 1.7 w/ Phtak | AGGRESSION=13 WORKSIZE=128 VECTORS BFI_INT Memory @ 300MHz | ||
6310M | 9.821 | 0.545 | 18 | 500 | 80 | 2.4 | Integrated/APU | poclbm-gui -v -w128 | HP DM1z 18W TDP is shared with the CPU | |
6470M | 24.1 | ? | ? | ? | ? | 2.1 | Integrated/APU | guiminer | ||
6470M | 31.0 | ? | ? | ? | ? | 2.1 | Integrated/APU | phoenix 1.48 | ||
6490M | 16.289 | 0.708 | 23 | PCI-E 2.1 x16 | poclbm-mod (Mac OS X 10.6.7) | MacBook Pro early 2011 | ||||
6490M | 15.21 | DiabloMiner GUI v2011-05-22 / Mac OS X 10.6.7 | Model: MacBookPro8,2 VRAM: 256MB | |||||||
6750 | 167.59 | 870 | PCI-E 2.1 x16 | guiminer | -v -f30 -w128 | |||||
6850 | 171.59 | 1.351 | 127 | 775 | 960 | 2.1 | PCI-E 2.1 x16 | clmine | ||
6850 | 196 | 850 | 960 | PCI-E 2.1 x16 | poclbm | -v -w 128 -f 0 | ||||
6850 | 234.8 | 940 | 960 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.3 | AGGRESSION=8 WORKSIZE=128 VECTORS BFI_INT | |||
6850 | 220 | 1.236 | 178[*] | 1000 | 960 | 2.4RC1 | PCI-E 2.1 x16 | poclbm | -v -w 128 -f 30 (*Overclocked wattage calculated here ) | |
6870 | 232.47 | 1.540 | 151 | 900 | 1120 | PCI-E 2.1 x16 | poclbm -v -w 128 | |||
6870 | 277.47 | 940 | 1120 | PCI-E 2.1 x16 | Phoenix 1.3 | AGGRESSION=8 WORKSIZE=128 VECTORS BFI_INT | ||||
6870 | 260.1 | 1.611 | 175 | 1001 | 1150 | 2.2 | PCI-E 2.1 x16 | poclbm-gui windows7x86 cat 11.3 | -v -w 128 -f 1 | |
6870 | 276 | 1.828 (?) | 151 (?) | 900 | 1120 | 2.4 | PCI-E 2.1 x16 | hashkill-0.2.5 alpha cat 11.4 sdk 2.4 | -G2 -D stock clocks, debian linux 64bit | |
6870 | 300.06 | 1.830 | 164 | 1020 | 1120 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.4 cat 11.4 | VECTORS BFI_INT AGGRESSION=8 fastloop mem clock 344 | |
6870 | 306 | 1.748 (?) | 175 (?) | 1000 | 1120 | 2.4 | PCI-E 2.1 x16 | hashkill-0.2.5 alpha cat 11.4 sdk 2.4 | -G2 -D overclocked to 1000, debian linux 64bit | |
6870 | 300 | 1.72 | 174 | 1038 | 1120 | 2.4 | PCI-E 2.1 x16 | poclbm windows7x86 cat 11.4 | -v -w128 -f1 mem clock 360, fan 100% temp 73C | |
6870 | 322 | 1.882 | 170 | 1050 | 1120 | 2.4 | PCI-E 2.1 x16 | phoenix 1.47 phatk 11.5 sdk 2.4 | BFI_INT VECTORS FASTLOOP=false AGGRESSION=12 WORKSIZE=256, mem clock @ 400MHz | |
6950 | 295 | 160 (?) | 810 | 1536 | 2.4.595.0 | PCI-E 2.1 x16 | m0mchil/poclbm 03-07-11 | unlocked shaders, default mem 1250 | ||
6950 | 314 | (?) | 800 | 1408 | 2.4.595.0 | PCI-E 2.1 x16 | guiminer/poclbm 05-01-11 | -v -f30 -w128 default mem 1250 Stock Sapphire 6950 1gb | ||
6950 | 325 | 200 (?) | 885 | 1536 | 2.4.595.0 | PCI-E 2.1 x16 | m0mchil/poclbm 03-07-11 | unlocked shaders, default mem 1250 | ||
6950 | 340 | (?) | 800 | 1536 | (?) | PCI-E 2.1 x16 | guiminer/poclbm 05-21-11 | -v -f30 -w128 default mem 1250,Sapphire 6950 1gb, unlocked shaders | ||
6950 | 360 | 200 (?) | 970 | 1536 | 2.4.595.0 | PCI-E 2.1 x16 | m0mchil/poclbm 03-07-11 | unlocked shaders, default mem 1250 | ||
6950 | 360 | (?) | 870 | 1375 | (?) | PCI-E 2.1 x16 | guiminer/poclbm | flashed with 6970 BIOS, -v -f30 -w128 | ||
6950 | 417 | +200? | 975 | 1536 | 2.4.595.0 | PCI-E 2.1 x16 | guiminer/poclbm | unlocked shaders, +20% overdrive, mem @ 1250, fan @ 77%, temp 64C, -v -w128, gpu core @ 1145mV | ||
6970 | 323 | 1.468 | 220 | 880 | 1536 | 2.3 | PCI-E 2.1 x16 | poclbm | -w 64, SDK 2.1 not supported on 69xx. | |
6970 | 372 | 220 (?) | 900 | 1536 | 2.4 | PCI-E 2.1 x16 | phoenix (svn trunk 05.14.2011) | clock 900/1375, VECTORS BFI_INT AGGRESSION=11 WORKSIZE=128, fan 45% (auto) / temp 90C | ||
6970 | 385 | 1.964 | 196 | 900 | 1536 | 2.4 | PCI-E 2.1 x16 | guiminer/poclbm | -v -w128, memory downclocked to 684Mhz, fan @ 70%/temp 81C | |
6970 | 403 | (?) | MAX | 1536 | 2.4 | PCI-E 2.1 x16 | guiminer/poclbm | clock Max/50%+stock, -v -w128, fan= 100%/temp 72C (Note: Overclocked using CCC utility under Windows 7, Clock set to Max value w/ 50% increase to memory and 5% increase to voltage) | ||
6990 | 670 | 1.94 | 346 | 830 | 3072 | 2.4 | PCI-E 2.1 x16 | poclbm | Catalyst 11.4 source. | |
6990 | 708 | 2.05 | 346 | 830 | 3072 | 2.3 | PCI-E 2.1 x16 | mrb's hdminer | BIOS switch at "default" position 2, see source | |
6990 | 746 | 1.82 | 410 | 880 | 3072 | 2.3 | PCI-E 2.1 x16 | mrb's hdminer | BIOS switch at "overclocked" position 1, see source | |
6990 | 758 | 880 | 2.4 | Phoenix with Poclbm | Catalyst 11.4, OC switch ON, VECTORS AGGRESSION=12 BFI_INT WORKSIZE=128 FASTLOOP=false | |||||
6990 | 771 | 1.8804 | 410 | 880 | 3072 | 2.3 | PCI-E 2.1 x16 | mrb's hdminer | SDK 2.1 not supported on 69xx. Memory clock @ 1280Mhz. | |
6990 | 772 | 1.8380 | 420 | 900 | 3072 | 2.3 | PCI-E 2.1 x16 | Phoenix & Poclbm | OC switch ON + overclocked to 900 mhz, VECTORS AGGRESSION=12 BFI_INT WORKSIZE=128 | |
6990 | 790 | 900 | 3072 | 2.3 | PCI-E 2.1 x16 | mrb's hdminer | BIOS switch at "overclocked" position 1; with "aticonfig --odsc=900,1260" to further overclock the GPU to 900 MHz and mem to 1260 MHz, see source | |||
6990 | 802 | 915 | 3072 | 2.3 | PCI-E 2.1 x16 | mrb's hdminer | BIOS switch at "overclocked" position 1; with "aticonfig --odsc=915,1260" to further overclock the GPU to 915 MHz and mem to 1260 MHz, see source | |||
FirePro V4800 | 79.7 | 775 | 400 | 2.4 | PCI-E 2.1 x16 | GUIMiner v2011-05-01 | ||||
FirePro V8700 | 84.8 | 750 | 800 | poclbm-mod.03.24.2011 | ||||||
FirePro M5800 | 61.4 | 650 | poclbm-mod.03.24.2011 | Ubuntu |
Nvidia
Model | Mhash/s | Mhash/J | W | Clock | SP | Comment | |
---|---|---|---|---|---|---|---|
8200 mGPU | 1.2 | 1200 | 16 | 128 MB shared memory, "poclbm -w 128 -f 0" | |||
8400 GS | 2.3 | "poclbm -w 128" | |||||
8400 GS | 1.6 | 128 | 1238 | DiabloMiner -w 128 -f 1 source | |||
8600M GT | 4.93 | 32 | |||||
8600GT | 5.66 | 1188 | 32 | ||||
8600GT OC | 7.3 | 1602 | 32 | poclbm -w 128 source | |||
8800GT | 25 | 0.24 | 105 | 1300 | |||
8800GT | 24.5 | 0.23 | 105 | 1300 | source | ||
8800GT | 31.1 | 105 | 1855 | Overclocked 715 GPU / 1030 Memory / 1855 Shader; GuiMiner v2011-05-21 | |||
8800GTS | 16.8 | 0.109 | 154 | source source | |||
8800 GTS | 18.7 | 0.124 | 150 | 1200 | poclbm -w 64 no vectors | ||
8800m GTX | 16.3 | rpcminer-cuda Win7-64 | |||||
9300GE | 1.57 | 1300 | 8 | ||||
9300GS | 1.69 | 1400 | 8 | ||||
9300/nForce 730i | 2.15 | 1200 | 16 | ||||
9400GT | 3.37 | 0.067 | 50 | 1400 | 16 | ||
9400M (MacBook) | 1.90 | 0.32 | 6 | 700 | poclbm -f 8 no vectors | ||
9500GT | 6.75 | 0.135 | 50 | 1400 | 32 | ||
9600GSO | 19.88 | 0.237 | 84 | 1375 | 96 | ||
9600GSO512 | 11.75 | 0.131 | 90 | 1625 | 48 | ||
9600GT | 15.66 | 0.165 | 95 | 1625 | 64 | ||
9600GT Zotac | 15 | 1650 | 64 | ||||
9600GT OC | 18.8 | <0.198 | >95 | 1981 | 64 | poclbm -w 128 -f 10 source source | |
9800GT | 30.36 | 0.289 | 105 | 1800 | 112 | ||
9800GTX | 32.54 | 0.232 | 140 | 1688 | 128 | ||
9800GTX+ | 35.39 | 0.251 | 141 | 1836 | 128 | ||
9800GTX+ | 37.23 | 0.266 | 140 | 1890 | 128 | win7x64 275.27 phoenix(1.48) -k poclbm AGGRESSION=3 WORKSIZE=64 | |
9800GX2 | 57.83 | 0.294 | 197 | 2x128 | |||
9800GX2 | 28 | 0.142 | 197 | 2x128 | source | ||
G210 | 3.38 | 0.111 | 30.5 | 1402 | 16 | ||
G210 | 3.79 | 0.124 | 30.5 | 1402 | 16 | poclbm -f 1 | |
GT220 | 10.8 | 128 | 1360 | DiabloMiner -w 128 -f 1000 source | |||
GT240 | 19.37 | 0.281 | 69 | 1340 | 96 | ||
GT240 | 21.24 | 96 | poclbm-mod -f 0 -v source | ||||
GTS250 | 35.39 | 0.244 | 145 | 1836 | 128 | ||
GTS250 | 35.2 | 0.243 | 145 | 1836 | 128 | ||
GTS250 OC | 37 | 0.255 | 145 | 2047 | 128 | ||
GTX260 | 35.91 | 0.178 | 202 | 1242 | 192 | ||
GTX260 | 44 | 0.242 | 182 | 1242 | 216 | source | |
GTX260c216 | 40.40 | 0.236 | 171 | 1242 | 216 | ||
GTX260c216 | 50.00 | 1050 | 216 | m0mchil GPU client, Windows 7 64-bit, x6 @ 3.5ghz | |||
GTX260c216 OC | 52.0 | 1461 | 216 | "poclbm -w 256 -f 1" | |||
GTX260c216 OC | 58.9 | 756/400 | 216 | Core overclocked, Memory underclocked, Ubuntu 11.04 Classic Session(No Effects) "poclbm -w 256 -f 1" | |||
GTX275 | 50.75 | 0.232 | 219 | 1404 | 240 | ||
GTX275 | 58 | 729/1458 | 240 | poclbm -f 0 -w 256 | |||
GTX280 | 46.84 | 0.198 | 236 | 1296 | 240 | ||
GTX285 | 53.35 | 0.262 | 204 | 1476 | 240 | ||
GTX295 | 89.78 | 0.311 | 289 | 1242 | 480 | ||
GT 320M (MacBook Air) | 6.12 | 1212 | 48 | ||||
GT 330M | 7.97 | Model: MacBookPro6,2 VRAM: 512MB Software: DiabloMiner GUI v2011-05-22 / Mac OS X 10.6.7 | |||||
GT 330M (Sony Vaio Z) | 7.8 | 0.71 ( 0.3 total) | 11 (26w total) | 1045 | 48 | ||
GT430 | 20.24 | 0.413 | 49 | 1400 | 96 | ||
GTS450 | 45.28 | 0.427 | 106 | 1566 | 192 | ||
GTX460SE | 56.39 | 0.376 | 150 | 1300 | 288 | ||
GTX460 | 68.31 | 0.427 | 160 | 1350 | 336 | ||
GTX460 (2 cards) | 102 | 0.319? | 320? | 1350 | source | ||
GTX460 (2 cards) OC | 127 | 0.374 | 340 | 1620 | 2x 336 | rpcminer-cuda -gpugrid=128 -gputhreads=128 ver.20110227 | |
GTX465 | 64.41 | 0.322 | 200 | 1215 | 352 | ||
GTX470 | 81.98 | 0.381 | 215 | 1215 | 448 | ||
GTX470 | 94.7 | 1414 | |||||
GTX470 | 111.9 | 215 | 1650 | 448 | |||
GTX470 | 115 | 1616 | phoenix 1.46 poclbm VECTORS BFI_INT FASTLOOP AGGRESSION=6 | ||||
GTX480 | 101.28 | 0.405 | 250 | 1401 | 480 | ||
GTX560 Ti | 67.7 | 0.39 | 170 | 1700 | 384 | standard EVGA 560, no overclock | |
GTX560 Ti | 74.8 | 0.41 | 180 | 1700 | 384 | gigabyte 900Mhz clock; -w 512 -v | |
GTX560 OC | 86.7 | <0.51 | >170 | 1800 | 384 | rpcminer-cuda source | |
GTX570 | 105.83 | 0.483 | 219 | 1464 | 480 | ||
GTX580 | 140.05 | --- | 244 | 1544 | 512 | ||
Quadro FX 580 | 5.7 | 0.14 | 40 | 1125 | 4 | rpcminer-cuda, Win, -gpugrid=128 -gputhreads=512 | |
Quadro FX 770M | 5.75 | 500 | 32 | DiabloMiner-Windows.exe BFI_INT FASTLOOP AGGRESSION=6, Win | |||
Quadro FX 1600M | 6 | 0.12 | 50 | 625 | 32 | rpcminer-cuda, Win | |
Quadro NVS 135M | 1.05 | 0.1 | 10 | 800 | 1 | ||
Quadro NVS 3100M | 3.6 | 0.257 | 14 | 600 | 16 | rpcminer-cuda, Win, CUDA 3.1.1 | |
Tesla M2050 | 79.8 | DiabloMiner | |||||
Tesla M2050 | 100 | 0 | 0 | - | 512 | Amazon AWS CUDA RPC Miner & CUDA 2.0 |
CPUs/APUs
A lot of nice data can be pulled from this thread to seed this section.
Might you wish to throttle CPU load a bit, so it doesn't reach 100°C, it can be done with Battle Encoder Shirase to a margin, like, -15% of available CPU cycles.
Often, the best combination to be is to throttle CPU miner to -5% AND set it to least of priority levels, so as not to choke GPU miner up.
AMD
Model | nprocs | Mhash/s | Mhash/J | TDP [W] | CPU Clock | Mhash/s CPU | Mhash/s GPU | GPU | GPU Clock | SP | Software | Notes |
---|---|---|---|---|---|---|---|---|---|---|---|---|
4x Opteron 6174 | 48 | 115 | 0.36 | 320W | 2.2 GHz | 2.4 | cpuminer v0.8.1 | --alg 4way --threads 48 | ||||
2x Opteron 6128 | 16 | 32.4 | 0.141 | 230W | 2 GHz | 32.4 | 0.3.19 | -4way | ||||
Athlon XP 2000+ | 2 | 0.62 | 0.009 | 70W | 1.67 GHz | 0.62 | 0.3.18/Ubuntu | source source | ||||
Athlon 64 3500+ | 1 | 1.18 | 0.013 | 89W | 2.54 GHz | 1.18 | ufasoft v0.4 | overclocked (originally 2.2 GHz) | ||||
Athlon 64 X2 3800+ | 2 | 1.73 | 0.03 | 65 W | 2.00 GHz | 1.73 | cpuminer (v0.8.1-1-g69529c3) | -algo=4way | ||||
Athlon 64 X2 4000+ | 2 | 1.9 | 0.02 | 65W | 2.1 GHz | 1.9 | rpc-miner | |||||
Athlon 64 X2 4400+ | 2.09 | 0.032 | 65W | 2.3GHz | 2.09 | 0.3.19/Win x64 | source | |||||
Athlon 64 X2 6000+ | 2 | 2.81 | 0.02 | 125W | 3 GHz | 2.81 | source | |||||
Athlon 64 X2 6400+ Black Edition | 2 | 2.9 | 0.023 | 125W | 3.2 GHz | 2.9 | 0.3.20.2 BETA/Win 7 x64 | -4way | ||||
Athlon II X2 240e | 2 | 2.71 | 0.06 | 45W | 2.81 GHz | 2.71 | bitcoind | source | ||||
Athlon II X4 630 | 4 | 10.7 | 0.11 | 95W | 2.8 GHz | 10.7 | bitcoin-miner 0.4 | |||||
Phenom II X3 720 | 3 | 3.8 | 0.04 | 95W | 2.8 GHz | 3.8 | 0.3.1x/WinXP | source | ||||
Phenom II X3 720 | 3 | 7.2 | 0.08 | 95W | 2.8 GHz | 7.2 | cpu-miner 0.2.1/WinXP | source | ||||
Phenom II X4 955 | 4 | 11 | 0.09 | 125W | 3.2 GHz | 11 | rpcminer-4way | |||||
Phenom II X4 965 | 4 | 12 | 0.09 | 140W | 3.4 GHz | 11 | rpcminer-4way | |||||
Phenom II X6 1055T | 6 | 15.84 | 0.13 | 125W | 2.82 GHz | 15.84 | bitcoind | source | ||||
Phenom II X6 1090T | 6 | 18 | 141W | 3.50 GHz | 3 | minerd | ||||||
Phenom II X6 1100T | 6 | 22 | 0.176 | 125W | 3.82 GHz | 22 | bitcoin-miner | Aciid#bitcoin-dev | ||||
Zacate E-350 | 2 | 11 | 0.615 | 18W | 1.6 Ghz | 1.231 | 9.831 | HD6310M | 492 Mhz | 80 | poclbm -v -w128 + Ufasoft 0.7 | stock speeds |
Zacate E-350 | 2 | 12 | 1.648 Ghz | 1.252 | 10.87 | HD6310M | 492 Mhz | 80 | poclbm -v -w 256 -f 1 | "autotune" speed with ASUS EFI BIOS |
ARM
Model | p/t | Mhash/s | Mhash/J | ACP [W] | Clock | Version | Comment |
---|---|---|---|---|---|---|---|
ARM1136EJ-S | 1 | 0.11 | ? | ? | 0.528 GHz | cpuminer git | T-Mobile Pulse, inside Debian chroot, 'c' algo |
Cortex-A8 | 1 | 0.125 | 0.36 | 0.35 W | 0.6 GHz | cpuminer git (2011-03-26) | Nokia N900: 'cryptopp' |
Cortex-A8 | 1 | 0.2 | 0.57 | 0.35 W | 0.6 GHz | cpuminer git (2011-03-26) | Nokia N900: 'c' algo |
2x Cortex-A9 | 2 | 0.57 | 1.14 | 0.5 W | 1.0 GHz | cpuminer git (2011-03-24) | Toshiba AC100, ubuntu, 'c' algo |
Intel
Model | p/t | Mhash/s | Mhash/J | ACP [W] | Clock | Version | Comment |
---|---|---|---|---|---|---|---|
Pentium III mobile ? | 1 | 0.3 | 0.014 | 21W | 1.07 GHz | 0.3.1x/Win2K | source source |
Pentium M 1.6ghz | 1 | .4 | 1.6 GHZ | minerd (jgarzik's 1.0) | cryppto, Windows 7 | ||
Pentium M 1.73ghz | 1 | .5 | 1.73 GHZ | minerd (jgarzik's 1.0) | cryppto, Windows 7 | ||
Old Xeon 512k (Dual) | 2x1/2 | 2.0 | ? | ? | 3.06GHz | cpuminer (v0.8.1-1-g69529c3) | HT disabled, algo=4way (twice as fast as the 2nd best algo) |
Pentium 4 2.0A | 1 | 0.85 | 2.0 GHz | ufasoft-0.4/WinXP | -g no -t 2 | ||
Pentium Dual-Core E2180 | 2/2 | 1.75 | 2.0 GHz | rpcminer-cpu | Win7-64 | ||
Pentium Dual-Core E2180 | 2/2 | 4.5 | 2.0 GHz | ufasoft v0.11 | Win7-64 | ||
Pentium Dual-Core E5400 | 2/2 | 2.27 | 0.03 | 65W | 2.7 GHz | bitcoind | source |
Celeron E330 | 2/2 | 2.2 | 0.03 | 65W | 2.5 GHz | 0.3.19/Ubuntu10.04 | source |
Core 2 Quad Q6600 | 4/4 | 11.0 | 105W | 2.40 GHz | bitcoin-miner 0.10 | -a 60 -g no -t 4 | |
Core 2 Quad Q9400 | 4/4 | 11 | 0.046 | 95W | 2.66 GHz | bitcoin-miner 0.10 | -a 60 -g no -t 4 |
Core 2 Quad Q9650 | 4/4 | 18.67 | 95W | 4.00 GHz | bitcoin-miner 0.10 | -a 60 -g no -t 4 | |
Core i3 530 | 2/4 | 8.31 | 0.10 | 80W | 3.66 GHz | Ufasoft 0.7 | -v -a5 -g no -t 4 |
Core i3 M350 | 2/4 | 1.48 | 0.04 | 35W | 2.27 GHz | bitcoind | source |
Core i5 M450 | 2/4 | 1.8 | 0.05 | 35W | 1.2 GHz | 0.3.17/Win7-54 | source |
Core i5-650 | 2/4 | 5.1 | 0.04 ? | 3.2 GHz | cpuminer-0.7 | -4way | |
Core i5 ? | 4/? | 6.5 | client from svn | source | |||
Core i5-2400 | 4/4 | 4.5 | 0.05 | 95W | 3.1 GHz | cpuminer git (2011-01-22) | cryptopp_asm32 |
Core i5-2400 | 4/4 | 14 | 0.15 | 95W | 3.1 GHz | cpuminer git (2011-03-26) | sse2_64 |
Core i7 620M | 2/4 | 1.888 | 2.66 GHz | RPCMiner GUI v2011-05-22 / Mac OS X 10.6.7 | Model: MacBookPro6,2 RAM: 4GB | ||
Core i7 920 | 4/8 | 19.2 | 0.10 | 195 | 4.0 GHz (x21) | ufasoft | -a 5 |
Core i7 950 | 4/8 | 5.88 | 0.039 | 150W | 3.83 GHz (x23) | bitcoin-0.3.20.2 Win7-64 | |
Core i7 950 | 4/8 | 18.9 | 0.126 | 150W | 3.83 GHz (x23) | ufasoft v0.4 | |
Core i7 980x | 6/12 | 19.2 | 0.15 | 130 | 4.4 GHz (x33) | cpuminer/Win7-64 | |
Core i7 980x | 6/12 | 8.7 | 3.9 GHz (x27) | 0.3.17/Win7-64 | |||
Core i7 2635QM | 4/8 | 2.93 | 2.00 GHz | RPCMiner GUI v2011-05-22 / Mac OS X 10.6.7 | Model: MacBookPro8,2 RAM: 4GB | ||
Core i7 620M | 2/4 | 6.3 | 0.18 | 35 | 2.66 GHz | ufasoft v0.4 | |
Core 2 Duo U7600 | 1 | 1.1 | 1.2 GHZ | minerd (jgarzik's 1.0) | cryppto, Windows 7 | ||
Core 2 Duo E5200 | 2/2 | 6.2 | 0.086 | 72W | 2.76 Ghz | Ufasoft/Win7-64 | TDP is 65W + 7W overclock |
Core 2 Duo E6550 | 1/2 | 2.45 | ? | ? | 2.33 GHz | cpuminer 0.7.1 (Linux) | --algo=sse2_64 |
Core 2 Duo E6850 | 2/2 | 6.75 | 0.10 | 65W | 3.0 Ghz | ufasoft-0.3 | |
Core 2 Duo E7300 | 2/2 | 7.76 | 0.11 | 70W | 3.33 GHz (o/c?) | ufasoft-0.3 | miner optimized for Intel Core |
Core 2 Duo E7300 | 2/2 | 2.52 | 0.04 | 65W | 2.66 GHz | bitcoind | source |
Core 2 Duo E8400 | 2/2 | 6.9 | ? | ? | 3.0 GHz | ufasoft v0.10 | windows 7/64bit (-t 2) |
Core 2 Duo T6400 | 2/2 | 4.2 | 0.12 | 35 W | 2.00 GHz | cpuminer git (Linux) | --algo=sse2_64 |
Core 2 Extreme X9000 | 2/2 | 2.37 | 2.8 GHz | rpcminer-cpu | Win7-64 | ||
Core 2 Extreme X9000 | 2/2 | 6.2 | 2.8 GHz | ufasoft v0.11 | Win7-64 | ||
Core 2 Extreme X9000 | 2/2 | 7.2 | 3.2 GHz | ufasoft v0.11 | Win7-64 Overclocked from 2.8 GHz to 3.2 GHz | ||
Xeon 3060 | 1/2 | 2.03 | 0.03 | 65W | 2.4GHz | cpuminer 0.8.1 (Linux) | --algo=cryptopp_asm32 |
Xeon Prestonia 2.4 (dual) | 2x1/2 | 2.16 | 0.017 | 130W | 2.4 GHz | ufasoft v0.4 | |
Xeon X5355 (dual) | 2x4/4 | 10.13 | 0.16 | 120W | 2.66GHz | bitcoind | Roughly the same speed as the "c" algo in cpuminer |
Xeon X5355 (dual) | 2x4/4 | 22.76 | 0.09 | 120W | 2.66GHz | cpuminer (v0.8.1-1-g69529c3) | -O2 -march=core2, algo=sse2_64 |
Xeon E5440 | 4/8 | 7.3 | ? | 80W | 2.66 GHz | Kiv's poclbm-gui | FIXME: Either wrong model # or wrong threads/speed info |
Xeon E5520 | 4/8 | 6.5 | 0.08 | 80W | 2.27 GHz | bitcoind | source |
Xeon E5530 | 4/8 | 7.14 | 0.09 | 80W | 2.4 GHz | bitcoind | source |
Xeon E5630 (dual) | 2x4/8 | 8 | 0.1 | 80W | 2.53 GHz | 0.3.17/Win7-64 | source |
Xeon E6520 (dual) | 2x4/8 | 24.7 | ? | ? | 2.53 GHz | ufasoft v0.10 | windows 2008 R2 64bit (-t 16) |
Xeon E7520 (dual) | 2x4/16 | 18 | ? | 95W | 1.87 GHz | ufasoft v0.10 | windows 2008 R2 64bit (-t 16) |
Atom N270 | 2 | 1.19 | 0.24 | 5W | 1.6 GHz | ufasoft v0.10 |
Other
Model | p/t | Mhash/s | Mhash/J | ACP [W] | Clock | Version | Comment |
---|---|---|---|---|---|---|---|
Cell | 6 | 21 | 0.35 | 60W | 3.2 GHz | cellminer | Sony Playstation 3 (FAT): Needs custom firmware (no links to it, potential issues with Sony assholes.) source source Total power usage of PS3 fat is 120W but only the Cell cpu is active. |
Cell | 6 | 21 | 0.7 | 35W | 3.2 GHz | cellminer | Sony Playstation 3 (SLIM): Total power usage of PS3 slim is 70W but only the Cell cpu is active. |
MIPS | 1 | 0.026 | ? | ? | 200 MHz | cpuminer | ASUS WL-500G Deluxe router running OpenWrt |