Mining hardware comparison: Difference between revisions
Carburetor (talk | contribs) |
Carburetor (talk | contribs) |
||
Line 24: | Line 24: | ||
| 4350 || 6.93 || 0.346 || 20 || 575 || 80 || || PCI-E 2.0 x16 || poclbm || -w 32, don't use vectors | | 4350 || 6.93 || 0.346 || 20 || 575 || 80 || || PCI-E 2.0 x16 || poclbm || -w 32, don't use vectors | ||
|- | |- | ||
| 4350 || 8.14 || - || - || 730 || 80 || || PCI-E 2.0 x16 || Diablo/Windows7 || -w 32. Model: Asus EAH4350 Silent. Memory at 400MHz. Runs at 60°C with ambient at 25°C. | | 4350 || 8.14 || - || - || 730 || 80 || 2.4 || PCI-E 2.0 x16 || Diablo/Windows7 || -w 32. Model: Asus EAH4350 Silent. Memory at 400MHz. Runs at 60°C with ambient at 25°C. | ||
|- | |- | ||
| 4550 || 7.23 || 0.289 || 25 || 600 || 80 || || PCI-E 2.0 x16 || poclbm || -w 32, don't use vectors | | 4550 || 7.23 || 0.289 || 25 || 600 || 80 || || PCI-E 2.0 x16 || poclbm || -w 32, don't use vectors |
Revision as of 01:32, 13 June 2011
Below are some statistics about the mining performance of various hardware used in a mining rig.
The table shows (mostly) stock clock numbers. 10-20% performance improvement can be achieved via overclocking.
Note: Clock refers to the Shader clock only with nVidia cards (not Core or Memory). With AMD card the shader clock is not separate, but is part of the GPU clock.
W = Watt (maximum power consumption)
SP = Stream processors (Shader Units)
Graphics cards
AMD (ATI)
To get the maximum performance use the 2.1 release of the ATI Stream SDK. 2.2 wastes CPU time, and 2.3/2.4 drop mining performance by 5-10% unless using the Phoenix phatk kernel. Note: This statement is not entirely accurate. YMMV.
Model | Mhash/s | Mhash/J | W | Clock | SP | SDK | Slot | Miner | Notes |
---|---|---|---|---|---|---|---|---|---|
3XXX | OpenCL Not Supported | ||||||||
42XX | OpenCL Not Supported (intergrated/mobile GPU) | ||||||||
4350 | 6.93 | 0.346 | 20 | 575 | 80 | PCI-E 2.0 x16 | poclbm | -w 32, don't use vectors | |
4350 | 8.14 | - | - | 730 | 80 | 2.4 | PCI-E 2.0 x16 | Diablo/Windows7 | -w 32. Model: Asus EAH4350 Silent. Memory at 400MHz. Runs at 60°C with ambient at 25°C. |
4550 | 7.23 | 0.289 | 25 | 600 | 80 | PCI-E 2.0 x16 | poclbm | -w 32, don't use vectors | |
4570M | 8.02 | 0.297 | 27 | 680 | 80 | PCI-E 2.0 x16 | Diablo/Windows7 | -w 64, SDK 2.4, Cat 11.4. Model: Sony Vaio NW | |
4570M | 9.6 | 0.300 | 32 | 825 | 80 | PCI-E 2.0 x16 | Diablo/Windows7 | -w 64, SDK 2.4, Cat 11.4. Model: Sony Vaio NW. O/C core 680->825. U/C memory 800->500. | |
4650 | 31.33 | 0.653 | 48 | 650 | 320 | PCI-E 2.0 x16 | poclbm | -w 32, don't use vectors | |
4670 | 36.14 | 0.613 | 59 | 750 | 320 | PCI-E 2.0 x16 | poclbm | -w 32, don't use vectors | |
4670 | 40.11 | 0.679 | 59 | 800 | 320 | AGP x8 | poclbm/Ubuntu 10.10 w/ H == 0 mod | -w 32 -f 0, don't use vectors source | |
4730 | 72.29 | 0.657 | 110 | 750 | 640 | PCI-E 2.0 x16 | |||
4770 | 72.29 | 0.904 | 80 | 750 | 640 | PCI-E 2.0 x16 | |||
4830 | 55.42 | 0.583 | 95 | 575 | 640 | PCI-E 2.0 x16 | |||
4830 | 66.12 | 0.503 | 105 | 700 | 1005 | PCI-E 2.0 x16 | |||
4850 | 75.30 | 0.685 | 110 | 625 | 800 | PCI-E 2.0 x16 | |||
4850 | 84.3 | 0.766 | 110 | 725 | 300 | PCI-E 2.0 x16 | -w64 fan at 70% temp 73C, stock voltage -gui miner | ||
4850 | 90.1 | 0.819 | 110 | 800 | 500 | PCI-E 2.0 x16 | guiminer | -f 30; Tried phoenix and phatk, got same max | |
4850 | 101 | 0.918 | 110 | 817 | 500 | 2.1 | PCI-E 2.0 x16 | guiminer | -f 0, core 817mhz(default 625)@1.123v , mem downclock to 500mhz (default 993) source |
4860 | 67.47 | 0.519 | 130 | 700 | 640 | PCI-E 2.0 x16 | |||
4870 | 92.84 | 0.6189333... (?) | 150 (?) | 830 | 800 | 2.4 | PCI-E 2.0 x16 | Phoenix 1.48 | -k poclbm AGGRESSION=5 (Windows 7 64-Bit, GPU OC 750->830MHz, VRAM UC 900->450MHz, BIOS modded) |
4870 | 104.6 | 0.872 | 120 | 830 | 800 | 2.1 | PCI-E 2.0 x16 | poclbm | -w 256 -f 1, Windows 7 64-Bit, GPU Core OC to 830 MHz, GPU Memory UC to 190 MHz (saves 30 Watt at outlet) |
4870 | 90.36 | 0.602 | 150 | 750 | 800 | 2.1 | PCI-E 2.0 x16 | clmine | |
4870 | 78 | 0.520 | 150 | PCI-E 2.0 x16 | m0mchil's OpenCL/Vista 64bit | source | |||
4890 Sapphire fab. OC | 97.1 | 0.511 | 190 | 870 | 1050 | 2.4 | PCI-E 2.0 x16 | GUIMiner v2011-01-21 Solo settings | No flags options helped. Close all browsers and do full restart of GUIMiner and then Bitcoin via GUIMiner server starter or the browsers GPU accl. will limit to 56~ ish Mhash/s - I can now start browser without slowdowns |
4890 | 102.41 | 0.539 | 190 | 850 | 800 | PCI-E 2.0 x16 | |||
4890 | 108.3 | 190 | 975 | 800 | PCI-E 2.0 x16 | ||||
4850X2 | 150.60 | 0.602 | 250 | 625 | 1600 | PCI-E 2.0 x16 | |||
4870X2 | 180.72 | 0.632 | 286 | 750 | 1600 | PCI-E 2.0 x16 | |||
4870X2 | 180.6 | 0.632 | 286 | 800 | 1600 | PCI-E 2.0 x16 | |||
5450 | 11.99 | 0.631 | 19 | 650 | 80 | PCI-E 2.1 x16 | |||
5450 | 13.74 | - | - | 700 | - | PCI-E 2.1 x16 | poclbm/Linuxcoin v0.2 | -v -w128 tried several options, seems to work best. | |
5450 | 14.12 | - | - | 700 | - | PCI-E 2.1 x16 | Phoenix/Linuxcoin v0.2 | Flags: "DEVICE=0 VECTORS AGGRESSION=4 -v FASTLOOP BFI_INT WORKSIZE=64" Kernel: "phatk" | |
5550 | 40.59 | 1.041 | 39 | 550 | 320 | PCI-E 2.1 x16 | |||
5570 | 59.96 | 1.538 | 39 | 650 | 400 | PCI-E 2.1 x16 | |||
5570 | 64 | 1.641 | 39 | 650 | PCI-E 2.1 x16 | m0mchil's OpenCL/WinXP | source | ||
5570 | 62 | 1.59 | 39 | 650 | 400 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.48 OpenCL/Linux x86_64 | -k phatk DEVICE=0 VECTORS AGGRESSION=4 -v FASTLOOP BFI_INT WORKSIZE=64 |
5570 | 73 | 1.872 | 39 | 700 | 400 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.48 OpenCL/Linux x86_64 | -k phatk DEVICE=0 VECTORS AGGRESSION=4 -v FASTLOOP BFI_INT WORKSIZE=64 |
5570 | 102 | <75 | 950 | 400 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.48 OpenCL/Windows 7 x86 (no Aero) | -k phatk DEVICE=0 VECTORS AGGRESSION=7 -v FASTLOOP BFI_INT WORKSIZE=256 (Reference Sapphire card, 2 additional 120mm coolers, temperature is 79-82C) | |
5650 | 48 | 1.37 | 35 ? | PCI-E 2.1 x16 | m0mchil's OpenCL/Win7-64 | source source -- not TDP but load | |||
5670 | 71.49 | 1.117 | 64 | 775 | 400 | PCI-E 2.1 x16 | |||
5670 | 72 | 1.64 | 44 | 850 | PCI-E 2.0 x16 | poclbm-mod (Win7-64) | Sapphire 100287VGAL card is low power | ||
5670 | 85 | 900 | 400 | PCI-E 2.1 x16 | poclbm | -v -f 0 -w 128 | |||
5750 | 116.24 | 1.352 | 86 | 700 | 720 | PCI-E 2.1 x16 | |||
5750 | 137 | 710 | PCI-E 1.1 x16 | poclbm | -v -f 0 -w 128 using stock memory and GPU clocks | ||||
5750 | 146.4 | 775 | PCI-E 2.0 x16 | GUIMiner v2011-05-21 | -v -w128, AMD Catalyst overclock (775MHz GPU / 1225 MHz Memory) | ||||
5750 | 154.56 | 1.45 | 106 | 830 | 720 | PCI-E 2.1 x16 | -v -w128 -f20 underclocked memory clocks from 1150MHz to 300MHz | ||
5750 | 170 | 870 | PCI-E 1.1 x16 | poclbm | -v -f 0 -w 128 patched BIOS to underclock memory to 300MHz | ||||
5750 | 173 | 875 | PCI-E 1.1 x16 | phoenix | 875/300 w/MSI Afterburner, BFI_INT VECTORS AGGRESSION=12 FASTLOOP=FALSE -k phatk | ||||
5770 | 156.83 | 1.452 | 108 | 850 | 800 | 2.1 | PCI-E 2.1 x16 | clmine | |
5770 | 180 | 1.406 | 128[*] | 950 | 800 | 2.4RC1 | PCI-E 2.1 x16 | poclbm | -v -w 128 -f 30 (*Overclocked wattage calculated here ) |
5770 | 185 | 850 | 1200 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 / phatk | -k phatk VECTORS BFI_INT WORKSIZE=128 FASTLOOP AGGRESSION=7 | ||
5770 | 205.58 | 935 | 300 | 2.1 | PCI-E 2.1 x16 | poclbm 2011-04-28 | -v -w 256 | ||
5770 | 210.7 | 108+ | 950 | 800 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 / win7x86 | mem underclocked 309 mhz, -k phatk DEVICE=0 VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 | |
5770 | 218.35 | 1000 | 1401 | 2.1 | PCI-E 2.0 x16 | DiabloMiner | -w 128 -v 2 (Overclocked to 1Ghz core with 1.2 voltage and Scythe Setsugen 2 cooling system) | ||
5770 | 223 | 100+ | 1050 | 300 | 2.4 | PCI-E 2.1 x16 | guiminer | -v -w256 source | |
5770 | 233 | 100+ | 1050 | 300 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 | VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 -k phatk WORKSIZE=256 source | |
5770 | 236.32 | 100+ | 1050 | 300 | 2.4 | PCI-E 2.1 x1 | phoenix 1.48 | VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 -k phatk WORKSIZE=256 (OC'd and OV'd 1068/300 1.237v) | |
5830 | 244 | 1.52 | 179 | 800 | 1000 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.48 OpenCL/Linux x86_64 | -k phatk DEVICE=1 VECTORS AGGRESSION=6 -v FASTLOOP WORKSIZE=128 BFI_INT |
5830 | 267 | 875 | 1000 | 2.4 | PCI-E 2.1 x1 | Phoenix 1.48 OpenCL/Linux x86_64 | -k phatk DEVICE=1 VECTORS AGGRESSION=6 -v FASTLOOP WORKSIZE=128 BFI_INT | ||
5830 | 245 | 1.28 | 192 | 880 | 900 | 2.4 | PCI-E 2.1 x16 | poclbm (guiminer) | -v -w 256 |
5830 | 248 | 1.29 | 192 | 880 | 500 | 2.4 | PCI-E 2.1 x16 | phoenix 1.46 | -k poclbm VECTORS BFI_INT AGGRESSION=11 |
5830 | 256 | 900 | 300 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 | -k poclbm VECTORS BFI_INT AGGRESSION=7 | ||
5830 | 272 | 1.52 | 179 | 875 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 / phatk / LinuxCoin | 275Mhz Memory clock, 1.125 V (from 1.163), VECTORS AGGRESSION=12 BFI_INT | |
5830 | 275 | 175 | 900 | 500 | 2.1 | PCI-E 2.1 x16 | poclbm (guiminer) Win7x64 | -v -w64 -f10, XFX stock w/ v2.4 SDK = 230Mh/s, v2.1 SDK = +10Mh/s, overclocking core clock by 100 = +30Mh/s, underclocking memory to 500 (ran cooler), and changing workload to -w64 = +5Mh/s. | |
5830 | 285 | 960 | 2.4 | PCI-E 2.1 x16 | phoenix 1.47 / poclbm / Win7 64 | VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 | |||
5830 | 290 | 996 | 2.4 | PCI-E 2.1 x16 | phoenix 1.4 / poclbm / Win7 64 | VECTORS AGGRESSION=12 BFI_INT | |||
5830 | 300 | 970 | 1120 | 2.1 | PCI-E x16 | phoenix 1.48 / phatk / Win7 64 | 300Mhz memory clock BFI_INT AGGRESSION=12 FASTLOOP=false WORKSIZE=256 | ||
5830 | 305 | 984 | 2.4 | PCI-E 2.1 x16 | phoenix 1.4 / phatk / Win7 32 | 400Mhz Memory clock, VECTORS AGGRESSION=12 BFI_INT FASTLOOP=false | |||
5830 | 307 | 996 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 / phatk / Win7 64 | VECTORS AGGRESSION=12 BFI_INT | |||
5830 | 308 | 990 | 375 | 2.1 | PCI-E 2.1 x16 | phoenix 1.48 / phatk / Win7 32 | @ stock voltage VECTORS AGGRESSION=11 -v FASTLOOP=false BFI_INT | ||
5830 | 310 | 1000 | 300 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 / phatk / Linux x86 | VECTORS BFI_INT AGGRESSION=12 FASTLOOP=false WORKSIZE=256 | ||
5830 | 316.35 | 1015 | 375 | 2.1 | PCI-E 2.1 x16 | phoenix 1.48 / phatk / Win7 32 | @ stock voltage VECTORS AGGRESSION=12 -v FASTLOOP=false BFI_INT | ||
5830 | 318 | 1030 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 / phatk / Win7 64 | 385Mhz Memory, VECTORS AGGRESSION=9 BFI_INT | |||
5830 | 319 | 1030 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 / phatk / Xp 64 | 1.2v 355Mhz Memory, VECTORS AGGRESSION=12 BFI_INT | |||
5830 black | 310 | 990 | 300 | 2.4 | PCI-E 2.1 x8 | LinuxCoin 0.2b, phoenix/phatk | (XFX Brand) -k phatk VECTORS BFI_INT WORKSIZE=256 AGGRESSION=11 FASTLOOPS=false | ||
5850 | 240.77 | 1.595 | 151 | 725 | 1440 | PCI-E 2.1 x16 | |||
5850 | 250.26 | 1.657 | 151 | 725 | 1440 | PCI-E 2.1 x16 | opencl client | source | |
5850 | 252 | 1.575 | 160 | 765 | 1440 | 2.3 | PCI-E 2.1 x16 | poclbm 2011-01-25 | |
5850 | 255.3 | 1.593 | 160 | 765 | 1440 | 2.2 | PCI-E 2.1 x16 | poclbm 2011-01-25 | |
5850 | 264 | 1.748 | 151 | 725 | 1440 | 2.4 | PCI-E 1.0 x8 | guiminer-20110501 | -v -w128 |
5850 | 280 | 1.75 | 160 | 765 | 1440 | 2.2 | PCI-E 2.1 x16 | Phoenix 1.3 | with BFI_INT |
5850 | 292 | 1.825 | 160 | 765 | 1440 | 2.1 | PCI-E 2.1 x16 | poclbm 2011-04-28 -v -f 1 | |
5850 | 298 | 1.8620 | 160 | 765 | 1440 | 2.1 | PCI-E 2.1 x16 | poclbm 2011-04-28 -v -f 1 -w 64 | |
5850 | 300 | 1.5460 | 194 | 925 (OC) | 1440 | PCI-E 2.1 x16 | m0mchil's OpenCL | source | |
5850 | 314 | 1.8362 | 171 | 820 (OC) | 1440 | 2.4 | PCI-E 1.0 x8 | poclbm | -v -w128 |
5850 | 330 | 850 @ Stock voltage | 1440 | 2.1 | PCI-E 2.0 x16 | phoenix | EAH5850, miner arguments: -k poclbm DEVICE=1 VECTORS AGGRESSION=8 WORKSIZE=128 BFI_INT FASTLOOP=false | ||
5850 | 335 | 1.8611 | 180 | 890 (OC) | 1440 | 2.4 | PCI-E 2.0 x8 | poclbm | -v -w128, Memory downclocked to 300Mhz |
5850 | 344 | 1.8594 | 185 | 890 (OC) | 1440 | PCI-E 2.0 x16 | phoenix | ||
5850 | 354 | 900 (OC) | 1440 | 2.1 | PCI-E 2.0 x16 | diablo -v 2 -w 128 | Ubuntu 11.04 64-bit Headless, catalyst 11.5, memory downclocked to 300mhz, stock voltage. flashed with atiflash video | ||
5850 | 355 | 900 (OC) | 1440 | 2.1 | PCI-E 2.0 x16 | phoenix 1.48 | Ubuntu 11.04 64-bit, Memory downclocked to 200MHz, VECTORS BFI_INT FASTLOOP=false AGGRESSION=11 WORKSIZE=128 | ||
5850 | 365 | 920 | 1440 | 2.1 | PCI-E x16 | phoenix 1.48 / phatk / Win7 64 | 300Mhz memory clock VECTORS BFI_INT AGGRESSION=13 FASTLOOP=false WORKSIZE=256 | ||
5850 | 382 | 1.8454 | 207 | 995 (OC) | 1440 | PCI-E 2.0 x8 | phoenix | OC 1.177v on core | |
5870M | 152.5 | 750 (OC) | 1000 | 2.1 | PCI-E 2.1 x16 | gui-miner (win-7) | |||
5870 | 313.65 | 1.668 | 188 | 850 | 1600 | 2.1 | PCI-E 2.1 x16 | clmine | |
5870 | 313 | 1.665 | 188 | 900? | 1600 | 2.3 | PCI-E 2.1 x16 | Diablo/Linux | |
5870 | 343 | 1.824 | 188 | 900? | 1600 | 2.1 | PCI-E 2.1 x16 | Diablo/Linux | |
5870 | 355 | 1.888 | 188 | 900? | 1600 | 2.1 | PCI-E 2.1 x16 | poclbm/Linux | |
5870 | 340 | 1.809 | 188 | 850 | 1600 | PCI-E 2.1 x16 | m0mchil's OpenCL | source | |
5870 | 360 | 1.6822 | 214 | 970 | 700 | PCI-E 2.0 x16 | m0mchil's OpenCL w7-64 | -f 0 -v -w 128 source | |
5870 | 377 | 2.008 | 188 | 850 | 1600 | PCI-E 2.0 x16 | hashkill-0.2.5 alpha | -D -G2 | |
5870 | 397 | 930 | 1600 | 2.4 | PCI-E 2.0 x16 | Phoenix 1.48 | -k phatk VECTORS BFI_INT AGGRESSION=10 WORKSIZE=128 | ||
5870 | 408 | 1.8888 | 216 | 980 | 1600 | 2.1 | PCI-E 2.0 x16 | poclbm/Win7x64 | -f 20 -v -w 128, BIT_ALIGN, BFI_INT |
5870 | 400 | 1.9047 | 210 | 950 | 1600 | 2.4 | PCI-E 2.0 x8 | Phoenix 1.3 | -k poclbm VECTORS AGGRESSION=7 FASTLOOP BFI_INT |
5870 | 398 | 1.980 | 201 | 900 | 1600 | PCI-E 2.0 x16 | hashkill-0.2.5 alpha | -D -G2 (GPU OC to 900, memory downclocked to 900) | |
5870 | 420 | 2.0000 | 210 | 950 | 1600 | 2.4 | PCI-E 2.0 x16 | Phoenix 1.48 | -k phatk VECTORS BFI_INT AGGRESSION=14 WORKSIZE=256 -- Memory Clock 300Mhz |
5870 | 421 | 1.9581 | 215 | 975 | 1600 | 2.4 | PCI-E 2.0 x16 | Phoenix 1.47 | VECTORS BFI_INT AGGRESSION=13 -k phatk |
5870 | 440 | 2.0000 | 220 | 995 | 1600 | 2.4 | PCI-E 2.0 x16 | Phoenix | |
5870 | 438 | 1.9819 | 221 | 1000 (OC) | 1600 | 2.1 | PCI-E 2.0 x16 | poclbm/Linux | -v -w 64 -f 1 |
5870 | 445 | 1040 | 1600 | 2.1 | PCI-E 2.0 x16 | poclbm/Windows 7 64 | -v -w 128 -f 1 Crossfired, Water cooled, 890 Mhash/s total, Both cards peak at 450 Mhash/s. Best dual gpu setup me thinks? | ||
5870 | 435 | 990 | 300 | 2.4 | PCI-E 2.0 x8 | LinuxCoin v0.2b phoenix/phatk | (Powercolor brand) -k phatk VECTORS BFI_INT WORKSIZE=256 AGGRESSION=11 FASTLOOPS=false | ||
5970 | 530 | 1.803 | 294 | 725 | 3200 | 2.4.595.10 | PCI-E 2.1 x16 | poclbm/201103.beta3/Windows | -v -w128 -f60 |
5970 | 535.06 | 1.820 | 294 | 725 | 3200 | 2.1 | PCI-E 2.1 x16 | clmine | |
5970 | 560 | 1.905 | 294 | 725 | 3200 | PCI-E 2.1 x16 | Diablo | ||
5970 | 565 | 1.922 | 294 | 725 | 3200 | 2.1 | PCI-E 2.1 x16 | clmine2 | |
5970 | 604 | 2.054 | 294 | 725 | 3200 | 2.1 | PCI-E 2.1 x16 | clmine | |
5970 | 645 | 1.875 | 344 | 850 | 3200 | 2.1 | PCI-E 2.1 x16 | m0mchil/poclbm 03-07-11 | -f1, Debian 6, fglrx-driver 10.9.3 |
5970 | 740 | 2.1511 | 344 | 850 | 3200 | 2.1 | PCI-E 2.1 x16 | phoenix/1.3 | AGGRESSION=12 WORKSIZE=128 VECTORS BFI_INT, memory clock @ 300MHz |
5970 | 755 | 2.2076 | 342 | 848 | 3200 | 2.1 | PCI-E 2.1 x16 | poclbm 28-04-11 | -f 1 -w 256 -v, Ubuntu 10.10, fglrx 11.4, memory clock @ 300MHz |
5970 | 802 | 2.31 | 347 | 850 | 3200 | 2.4 | PCI-E 2.1 x16 | phoenix poclbm Ubuntu 11.04 | -q 6 -k AGGRESSION=19 WORKSIZE=128 BFI_INT VECTORS, fglrx 11.4, mem clock @ 1000MHz |
5870x2 (Ares) | 620 | 850 | 3200 | 2.1 | PCI-E 2.1 x16 | guiminer | -v -w 128 | ||
5870x2 (Ares) | 826 | 0.751 | 1100 | 950 | 3200 | 2.1 | PCI-E 2.1 x16 | phoenix 1.4 w/ Phtak | AGGRESSION=13 WORKSIZE=128 VECTORS BFI_INT Memory @ 300MHz |
5870x2 (Ares) | 826 | 1.18 | 700 | 935 | 3200 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 w/ Phatk | AGGRESSION=13 WORKSIZE=256 VECTORS BFI_INT FASTLOOP=false, memory @ 319 MHz, Windows 7 32-bit |
5870x2 (Ares) | 878 | 0.585 | 1500 | 1000 | 3200 | 2.1 | PCI-E 2.1 x16 | phoenix 1.7 w/ Phtak | AGGRESSION=13 WORKSIZE=128 VECTORS BFI_INT Memory @ 300MHz |
6310M | 9.821 | 0.545 | 18 | 500 | 80 | 2.4 | Integrated/APU | poclbm-gui -v -w128 | HP DM1z 18W TDP is shared with the CPU |
6470M | 24.1 | 2.1 | Integrated/APU | guiminer | |||||
6470M | 31.0 | 2.1 | Integrated/APU | phoenix 1.48 | |||||
6490M | 16.289 | 0.708 | 23 | PCI-E 2.1 x16 | poclbm-mod (Mac OS X 10.6.7) | MacBook Pro early 2011 | |||
6490M | 15.21 | DiabloMiner GUI v2011-05-22 / Mac OS X 10.6.7 | Model: MacBookPro8,2 VRAM: 256MB | ||||||
6570 | 68.0 | 1.133 | 60 | 650 | 480 | 2.4 | PCI-E x16 | guiminer 2011-05-21 with poclbm (Win7-32bit) | no extra option for miner . Sapphire 6570 gddr5 512mb |
6570 | 82.1 | 1.368 | 60 | 650 | 480 | 2.4 | PCI-E x16 | guiminer 2011-05-21 with poclbm (Win7-32bit) | -v -w128 . Sapphire 6570 gddr5 512mb |
6750 | 167.59 | 870 | PCI-E 2.1 x16 | guiminer | -v -f30 -w128 | ||||
6770 | 180 | 850 | 1200 | guiminer | -v -w128 , this was an XFX (OEM) model, GPU @ 850 MHz, mem @ 1200 MHz; I pushed it up to 190 Mhash/s briefly by overclocking, but it crashed the system above that | ||||
6770 | 202 | 960 | 800 | PCI-E 2.1 x1,x4,x8,x16 | phoenix 1.48 | Sapphire 6770 (standard) -q2 -k poclbm DEVICE=0 AGGRESSION=10 VECTORS WORKSIZE=128 BFI_INT FASTLOOP (The PCI-E speed does not affect the mining speed) | |||
6790 | 220 | 150 | 800 | PCI-E 2.1 x16 | Phoenix 1.48 | -k phatk BFI_INT FASTLOOP AGGRESSION=12 VECTORS OC'd to 1ghz, underclocked mem to 300, voltage at 1175 | |||
6850 | 171.59 | 1.351 | 127 | 775 | 960 | 2.1 | PCI-E 2.1 x16 | clmine | |
6850 | 196 | 850 | 960 | PCI-E 2.1 x16 | poclbm | -v -w 128 -f 0 | |||
6850 | 220 | 1.236 | 178[*] | 1000 | 960 | 2.4RC1 | PCI-E 2.1 x16 | poclbm | -v -w 128 -f 30 (*Overclocked wattage calculated here ) |
6850 | 234.8 | 940 | 960 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.3 | AGGRESSION=8 WORKSIZE=128 VECTORS BFI_INT | ||
6850 | 244.2 | 960 | 960 | 2.1 | PCI-E 2.0 x16 | poclbm june-2011 | -v -w 128 | ||
6870 | 232.47 | 1.540 | 151 | 900 | 1120 | PCI-E 2.1 x16 | poclbm -v -w 128 | ||
6870 | 277.47 | 940 | 1120 | PCI-E 2.1 x16 | Phoenix 1.3 | AGGRESSION=8 WORKSIZE=128 VECTORS BFI_INT | |||
6870 | 271 | 150 | 940 | 1100 | 2.4 | PCI-E 2.0 x16 | poclbm -v -w 128 | Debian 6.0.1 x86_64 | |
6870 | 260.1 | 1.611 | 175 | 1001 | 1150 | 2.2 | PCI-E 2.1 x16 | poclbm-gui windows7x86 cat 11.3 | -v -w 128 -f 1 |
6870 | 276 | 1.828 (?) | 151 (?) | 900 | 1120 | 2.4 | PCI-E 2.1 x16 | hashkill-0.2.5 alpha cat 11.4 sdk 2.4 | -G2 -D stock clocks, debian linux 64bit |
6870 | 300.06 | 1.830 | 164 | 1020 | 1120 | 2.4 | PCI-E 2.1 x16 | Phoenix 1.4 cat 11.4 | VECTORS BFI_INT AGGRESSION=8 fastloop mem clock 344 |
6870 | 306 | 1.748 (?) | 175 (?) | 1000 | 1120 | 2.4 | PCI-E 2.1 x16 | hashkill-0.2.5 alpha cat 11.4 sdk 2.4 | -G2 -D overclocked to 1000, debian linux 64bit |
6870 | 300 | 1.72 | 174 | 1038 | 1120 | 2.4 | PCI-E 2.1 x16 | poclbm windows7x86 cat 11.4 | -v -w128 -f1 mem clock 360, fan 100% temp 73C |
6870 | 310 | 1035 | 1120 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 phatk 11.5 sdk 2.4 | BFI_INT VECTORS FASTLOOP=false AGGRESSION=12 WORKSIZE=128, mem clock @ 300MHz, voltage @ 1.300 | ||
6870 | 316 | 1030 | 1120 | 2.4 | PCI-E 2.1 x16 | guiminer 2011-06-09 using phoenix (Win7-32bit) | -k phatk platform=0 device=0 VECTORS BFI_INT AGGRESSION=11 worksize=128 FASTLOOP=false, mem clock @ 228MHz, voltage @ 1.25, Fan @ 40%, Temp @ 73C | ||
6870 | 322 | 1.882 | 170 | 1050 | 1120 | 2.4 | PCI-E 2.1 x16 | phoenix 1.47 phatk 11.5 sdk 2.4 | BFI_INT VECTORS FASTLOOP=false AGGRESSION=12 WORKSIZE=256, mem clock @ 400MHz |
6870 | 329 | 1075 | 372 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48 phatk 11.5 sdk 2.4 | BFI_INT VECTORS FASTLOOP=false AGGRESSION=11 WORKSIZE=256 | ||
6950 | 272 | 900 | 1408 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48/poclbm | max stable @ 1150 mV, AGGRESSION = 7, BFI_INT, MSI 6950 | ||
6950 | 291 | 920 | 1408 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48/poclbm | max stable @ 1200mV, AGGRESSION = 7, BFI_INT, MSI 6950 | ||
6950 | 295 | 930 | 1408 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48/poclbm | max stable @ 1275mV, AGGRESSION = 7, BFI_INT, MSI 6950 | ||
6950 | 300 | 940 | 1408 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48/poclbm | max stable @ 1300mV, AGGRESSION = 7, BFI_INT, MSI 6950 | ||
6950 | 295 | 160 (?) | 810 | 1536 | 2.4.595.0 | PCI-E 2.1 x16 | m0mchil/poclbm 03-07-11 | unlocked shaders, default mem 1250 | |
6950 | 314 | (?) | 800 | 1408 | 2.4.595.0 | PCI-E 2.1 x16 | guiminer/poclbm 05-01-11 | -v -f30 -w128 default mem 1250 Stock Sapphire 6950 1gb | |
6950 | 325 | 200 (?) | 885 | 1536 | 2.4.595.0 | PCI-E 2.1 x16 | m0mchil/poclbm 03-07-11 | unlocked shaders, default mem 1250 | |
6950 | 340 | 895 | 1408 | 2.4 | PCI-E 2.1 x16 | guiminer/poclbm 05-21-11 | -v -w 128, mem @ 500, 1200 mV, MSI 6950 | ||
6950 | 340 | (?) | 800 | 1536 | (?) | PCI-E 2.1 x16 | guiminer/poclbm 05-21-11 | -v -f30 -w128 default mem 1250,Sapphire 6950 1gb, unlocked shaders | |
6950 | 349 | ~200 | 800 | 1408 | PCI-E 2.1 x16 | guiminer/poclbm 05-21-11 | -v -f30 -w128, xfx 6950 xxx 1gb, locked shaders, core 900, mem 650, 79° C | ||
6950 | 360 | 200 (?) | 970 | 1536 | 2.4.595.0 | PCI-E 2.1 x16 | m0mchil/poclbm 03-07-11 | unlocked shaders, default mem 1250 | |
6950 | 360 | (?) | 870 | 1375 | (?) | PCI-E 2.1 x16 | guiminer/poclbm | flashed with 6970 BIOS, -v -f30 -w128 | |
6950x4 | 1316 | 1.513 | 870 | 840 | 1408 | 2.4.595.0 | PCI-E 2.1 x16 | m0mchil/poclbm 03-07-11 | locked shaders, default mem 1250, dual fan 75C typical |
6950 | 417 | +200? | 975 | 1536 | 2.4.595.0 | PCI-E 2.1 x16 | guiminer/poclbm | unlocked shaders, +20% overdrive, mem @ 1250, fan @ 77%, temp 64C, -v -w128, gpu core @ 1145mV | |
6950 | 428 | +200? | 1000 | 1536 | 2.4.595.0 | PCI-E 2.1 x16 | guiminer/poclbm | unlocked shaders, +20% overdrive, mem @ 1250, fan @ 80%, temp 64C, -v -w128, gpu core @ 1160mV | |
6950 | 432 | +200? | 1000 | 1536 | 2.4.595.0 | PCI-E 2.1 x16 | guiminer/poclbm | unlocked shaders, +20% overdrive, mem @ 520, fan @ 80%, temp 76C, -v -w128 -f 2, gpu core @ 1275mV | |
6970 | 323 | 1.468 | 220 | 880 | 1536 | 2.3 | PCI-E 2.1 x16 | poclbm | -w 64, SDK 2.1 not supported on 69xx. |
6970 | 372 | 220 (?) | 900 | 1536 | 2.4 | PCI-E 2.1 x16 | phoenix (svn trunk 05.14.2011) | clock 900/1375, VECTORS BFI_INT AGGRESSION=11 WORKSIZE=128, fan 45% (auto) / temp 90C | |
6970 | 385 | 1.964 | 196 | 900 | 1536 | 2.4 | PCI-E 2.1 x16 | guiminer/poclbm | -v -w128, memory downclocked to 684Mhz, fan @ 70%/temp 81C |
6970 | 380 | 2.4 | PCI-E 2.1 x16 | poclbm | -v -w128 export GPU_USE_SYNC_OBJECTS=1 # to reduce poclbm CPU from 100% to 2% | ||||
6970 | 402 | 1536 | 2.4 | PCI-E 2.1 x16 | guiminer/poclbm | -v -w128, fan 75%/75C, voltage +10% (via CCC), clocks 940MHz/600MHz (via TriXX) | |||
6970 | 403 | (?) | MAX | 1536 | 2.4 | PCI-E 2.1 x16 | guiminer/poclbm | clock Max/50%+stock, -v -w128, fan= 100%/temp 72C (Note: Overclocked using CCC utility under Windows 7, Clock set to Max value w/ 50% increase to memory and 5% increase to voltage) | |
6970 | 423 | 995 | 2.4 | PCI-E 2.1 x16 | phoenix 1.48/poclbm | ATI Tray Tools, Clocks=995/331.25, WORKSIZE=128 BFI_INT AGGRESSION=11 VECTORS ,68C @ 65% Fan, HAF932 Case | |||
6970x2 | 710 | 900/880 | 1536 | 2.2 | PCI-E 2.1 x16 | poclbm | -w 256 | ||
6990 | 670 | 1.94 | 346 | 830 | 3072 | 2.4 | PCI-E 2.1 x16 | poclbm | Catalyst 11.4 source. |
6990 | 708 | 2.05 | 346 | 830 | 3072 | 2.3 | PCI-E 2.1 x16 | mrb's hdminer | BIOS switch at "default" position 2, see source |
6990 | 746 | 1.82 | 410 | 880 | 3072 | 2.3 | PCI-E 2.1 x16 | mrb's hdminer | BIOS switch at "overclocked" position 1, see source |
6990 | 758 | 880 | 2.4 | Phoenix with Poclbm | Catalyst 11.4, OC switch ON, VECTORS AGGRESSION=12 BFI_INT WORKSIZE=128 FASTLOOP=false | ||||
6990 | 771 | 1.8804 | 410 | 880 | 3072 | 2.3 | PCI-E 2.1 x16 | mrb's hdminer | SDK 2.1 not supported on 69xx. Memory clock @ 1280Mhz. |
6990 | 772 | 1.8380 | 420 | 900 | 3072 | 2.3 | PCI-E 2.1 x16 | Phoenix & Poclbm | OC switch ON + overclocked to 900 mhz, VECTORS AGGRESSION=12 BFI_INT WORKSIZE=128 |
6990 | 790 | 900 | 3072 | 2.3 | PCI-E 2.1 x16 | mrb's hdminer | BIOS switch at "overclocked" position 1; with "aticonfig --odsc=900,1260" to further overclock the GPU to 900 MHz and mem to 1260 MHz, see source | ||
6990 | 802 | 915 | 3072 | 2.3 | PCI-E 2.1 x16 | mrb's hdminer | BIOS switch at "overclocked" position 1; with "aticonfig --odsc=915,1260" to further overclock the GPU to 915 MHz and mem to 1260 MHz, see source | ||
6990 | 835 | 890/860 | 3072 | 2.4 | PCI-E 2.1 x16 | phoenix | BIOS switch at "overclocked" position 1; with "aticonfig --adapter=1 --odsc=990,890 and aticonfig --adapter=0 --odsc=960,860" (GPU 0 runs hot). Currently, aticonfig can only underclock RAM to 100mhz below core speed. Command line: phoenix.py -k poclbm VECTORS AGGRESSION=13 WORKSIZE=128 BFI_INT | ||
6990x2 | 1436 | 1.848 | 777 | 880 | 6144 | 2.4 | PCI-E 2.0 x16 x2 | guiminer 2011.05.11 | AUSUM switch set to 1 on both cards; Core left at 880MHz, memory left at 1250MHz; VECTORS AGGRESSION=12 BFI_INT WORKSIZE=128 |
6990x3 | 2094 | 900 | 2.4 | PCI-E 2.0 x16 x8 x4 | poclbm | GPU 900MHz, Memory 1250MHz; poclbm.py -f 0 -w 256 | |||
FirePro V4800 | 79.7 | 775 | 400 | 2.4 | PCI-E 2.1 x16 | GUIMiner v2011-05-01 | |||
FirePro V8700 | 84.8 | 750 | 800 | poclbm-mod.03.24.2011 | |||||
FirePro M5800 | 61.4 | 650 | poclbm-mod.03.24.2011 | Ubuntu | |||||
FirePro V5800 | 119 | 800 | PCI-E 2.0 x16 | GUIMiner v2011-05-01 | Windows 7 32bit | ||||
FirePro V5800 | 144 | 800 | PCI-E 2.0 x16 | GUIMiner v2011-05-01 | -v -w128 (Windows 7 32bit) | ||||
FirePro V7750 | 35.7 | 2.4 | PCI-E 2.0 x16 | GUIMiner v2011-05-21 | Windows 7 64bit | ||||
FirePro V7800 | 254.85 | 2.4 | PCI-E 2.0 x16 | Phoenix 1.48 with poclbm | Debian Squeeze | ||||
FirePro M7820 | 150.0 | 700 | 800 | 2.1 | PCI-E 2.1 x16 | GUIMiner v2011-06-09 | Memory downclocked to 500 from 1000MHz, 169MH/s@800MHz, 181MH/s@860Mhz (max.), only SDK2.1 works, Windows 7 x86 |
Nvidia
Model | Mhash/s | Mhash/J | W | Clock | SP | Comment |
---|---|---|---|---|---|---|
ION | 1.8 | 27 | 16 | poclbm; power consumption incl. CPU | ||
8200 mGPU | 1.2 | 1200 | 16 | 128 MB shared memory, "poclbm -w 128 -f 0" | ||
8400 GS | 2.3 | "poclbm -w 128" | ||||
8400 GS | 1.6 | 128 | 1238 | DiabloMiner -w 128 -f 1 source | ||
8400M GS | 2.0 | |||||
8600M GT | 4.93 | 32 | ||||
8600GT | 5.66 | 1188 | 32 | |||
8600GT OC | 7.3 | 1602 | 32 | poclbm -w 128 source | ||
8800GT | 25 | 0.24 | 105 | 1300 | ||
8800GT | 24.5 | 0.23 | 105 | 1300 | source | |
8800GT | 31.1 | 105 | 1855 | Overclocked 715 GPU / 1030 Memory / 1855 Shader; GuiMiner v2011-05-21 | ||
8800GT | 31.8 | 105 | 1836 | 112 | 713 gpu, 1026 memory. win7x86, phoenix 1.48, -k poclbm WORKSIZE=64 AGGRESSION=5 | |
8800GTS | 16.8 | 0.109 | 154 | source source | ||
8800 GTS | 18.7 | 0.124 | 150 | 1200 | poclbm -w 64 no vectors | |
8800 GTX | 27.5 | 1404 | phoenix 1.48, poclbm, no vectors, 83C with 50C ambient | |||
8800m GTX | 16.3 | rpcminer-cuda Win7-64 | ||||
9300GE | 1.57 | 1300 | 8 | |||
9300GS | 1.69 | 1400 | 8 | |||
9300/nForce 730i | 2.15 | 1200 | 16 | |||
9400GT | 3.37 | 0.067 | 50 | 1400 | 16 | |
9400M (MacBook) | 1.90 | 0.32 | 6 | 700 | poclbm -f 8 no vectors | |
9500GT | 6.75 | 0.135 | 50 | 1400 | 32 | |
9600GSO | 19.88 | 0.237 | 84 | 1375 | 96 | |
9600GSO512 | 11.75 | 0.131 | 90 | 1625 | 48 | |
9600GT | 15.66 | 0.165 | 95 | 1625 | 64 | |
9600GT Zotac | 15 | 1650 | 64 | |||
9600GT OC | 18.8 | <0.198 | >95 | 1981 | 64 | poclbm -w 128 -f 10 source source |
9800GT | 30.36 | 0.289 | 105 | 1800 | 112 | |
9800GT EE | 19.7 | 75 | 1375 | 112 | rpcminer-cuda | |
9800GT OC | 29.5 | 0.283 | 105 | 1836 | 112 | poclbm.py, no options. Memory underclocked to 850Mhz, GPU overclocked to 733Mhz |
9800GTX | 32.54 | 0.232 | 140 | 1688 | 128 | |
9800GTX+ | 35.39 | 0.251 | 141 | 1836 | 128 | |
9800GTX+ | 37.23 | 0.266 | 140 | 1890 | 128 | win7x64 275.27 phoenix(1.48) -k poclbm AGGRESSION=3 WORKSIZE=64 |
9800GTX+ | 40.20 | 140 | 835 | 128 | lowered memory clock higher core, unstable if going higher | |
9800GX2 | 57.83 | 0.294 | 197 | 2x128 | ||
9800GX2 | 28 | 0.142 | 197 | 2x128 | source | |
G210 | 3.38 | 0.111 | 30.5 | 1402 | 16 | |
G210 | 3.79 | 0.124 | 30.5 | 1402 | 16 | poclbm -f 1 |
GT220 | 10.8 | 128 | 1360 | DiabloMiner -w 128 -f 1000 source | ||
GT240 | 19.37 | 0.281 | 69 | 1340 | 96 | |
GT240 | 21.24 | 96 | poclbm-mod -f 0 -v source | |||
GTS250 | 35.39 | 0.244 | 145 | 1836 | 128 | |
GTS250 | 35.2 | 0.243 | 145 | 1836 | 128 | |
GTS250 OC | 37 | 0.255 | 145 | 2047 | 128 | |
GTX260M | 22.5 | 500 | 112 | poclbm 4/28/2011 Asus G71GX runs ~90c without cooling pad | ||
GTX260 | 35.91 | 0.178 | 202 | 1242 | 192 | |
GTX260 | 44 | 0.242 | 182 | 1242 | 216 | source |
GTX260c216 | 40.40 | 0.236 | 171 | 1242 | 216 | |
GTX260c216 | 47.4 | 182 | 1348 | 216 | poclbm -w 256 | |
GTX260c216 | 50.00 | 1050 | 216 | m0mchil GPU client, Windows 7 64-bit, x6 @ 3.5ghz | ||
GTX260c216 OC | 52.0 | 1461 | 216 | "poclbm -w 256 -f 1" | ||
GTX260c216 OC | 58.9 | 756/400 | 216 | Core overclocked, Memory underclocked, Ubuntu 11.04 Classic Session(No Effects) "poclbm -w 256 -f 1" | ||
GTX275 | 50.75 | 0.232 | 219 | 1404 | 240 | |
GTX275 | 58 | 729/1458 | 240 | poclbm -f 0 -w 256 | ||
GTX280 | 46.84 | 0.198 | 236 | 1296 | 240 | |
GTX280 | 64.34 | 0.289 | 245 | 1296 | 240 | phoenix.exe -k poclbm AGGRESSION=6 WORKSIZE=128 (61*C with Accelero XTREME GTX280) |
GTX285 | 64.8 | 1607 | 240 | GuiMiner - Not sure about wattage yet. Still testing. Card runs around 74 C | ||
GTX285 | 53.35 | 0.262 | 204 | 1476 | 240 | |
GTX295 | 89.78 | 0.311 | 289 | 1242 | 480 | |
GTX295 | 120.70 | 289 | 1242 | 480 | GUIMiner no oc. | |
GTX295 | 117.30 | 289 | 1476 | 490 | ||
GT 320M (MacBook Air) | 6.12 | 1212 | 48 | |||
320M (Mac mini 2010) | 7.0 | 0.35 | 20 | 450 | 32 | poclbm no extra options, windows 7 x64 |
GT 330M | 7.97 | Model: MacBookPro6,2 VRAM: 512MB Software: DiabloMiner GUI v2011-05-22 / Mac OS X 10.6.7 | ||||
GT 330M (Sony Vaio Z) | 7.8 | 0.71 ( 0.3 total) | 11 (26w total) | 1045 | 48 | |
GTS 350M (Toshiba A665-3DV) | 17.0 | 14 | 1080 | DiabloMiner-Windows.exe | ||
GTS 360M | 25.0 | [toshiba qosmio laptop, ~150-165*F stock fans] | ||||
GTS 360M (ASUS G60jx) | 20.0 | everythins is stock, it cannot sustain. it reaches 90 degrees and freezes. | ||||
GT430 | 20.24 | 0.413 | 49 | 1400 | 96 | |
GTS450 | 45.28 | 0.427 | 106 | 1566 | 192 | |
GTX460SE | 56.39 | 0.376 | 150 | 1300 | 288 | |
GTX460 | 66.32 | 814 | 336 | rpcminer-cuda 20110605, Graphics Clock @ 814MHz, Memory @ 1555MHz | ||
GTX460 | 68.31 | 0.427 | 160 | 1350 | 336 | |
GTX460 768MB | 57.8 | ? | 1350 | 336 | rpcminer-cuda -gputhreads=320 -gpugrid=336 | |
GTX460 768MB (MSI Cyclone 768D5/OC) | 75.1 | ? | 930 | 336 | rpcminer-cuda on Win7 x64 with ForceWare 275.33. MSI Afterburner set to core: 930MHz, shader: 1850MHz, core voltage: 1.087V, memory: 1600MHz. Runs at 58°C with fan at 75% (ambient 25°C). | |
GTX460 1GB DirectCU | 72.3 | ? | ? | 1672 | 336 | rpcminer-cuda -gputhreads=320 -gpugrid=336 |
GTX460 (2 cards) | 102 | 0.319? | 320? | 1350 | source | |
GTX460 (2 cards) OC | 127 | 0.374 | 340 | 1620 | 2x 336 | rpcminer-cuda -gpugrid=128 -gputhreads=128 ver.20110227 |
GTX465 | 64.41 | 0.322 | 200 | 1215 | 352 | |
GTX470 | 81.98 | 0.381 | 215 | 1215 | 448 | |
GTX470 | 94.7 | 1414 | ||||
GTX470 | 111.9 | 215 | 1650 | 448 | ||
GTX470 | 115 | 1616 | phoenix 1.46 poclbm VECTORS BFI_INT FASTLOOP AGGRESSION=6 | |||
GTX480 | 101.28 | 0.405 | 250 | 1401 | 480 | |
GTX560 Ti | 67.7 | 0.39 | 170 | 1700 | 384 | standard EVGA 560, no overclock |
GTX560 Ti | 74.8 | 0.41 | 180 | 1700 | 384 | gigabyte 900Mhz clock; -w 512 -v |
GTX560 OC | 86.7 | <0.51 | >170 | 1800 | 384 | rpcminer-cuda source |
GTX570 | 105.83 | 0.483 | 219 | 1464 | 480 | |
GTX570 | 125 | --- | 219 | 750 | 480 | rpcminer-cuda.exe -aggression=11 -gpugrid=480 -gputhreads=512 |
GTX580 | 140.05 | --- | 244 | 1544 | 512 | |
GTX590 | 193.1 | --- | --- | 1215 | 2x 512 | poclbm -v -w 256, Win |
Quadro FX 580 | 5.7 | 0.14 | 40 | 1125 | 4 | rpcminer-cuda, Win, -gpugrid=128 -gputhreads=512 |
Quadro FX 770M | 5.75 | 500 | 32 | DiabloMiner-Windows.exe BFI_INT FASTLOOP AGGRESSION=6, Win | ||
Quadro FX 770M | 6.39 | 500 | 32 | DiabloMiner-Windows.exe BFI_INT FASTLOOP AGGRESSION=6 w 64, Win 7x64 | ||
Quadro FX 880M | 9.6 | poclbm/guiminer | ||||
Quadro FX 1600M | 6 | 0.12 | 50 | 625 | 32 | rpcminer-cuda, Win |
Quadro FX 2000M | 23 | 58 | phoenix 1.48, -k poclbm, VECTORS, AGGRESION=6, Lenovo W520 platform | |||
Quadro FX 3600M | 36 | -- | 70 | 500 | 96 | DiabloMiner, win |
Quadro NVS 135M | 1.05 | 0.1 | 10 | 800 | 1 | |
Quadro NVS 295 | 1.7 | 0.07 | 23 | 567 | 8 | phoenix |
Quadro NVS 3100M | 3.6 | 0.257 | 14 | 600 | 16 | rpcminer-cuda, Win, CUDA 3.1.1 |
Quadro 5000 | 62 | --- | 152 | 513 | ? | rpcminer-cuda.exe -aggression=10 gpugrid=256 gputhreads=512; if anyone can provide info about the number of shader processors of this card, this would be the value of choice for gpugrid << This card has 352 cores. source |
Tesla C1060 | 52.5 | 1296 | 240 | poclbm, Win7x64 | ||
Tesla M2050 | 79.8 | 1550 | 448 | DiabloMiner | ||
Tesla M2050 | 100 | 0 | 0 | - | 512 | Amazon AWS CUDA RPC Miner & CUDA 2.0 |
Tesla S1070 | 155.2 | rpcminer-cuda, Linux, CUDA 3.2, 4 instances (-gpu=0 through -gpu=3) | ||||
GTX280x2 | 102.7 |
CPUs/APUs
A lot of nice data can be pulled from this thread to seed this section.
Might you wish to throttle CPU load a bit, so it doesn't reach 100°C, it can be done with Battle Encoder Shirase to a margin, like, -15% of available CPU cycles.
Often, the best combination to be is to throttle CPU miner to -5% AND set it to least of priority levels, so as not to choke GPU miner up.
AMD
Model | nprocs | Mhash/s | Mhash/J | TDP [W] | CPU Clock | Mhash/s CPU | Mhash/s GPU | GPU | GPU Clock | SP | Software | Notes |
---|---|---|---|---|---|---|---|---|---|---|---|---|
4x Opteron 6174 | 48 | 115 | 0.36 | 320W | 2.2 GHz | 2.4 | cpuminer v0.8.1 | --alg 4way --threads 48 | ||||
2x Opteron 6128 | 16 | 32.4 | 0.141 | 230W | 2 GHz | 32.4 | 0.3.19 | -4way | ||||
Athlon XP 2000+ | 2 | 0.62 | 0.009 | 70W | 1.67 GHz | 0.62 | 0.3.18/Ubuntu | source source | ||||
Athlon 64 3500+ | 1 | 1.18 | 0.013 | 89W | 2.54 GHz | 1.18 | ufasoft v0.4 | overclocked (originally 2.2 GHz) | ||||
Athlon 64 X2 3800+ | 2 | 1.73 | 0.03 | 65 W | 2.00 GHz | 1.73 | cpuminer (v0.8.1-1-g69529c3) | -algo=4way | ||||
Athlon 64 X2 4000+ | 2 | 1.9 | 0.02 | 65W | 2.1 GHz | 1.9 | rpc-miner | |||||
Athlon 64 X2 4400+ | 2.09 | 0.032 | 65W | 2.3GHz | 2.09 | 0.3.19/Win x64 | source | |||||
Athlon 64 X2 6000+ | 2 | 2.81 | 0.02 | 125W | 3 GHz | 2.81 | source | |||||
Athlon 64 X2 6400+ Black Edition | 2 | 2.9 | 0.023 | 125W | 3.2 GHz | 2.9 | 0.3.20.2 BETA/Win 7 x64 | -4way | ||||
Athlon II X2 240e | 2 | 2.71 | 0.06 | 45W | 2.81 GHz | 2.71 | bitcoind | source | ||||
Athlon II X2 250 | 2 | 5.6 | 0.09 | 65W | 3.01GHz | 5.6 | bitcoin-miner 0.11 | |||||
Athlon II X4 630 | 4 | 10.7 | 0.11 | 95W | 2.8 GHz | 10.7 | bitcoin-miner 0.4 | |||||
Phenom II X3 720 | 3 | 3.8 | 0.04 | 95W | 2.8 GHz | 3.8 | 0.3.1x/WinXP | source | ||||
Phenom X4 9950 BE | 4 | 9.3 | 0.07 | 126W | 2.6 GHz | 2.32 | bitcoin-miner 0.13/WinXP | No GPU | ||||
Phenom II X3 720 | 3 | 7.2 | 0.08 | 95W | 2.8 GHz | 7.2 | cpu-miner 0.2.1/WinXP | source | ||||
Phenom II X4 810 | 4 | 5.0 | 95W | 2.8 GHz | rpcminer-cpu | |||||||
Phenom II X4 810 | 4 | 9.5 | 95W | 2.8 GHz | rpcminer-4way | |||||||
Phenom II X4 810 | 4 | 10.5 | 95W | 2.8 GHz | ufasoft v0.10 | |||||||
Phenom II X4 955 | 4 | 11 | 0.09 | 125W | 3.2 GHz | 11 | rpcminer-4way | |||||
Phenom II X4 965 | 4 | 12 | 0.09 | 140W | 3.4 GHz | 11 | rpcminer-4way | |||||
Phenom II X6 1055T | 6 | 15.84 | 0.13 | 125W | 2.82 GHz | 15.84 | bitcoind | source | ||||
Phenom II X6 1090T | 6 | 18 | 141W | 3.50 GHz | 3 | minerd | ||||||
Phenom II X6 1100T | 6 | 22 | 0.176 | 125W | 3.82 GHz | 22 | bitcoin-miner | Aciid#bitcoin-dev | ||||
Zacate E-350 | 2 | 11 | 0.615 | 18W | 1.6 Ghz | 1.231 | 9.831 | HD6310M | 492 Mhz | 80 | poclbm -v -w128 + Ufasoft 0.7 | stock speeds |
Zacate E-350 | 2 | 12 | 1.648 Ghz | 1.252 | 10.87 | HD6310M | 492 Mhz | 80 | poclbm -v -w 256 -f 1 | "autotune" speed with ASUS EFI BIOS |
ARM
Model | p/t | Mhash/s | Mhash/J | ACP [W] | Clock | Version | Comment |
---|---|---|---|---|---|---|---|
ARM1136EJ-S | 1 | 0.11 | ? | ? | 0.528 GHz | cpuminer git | T-Mobile Pulse, inside Debian chroot, 'c' algo |
Cortex-A8 | 1 | 0.125 | 0.36 | 0.35 W | 0.6 GHz | cpuminer git (2011-03-26) | Nokia N900: 'cryptopp' |
Cortex-A8 | 1 | 0.2 | 0.57 | 0.35 W | 0.6 GHz | cpuminer git (2011-03-26) | Nokia N900: 'c' algo |
2x Cortex-A9 | 2 | 0.57 | 1.14 | 0.5 W | 1.0 GHz | cpuminer git (2011-03-24) | Toshiba AC100, ubuntu, 'c' algo |
Intel
Model | p/t | Mhash/s | Mhash/J | ACP [W] | Clock | Version | Comment |
---|---|---|---|---|---|---|---|
Pentium III mobile ? | 1 | 0.3 | 0.014 | 21W | 1.07 GHz | 0.3.1x/Win2K | source source |
Pentium M 1.6ghz | 1 | .4 | 1.6 GHZ | minerd (jgarzik's 1.0) | cryppto, Windows 7 | ||
Pentium M 1.73ghz | 1 | .5 | 1.73 GHZ | minerd (jgarzik's 1.0) | cryppto, Windows 7 | ||
Old Xeon 512k (Dual) | 2x1/2 | 2.0 | ? | ? | 3.06GHz | cpuminer (v0.8.1-1-g69529c3) | HT disabled, algo=4way (twice as fast as the 2nd best algo) |
Pentium 4 2.0A | 1 | 0.85 | 2.0 GHz | ufasoft-0.4/WinXP | -g no -t 2 | ||
Pentium Dual-Core E2180 | 2/2 | 1.75 | 2.0 GHz | rpcminer-cpu | Win7-64 | ||
Pentium Dual-Core E2180 | 2/2 | 4.1 | 2.0 GHz | cpuminer | sse2_64 | ||
Pentium Dual-Core E2180 | 2/2 | 4.5 | 2.0 GHz | ufasoft v0.11 | Win7-64 | ||
Pentium Dual-Core E5400 | 2/2 | 2.27 | 0.03 | 65W | 2.7 GHz | bitcoind | source |
Celeron E330 | 2/2 | 2.2 | 0.03 | 65W | 2.5 GHz | 0.3.19/Ubuntu10.04 | source |
Core 2 Quad Q6600 | 4/4 | 11.0 | 105W | 2.40 GHz | bitcoin-miner 0.10 | -a 60 -g no -t 4 | |
Core 2 Quad Q9400 | 4/4 | 11 | 0.046 | 95W | 2.66 GHz | bitcoin-miner 0.10 | -a 60 -g no -t 4 |
Core 2 Quad Q9650 | 4/4 | 18.67 | 95W | 4.00 GHz | bitcoin-miner 0.10 | -a 60 -g no -t 4 | |
Core i3 530 | 2/4 | 8.31 | 0.10 | 80W | 3.66 GHz | Ufasoft 0.7 | -v -a5 -g no -t 4 |
Core i3 M350 | 2/4 | 1.48 | 0.04 | 35W | 2.27 GHz | bitcoind | source |
Core i5 M450 | 2/4 | 1.8 | 0.05 | 35W | 1.2 GHz | 0.3.17/Win7-54 | source |
Core i5-650 | 2/4 | 5.1 | 0.04 ? | 3.2 GHz | cpuminer-0.7 | -4way | |
Core i5-750 | 4/4 | 14 | 3.2 GHz | bitcoin-miner 0.11 | -a 5 -g no -t 4 | ||
Core i5 ? | 4/? | 6.5 | client from svn | source | |||
Core i5-2400 | 4/4 | 4.5 | 0.05 | 95W | 3.1 GHz | cpuminer git (2011-01-22) | cryptopp_asm32 |
Core i5-2400 | 4/4 | 14 | 0.15 | 95W | 3.1 GHz | cpuminer git (2011-03-26) | sse2_64 |
Core i5 2500K | 4/4 | 20.6 | 4.2GHz | bitcoin-miner | -g no | ||
Core i7 620M | 2/4 | 1.888 | 2.66 GHz | RPCMiner GUI v2011-05-22 / Mac OS X 10.6.7 | Model: MacBookPro6,2 RAM: 4GB | ||
Core i7 920 | 4/8 | 19.2 | 0.10 | 195 | 4.0 GHz (x21) | ufasoft | -a 5 |
Core i7 950 | 4/8 | 5.88 | 0.039 | 150W | 3.83 GHz (x23) | bitcoin-0.3.20.2 Win7-64 | |
Core i7 950 | 4/8 | 18.9 | 0.126 | 150W | 3.83 GHz (x23) | ufasoft v0.4 | |
Core i7 980x | 6/12 | 19.2 | 0.15 | 130 | 4.4 GHz (x33) | cpuminer/Win7-64 | |
Core i7 980x | 6/12 | 8.7 | 3.9 GHz (x27) | 0.3.17/Win7-64 | |||
Core i7 2635QM | 4/8 | 2.93 | 2.00 GHz | RPCMiner GUI v2011-05-22 / Mac OS X 10.6.7 | Model: MacBookPro8,2 RAM: 4GB | ||
Core i7 620M | 2/4 | 6.3 | 0.18 | 35 | 2.66 GHz | ufasoft v0.4 | |
Core i7 2600k | 4/4 | 6.7 | 4.00 GHz | phoenix 0.48 | |||
Core 2 Duo U7600 | 1 | 1.1 | 1.2 GHZ | minerd (jgarzik's 1.0) | cryppto, Windows 7 | ||
Core 2 Duo E5200 | 2/2 | 6.2 | 0.086 | 72W | 2.76 Ghz | Ufasoft/Win7-64 | TDP is 65W + 7W overclock |
Core 2 Duo E6550 | 1/2 | 2.45 | ? | ? | 2.33 GHz | cpuminer 0.7.1 (Linux) | --algo=sse2_64 |
Core 2 Duo E6850 | 2/2 | 6.75 | 0.10 | 65W | 3.0 Ghz | ufasoft-0.3 | |
Core 2 Duo E7300 | 2/2 | 7.76 | 0.11 | 70W | 3.33 GHz (o/c?) | ufasoft-0.3 | miner optimized for Intel Core |
Core 2 Duo E7300 | 2/2 | 2.52 | 0.04 | 65W | 2.66 GHz | bitcoind | source |
Core 2 Duo E8200 | 2/2 | 2.3 | 0.035 | 65W | 2.66GHz | rpcminer-cpu | |
Core 2 Duo E8400 | 2/2 | 6.9 | 0.106 | 65W | 3.0 GHz | ufasoft v0.10 | windows 7/64bit (-t 2) |
Core 2 Duo T6400 | 2/2 | 4.2 | 0.12 | 35 W | 2.00 GHz | cpuminer git (Linux) | --algo=sse2_64 |
Core 2 Duo T7250 | 2/2 | 4.5 | 0.13 | 35 W | 2.00 GHz | bitcoin-miner 0.13/WinXP | No GPU |
Core 2 Extreme X9000 | 2/2 | 2.37 | 2.8 GHz | rpcminer-cpu | Win7-64 | ||
Core 2 Extreme X9000 | 2/2 | 6.2 | 2.8 GHz | ufasoft v0.11 | Win7-64 | ||
Core 2 Extreme X9000 | 2/2 | 7.2 | 3.2 GHz | ufasoft v0.11 | Win7-64 Overclocked from 2.8 GHz to 3.2 GHz | ||
Xeon 2.8 | 2/2 | 0.8 | 2.8 GHz | cpuminer | cryptopp_asm32 | ||
Xeon 3060 | 1/2 | 2.03 | 0.03 | 65W | 2.4GHz | cpuminer 0.8.1 (Linux) | --algo=cryptopp_asm32 |
Xeon Prestonia 2.4 (dual) | 2x1/2 | 2.16 | 0.017 | 130W | 2.4 GHz | ufasoft v0.4 | |
Xeon X5355 (dual) | 2x4/4 | 10.13 | 0.16 | 120W | 2.66GHz | bitcoind | Roughly the same speed as the "c" algo in cpuminer |
Xeon X5355 (dual) | 2x4/4 | 22.76 | 0.09 | 120W | 2.66GHz | cpuminer (v0.8.1-1-g69529c3) | -O2 -march=core2, algo=sse2_64 |
Xeon E5335 | 4/4 | 9.35 | 0.12 | 80W | 2.00 GHz | ufasoft v0.11 | Vista-32 |
Xeon E5440 | 4/8 | 7.3 | ? | 80W | 2.66 GHz | Kiv's poclbm-gui | FIXME: Either wrong model # or wrong threads/speed info |
Xeon E5520 | 4/8 | 6.5 | 0.08 | 80W | 2.27 GHz | bitcoind | source |
Xeon E5530 | 4/8 | 7.14 | 0.09 | 80W | 2.4 GHz | bitcoind | source |
Xeon E5630 (dual) | 2x4/8 | 8 | 0.1 | 80W | 2.53 GHz | 0.3.17/Win7-64 | source |
Xeon E6520 (dual) | 2x4/8 | 24.7 | ? | ? | 2.53 GHz | ufasoft v0.10 | windows 2008 R2 64bit (-t 16) |
Xeon E7520 (dual) | 2x4/16 | 18 | ? | 95W | 1.87 GHz | ufasoft v0.10 | windows 2008 R2 64bit (-t 16) |
Atom N230 | 1/2 | 0.375 | 4W | 1.6 GHz | rpcminer-cpu | ||
Atom N230 | 1/2 | 0.245 | 4W | 1.6 GHz | rpcminer-4way | ||
Atom N230 | 1/2 | 0.97 | 4W | 1.6 GHz | ufasoft v0.10 | ||
Atom N270 | 1/2 | 1.19 | 0.24 | 5W | 1.6 GHz | ufasoft v0.10 |
Other
Model | p/t | Mhash/s | Mhash/J | ACP [W] | Clock | Version | Comment |
---|---|---|---|---|---|---|---|
Cell | 6 | 21 | 0.35 | 60W | 3.2 GHz | cellminer | Sony Playstation 3 (FAT): Needs custom firmware (no links to it, potential issues with Sony assholes.) source source Total power usage of PS3 fat is 120W but only the Cell cpu is active. |
Cell | 6 | 21 | 0.7 | 35W | 3.2 GHz | cellminer | Sony Playstation 3 (SLIM): Total power usage of PS3 slim is 70W but only the Cell cpu is active. |
MIPS | 1 | 0.026 | ? | ? | 200 MHz | cpuminer | ASUS WL-500G Deluxe router running OpenWrt |
VIA Eden | 1 | 1.3 | 0.17 | 8W | 1600 MHz | cpuminer | VIA Eden w/ Padlock |
PowerPC 7447A | 1 | 0.53 | 1420 MHz | cpuminer |